Re: [Mer] 0.15 released - another month + a week gone by
 

I use my swap partition for both maemo and mer. You might have forgot to select the swap partition during the installation. Mer ask you twice about swap. First during installation when you were selecting what partition to install mer it also ask you what partition you want to use for swap. So then after the installation is done and you have rebooted your device to mer booting for the first time, it will show you your swap partition that you had selected and ask you to enable it. After that it will be set.

Re: [Mer] 0.15 released - another month + a week gone by
 

Thanks again !

Well my mer (.15) asked only once, (I'm fairly sure).

BUT : Swap problem solved, I guess.
It seems to have been the known confusion about the numbering of mmc cards in maemo.
When installing mer, I designated mmcblk1p4 for swap.
In mer this same partition seems to be called mmcblk0p4. !!.

So sudo swapon mmcblk0p4 worked, with 0 instead of 1.

Re: [Mer] 0.15 released - another month + a week gone by
 

This is the first time I've tried Mer, so forgive my newbie excitement, but WOW. That's really nice. Given the original write-up saying not to expect much, I guess I wasn't expecting it to look and work so good/well.

Unfortunately, coming from a relative Linux rookie, it's not ready for day-to-day use, since it's still missing a lot, especially for those less technical with Linux. In dinking around with it, I also frequently reached some dead ends, where I couldn't do anything, couldn't exit, or couldn't figure out how.

I'll keep messing with it, and provide feedback (wherever I can). I think that even though I'm not extremely technical (when it comes to Linux), the feedback I provide should be able to help Mer reach the "fluffiness" level that it will need to be in order to be used on a day-to-day basis.

Oh, and the install....painless. I chose the easy auto method, installing it to my internal memory card, and despite all my fretting, it was for nothing. It was just as easy to install Ubuntu on my notebook PC.

Thanks to everyone working on this! Great work!

-- Chris

Re: [Mer] 0.15 released - another month + a week gone by
 

Install the Mer kernel before install and that should help. :)

Re: [Mer] 0.15 released - another month + a week gone by
 

Hi All

I have just installed Mer 0.15 on my 770. Crash on first boot. Second boot did work perfectly. Wifi (WPA) works fine.

Overall, this WIP is pretty impressive, I must say. Keep going!

Some bugs (I did not see them in the issues list):

Brightness control does not work
(Del-)Selecting shift on the virtual keyboard is very slow.

Screen rotate is broken: one is left with the nice mer background.

And it seems that the orientation of the screen is saved somewhere: when I reboot, I am stuck now at this point. Where can I change this setting (by mounting the partition from maemo)?

Re: [Mer] 0.15 released - another month + a week gone by
 

Thanks Stskeeps ! , but I (new to linux) am not following you.

Mer installer runs in maemo, so how can it's mmc numbering be influenced by a mer kernel being installed outside of maemo ?

Mer inst. guide did not help, I found a kernel there (mer-armel-n8x0-standard-v0.15.zImage), is that the one ?
( Do I just extract it to a fresh ext2 partition, or how do I install it ? )

( Remembering different mmc numbers in maemo/mer is no problem now that I realized it,)
but does your method make other differences ?


( My other question (#58) , can the onscreen keyboard (N810) be prevented from automatically popping up ? )


EDIT :
Comment on mer .
In the settings app, where you can change the ordering of the icons in the top bar,
I once moved the "mer" icon (which gives the apps menu-window) to the right end (bottom in the list).
>> I could not open any apps as only the left half of the apps menu-window showed up at the right end of the screen. Same after reboot.
Could I have avoided a reinstall ?

Re: [Mer] 0.15 released - another month + a week gone by
 

I did something similar. See post #52 above.

Re: [Mer] 0.15 released - another month + a week gone by
 

GPEsummary crash my install for the second time. Bummer! After I installed it took forever to finish installing and then give the error message that it couldn't find the todo folder and hang my n810. Does the same thing after reboot and then hangs the device at boot with the blue background. Is anyone else having problems with the gpe apps, todo, calender, summary, etc? I am trying to figure out which one of them is causing the problem. The last time I thought it was the todo app but, I didn't install it this time.

Re: [Mer] 0.15 released - another month + a week gone by
 

Some boring post from me ;)
Open hald-addon-bme is really nice, but that package name leads to confusion, so I propose to name it hald-addon-bme-free
So there will be no need to resolve some package conflicts/confusion, because Nokia's hald-addon-bme is not the same thing as Mer's one.

Re: [Mer] 0.15 released - another month + a week gone by
 

can we install that network-manager applet to maemo?