| Prev |   1   2   3   | Next
maemo.org - Talk
Page 2 of 3
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N900 (https://talk.maemo.org/forumdisplay.php?f=44)
-   -   N900 Screen Calibration (https://talk.maemo.org/showthread.php?t=36532)

Freigeist 2009-12-10 17:51
Re: N900 Screen Calibration
 
Have you used the stylus for calibration? I did the same thing and recalibrated the screen with my fingers and I total screwed it up. Then I did it again but this time with the stylus and took really care to hit the right spots and it's now as good as out of the box.

ABerri 2009-12-14 21:12
Re: N900 Screen Calibration
 
Yes I will try with the stylus again although I'm getting used to my current settings. Thanks again everyone!

youth 2009-12-19 15:03
Re: N900 Screen Calibration
 
I think I'd like to do the same thing. Tried the sketch program w/o calibration & lines were centered with the stylus near the sides & after calibration lines appearing to be rendering off center of the stylus tip near the sides & centered in the middle.

Mara 2009-12-19 15:23
Re: N900 Screen Calibration
 
I noticed that I need to calibrate by pressing slightly inwards on each dot horizontally to get optimal calibration. The vertical calibration worked fine when centered on each circle.

shadowjk 2009-12-20 16:41
Re: N900 Screen Calibration
 
Oops, I also did the mistake of trying to calibrate screen. Now it's off on the left side and on bottom. Recalibrating by tapping to the right of the left targets works somewhat, but it takes alot of trial and error.. :(

Anyone figure out how to get the defaults back yet?

Mandibela 2009-12-20 16:50
Re: N900 Screen Calibration
 
I'd just like to say that I too noticed that the calibration does not quite work as it is supposed to.

Vertically the calibration dots seem to be in the wrong position; as noted here, tapping nearer the centerline (in my case at the inner ring) is necessary to get the most accurate calibration.

shadowjk 2009-12-20 18:03
Re: N900 Screen Calibration
 
I found the calibration tool on gitorious, seems there was/is an internal nokia bug regarding the corners miscalibration. I managed to build a new tscalibrate copy from the git repository, and tested it on my device. Calibration is now much better.

I'd assume this improved calibration would appear in a firmware upgrade at some point...

claesbas 2010-01-04 07:15
Re: N900 Screen Calibration
 
Is this a known bug? because I am having hard time to calibrate the screen aswell. Left side is abit inward and the right side is abit on the black to the right..

titan 2010-04-20 21:31
Re: N900 Screen Calibration
 
check http://talk.maemo.org/showthread.php?p=620086

blackwolf 2010-04-30 11:07
Re: N900 Screen Calibration
 
Quote:
Originally Posted by ABerri (Post 420219)
Anyone know how I can get it back to factory setting? Not the entire phone, just the screen calibration.

Thanks!
Open an xterm and run: sudo tscalibrate reset


| Prev |   1   2   3   | Next
All times are GMT. The time now is 18:08.
Page 2 of 3
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8