| Prev |   8     9   10   11     12   | Next | Last
maemo.org - Talk
Page 10 of 16
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N900 (https://talk.maemo.org/forumdisplay.php?f=44)
-   -   How to reflash N900 in Windows 7 64bit (https://talk.maemo.org/showthread.php?t=40226)

youday4u 2011-04-13 10:47
Re: How to reflash N900 in Windows 7 64bit
 
i dont use sd card and i havnt overclocked .if i switch off and on it will work fine.

i am fed up of this.not sure what is the cause..

youday4u 2011-04-14 06:23
Re: How to reflash N900 in Windows 7 64bit
 
guys is there any way to fix my n900 ??

Bartcore3 2011-04-15 09:15
Re: How to reflash N900 in Windows 7 64bit
 
Quote:
Originally Posted by codetracer (Post 849980)
How to get N900 flasher to work in Windows 7 64-bit (x64).
  • Install Flasher 3.5 - http://tablets-dev.nokia.com/maemo-d...-downloads.php
  • Download libusb-win32-bin-1.2.2.0.zip - http://sourceforge.net/projects/libusb-win32/
  • Press U while starting N900 and attach USB
  • Wait for the original driver to install.
  • Run inf-wizard.exe (bin folder in zip) - Run as Administrator
    1. Press "Next"
    2. Search in list and select "0x0421 - 0x0105 - Nokia N900 (Update Mode)"
    3. Press "Next"
    4. Press "Next"
    5. Save .inf file
    6. Press "Install Now"
    7. Press "Install this driver software anyway" on warning message.
    8. You should get "Installation successful." and press OK.
  • Check Windows Device Manager for "libusb-win32 devices", expand and verify "Nokia N900 (Update Mode)" can be found.
  • Now you are ready to run Flasher 3.5 with your parameters.
i realy loved the messages while waiting :D
did you make this program?

youday4u 2011-04-16 16:20
Re: How to reflash N900 in Windows 7 64bit
 
guys help me ASAP

got all the problems again.what to do ?

Cloudpunisher 2011-05-06 02:42
Re: How to reflash N900 in Windows 7 64bit
 
try this

You can use Microsoft Virtual PC - Also known as XP Mode. Professional, Enterprise, and Ultimate editions of Windows 7 come with Windows XP mode, but must be downloaded and installed before use.
1. Connect your N900 in flasher mode; Hold u on the device keyboard, then connect the USB cable.
2. Wait for Windows to install the appropriate drivers.
3. Start Microsoft Virtual PC / Windows XP mode/
4. Allow the Virtual PC to have access to your N900: (On the top bar): USB > Nokia N900 (Update mode) (Attach). (If it doesn't say (update mode), you didn't enter update mode correctly by pressing "u". Remove the cable and try again.)
5. Wait for Windows to install the appropriate drivers.
6. When it is finished, proceed with the normal flashing steps above.

There have been numerous reports on the forums of people trying to flash the rootfs/FIASCO and eMMC with Windows 7 64 bit XP Mode/Virtual PC, where the rootfs/FIASCO image flashed just fine, but the eMMC image stays at "no suitable device found. Waiting". Again allow the Virtual PC to have access to your N900: (On the top bar): USB > Nokia N900 but *NOTICE* now it will be Nokia N900 (PC-Suite mode) (Attach). Now the flashing will start normally.

vivmak 2011-05-11 21:29
Re: How to reflash N900 in Windows 7 64bit
 
Quote:
Originally Posted by codetracer (Post 849980)
How to get N900 flasher to work in Windows 7 64-bit (x64).
  • Install Flasher 3.5 - http://tablets-dev.nokia.com/maemo-d...-downloads.php
  • Download libusb-win32-bin-1.2.2.0.zip - http://sourceforge.net/projects/libusb-win32/
  • Press U while starting N900 and attach USB
  • Wait for the original driver to install.
  • Run inf-wizard.exe (bin folder in zip) - Run as Administrator
    1. Press "Next"
    2. Search in list and select "0x0421 - 0x0105 - Nokia N900 (Update Mode)"
    3. Press "Next"
    4. Press "Next"
    5. Save .inf file
    6. Press "Install Now"
    7. Press "Install this driver software anyway" on warning message.
    8. You should get "Installation successful." and press OK.
  • Check Windows Device Manager for "libusb-win32 devices", expand and verify "Nokia N900 (Update Mode)" can be found.
  • Now you are ready to run Flasher 3.5 with your parameters.
I got Nokia 900 (Storage Mode) , is it still going to work?

cdoebbler 2011-05-22 16:53
Re: How to reflash N900 in Windows 7 64bit
 
How do you "Run inf-wizard.exe (bin folder in zip) - Run as Administrator"i file is not found on my computer even after unpacking libusb-win32-bin-1.2.2.0.zip?

Quote:
Originally Posted by codetracer (Post 849980)
How to get N900 flasher to work in Windows 7 64-bit (x64).
  • Install Flasher 3.5 - http://tablets-dev.nokia.com/maemo-d...-downloads.php
  • Download libusb-win32-bin-1.2.2.0.zip - http://sourceforge.net/projects/libusb-win32/
  • Press U while starting N900 and attach USB
  • Wait for the original driver to install.
  • Run inf-wizard.exe (bin folder in zip) - Run as Administrator
    1. Press "Next"
    2. Search in list and select "0x0421 - 0x0105 - Nokia N900 (Update Mode)"
    3. Press "Next"
    4. Press "Next"
    5. Save .inf file
    6. Press "Install Now"
    7. Press "Install this driver software anyway" on warning message.
    8. You should get "Installation successful." and press OK.
  • Check Windows Device Manager for "libusb-win32 devices", expand and verify "Nokia N900 (Update Mode)" can be found.
  • Now you are ready to run Flasher 3.5 with your parameters.

kl2010 2011-05-29 00:41
Re: How to reflash N900 in Windows 7 64bit
 
Quote:
Originally Posted by rjneid (Post 985113)
codetracer 10-25-10 , 05:12 AM

How to get N900 flasher to work in Windows 7 64-bit (x64).
Install Flasher 3.5 - http://tablets-dev.nokia.com/maemo-d...-downloads.php
Download libusb-win32-bin-1.2.2.0.zip - http://sourceforge.net/projects/libusb-win32/
Press U while starting N900 and attach USB
Wait for the original driver to install.
Run inf-wizard.exe (bin folder in zip) - Run as Administrator
Press "Next"
Search in list and select "0x0421 - 0x0105 - Nokia N900 (Update Mode)"
Press "Next"
Press "Next"
Save .inf file
Press "Install Now"
Press "Install this driver software anyway" on warning message.
You should get "Installation successful." and press OK.
Check Windows Device Manager for "libusb-win32 devices", expand and verify "Nokia N900 (Update Mode)" can be found.
Now you are ready to run Flasher 3.5 with your parameters.



works like charm ...

confirmed working
i can confirm this works like a charm. for those still having problems of ...waiting.

1. first check to see where the flasher-3.5 is installed.
2. if it is in a folder like C:\Program Files (x86), then unistall it
3. reinstall it back on C:\Program Files. NOTICE THE FOLDER. BE SURE YOU CHANGE IT TO C:\Program Files during the reinstallation.
4 then follow the steps as outlined by earlier by codetracer.


should work like a charm. cheers.

GaRy delaMEr 2011-08-31 23:09
Re: How to reflash N900 in Windows 7 64bit
 
Hi all

I confirm too, work like a charm:

Run: cmd.exe and then,
Code:
Microsoft Windows [version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Tous droits réservés.

C:\Program Files\Maemo\flasher>flasher-3.5.exe -i
flasher v2.5.2 (Sep 24 2009)

Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2_PR_MR0

C:\Program Files\Maemo\flasher>
Windows 7 64 Ultimate Edition

zylor 2011-09-11 16:57
Re: How to reflash N900 in Windows 7 64bit
 
Quote:
Originally Posted by codetracer (Post 849980)
How to get N900 flasher to work in Windows 7 64-bit (x64).
  • Install Flasher 3.5 - http://tablets-dev.nokia.com/maemo-d...-downloads.php
  • Download libusb-win32-bin-1.2.2.0.zip - http://sourceforge.net/projects/libusb-win32/
  • Press U while starting N900 and attach USB
  • Wait for the original driver to install.
  • Run inf-wizard.exe (bin folder in zip) - Run as Administrator
    1. Press "Next"
    2. Search in list and select "0x0421 - 0x0105 - Nokia N900 (Update Mode)"
    3. Press "Next"
    4. Press "Next"
    5. Save .inf file
    6. Press "Install Now"
    7. Press "Install this driver software anyway" on warning message.
    8. You should get "Installation successful." and press OK.
  • Check Windows Device Manager for "libusb-win32 devices", expand and verify "Nokia N900 (Update Mode)" can be found.
  • Now you are ready to run Flasher 3.5 with your parameters.
Worked like a charm! :D


| Prev |   8     9   10   11     12   | Next | Last
All times are GMT. The time now is 19:46.
Page 10 of 16
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8