maemo.org - Talk
Page 12 of 39 « First 21011 12 131422 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   General (https://talk.maemo.org/forumdisplay.php?f=7)
-   -   N800 USB Host Mode Experiment (https://talk.maemo.org/showthread.php?t=4177)

kotzkind 2007-12-09 11:17
Re: N800 USB Host Mode Experiment
 
Quote:
Originally Posted by DeeJay_XB (Post 106121)
http://www.maxim-ic.com/appnotes.cfm...e_number/1822/ seems like on the host side the ID (pin4) needs to be connected to ground (pin5)
So we just have to do that(?):

-Take n800 usb cable
-Connect pin 4 and 5 on the part connected to the n8x0. (conductive lacquer?)
-buy female A to female A adapter

szucsati 2007-12-09 13:10
Re: N800 USB Host Mode Experiment
 
What if I buy a Mini USB - Mini USB OTG cable and an (active) USB HUB with a Mini USB connector? Will I be able to use the devices connected to the HUB? Or do I need a HUB that support OTG?

luca 2007-12-09 13:54
Re: N800 USB Host Mode Experiment
 
Quote:
Originally Posted by mutex (Post 106310)
Hi guys
Yesterday I got an usb wifi dongle working on my N800(OS2880), it's based on the RaLink rt73 chip and the driver has support for packet injection (muuhahahahaha).
Interesting, I have one of those, though I never managed to get packet injection working (didn't try really hard since I have an atheros based pc card that works fine).
Does the n800 supply enough juice for it or did you have to add external power?
Can you share the compiled module or is it included in the stock kernel (I'm not on os 2008 yet)?
edit: and does it mean that there's version of aircrack-ng workin on os2008?

mutex 2007-12-09 16:10
Re: N800 USB Host Mode Experiment
 
Quote:
Originally Posted by luca (Post 106360)
Interesting, I have one of those, though I never managed to get packet injection working (didn't try really hard since I have an atheros based pc card that works fine).
Does the n800 supply enough juice for it or did you have to add external power?
Can you share the compiled module or is it included in the stock kernel (I'm not on os 2008 yet)?
edit: and does it mean that there's version of aircrack-ng workin on os2008?
I had to run it trough the usb-hub in my monitor, I also installed fanoush kernel where otg-whitelist was disabled, don't know if that step was needed but the system stopped *****ing about "usb hub not supported".
You will need two files, the rt73.ko kernel module and rt73.bin firmware, pm me your e-mail and I'll send you the two files.
I have not tried packet injection, but my next step will be to compile
aireplay so that I can test it.
There's a package with aircrack-ng that runs on OS2008, but aireplay-ng is not included.

EDIT: you will also need the wireless-tools package

gemniii42 2007-12-09 16:27
Re: N800 USB Host Mode Experiment
 
Quote:
Originally Posted by LurkerN (Post 106109)
geminiii42:
The problem with either of those cables is that one would still need another adapter piece to connect to devices. However, if it works for data, the micro-to-mini adapter is the most ideal at this point. I've only seen them described in reference to charging, though.

Why do those Micro-A cables to full-size A-plug even exist in retail? Both ends are for host devices! They serve no purpose that a (soon to be commonplace) Micro-B cable does not fulfill.
Ok how about:
http://www.cellphone-store.com/motor...ata-cable.html

"Motorola SKN6238 USB to Micro-USB Data Cable. Motorola Data Cables allows the user to connect a wireless phone to a modem, enabling access to the internet, e-mail or fax*.

DeeJay_XB 2007-12-09 17:17
Re: N800 USB Host Mode Experiment
 
I can confirm that if you connect pin4 to pin5 on n800 side it switches automaticaly to usb host mode :) just tryied that and is Working!

kotzkind 2007-12-09 18:01
Re: N800 USB Host Mode Experiment
 
Quote:
Originally Posted by DeeJay_XB (Post 106415)
I can confirm that if you connect pin4 to pin5 on n800 side it switches automaticaly to usb host mode :) just tryied that and is Working!
How have you connected them? Pictures would be nice.

DeeJay_XB 2007-12-09 18:37
Re: N800 USB Host Mode Experiment
 
inside the nokia n800 usb connector are little holes, i used a small wire and put it to make contact inside 4th and 5th holes!after that i plugged nokia standard usb cable and at the other end a female to female usb adapter made from 2 front panel pc female connectors!after i put my usb drive in one female usb connector my n800 displayed the usb icon and opened filemanager and showed rhe files from usb stick!

dblank 2007-12-09 18:55
Re: N800 USB Host Mode Experiment
 
Quote:
Originally Posted by mutex (Post 106323)
Do you know the path where is should copy the kernel module to?
insmod will work no matter where the .ko is, just run:
insmod /path/to/file.ko

penguinbait 2007-12-09 20:17
Re: N800 USB Host Mode Experiment
 
CDROM DEB, it will autoload modules when installing and during boot.

http://www.internettablettalk.com/fo...476#post106476


All times are GMT. The time now is 23:40.
Page 12 of 39 « First 21011 12 131422 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8