Need a Flashing tutor..
Hi, never flashed my n900 before and kinda need a walkthrough. i've check out the wiki, got the flasher software and also the corresponding fremantle firmware.... can anyone walk me through... I'm a bit nervous about losing my n900 flashing virginity
|
Re: Need a Flashing tutor..
Really is as easy as following the wiki guide thats all i did - 10 mins max and then all you need to do is re-install apps.
If you have backed up before all your app settings will be saved on a restore from back up :) |
Re: Need a Flashing tutor..
lol, yeah but im not a command line kinda guy. ok, i get the part, about the phone ready for flashing mode, have gotten it hooked up, pressed run...and then i paused...
|
Re: Need a Flashing tutor..
step one: remove all clothes.
step two: put on old rain coat step three: go out in public and randomly open coat at unsuspecting passers by. sorry couldnt resist. but yeah it is really quite easy. you can use the software updater from the nokia website as one option. this has all the instructions you need with it. but if you do really want a walk through check out the wiki like noobmonkey suggests. hope i didnt offend by the way. |
Re: Need a Flashing tutor..
nah, pretty funny actually...
i actually got this far c:\Program Files\maemo\Flasher-3.5> im confused after this |
Re: Need a Flashing tutor..
1. Switch off the Maemo device
2. Press and hold down the 'u' key 3. Connect a USB cable between the Maemo device and host PC while holding down the 'u' key 4. When the USB cable is connected, it powers the Maemo device and sets it to flashing mode 5. When the USB icon appears in the upper right-hand corner, the Maemo device is in flashing mode 6. Release the 'u' key (holding the u key is on the N900, not pc!) If performed correctly, the USB image is visible in the upper right-hand corner of the screen. In your dos box type Code:
flasher-3.5 -F <Imagefile name, end in .bin / file you downloaded from the N900 firmware site> -f -RCode:
flasher-3.5.exe -F RX-51_2009SE_2.2009.51-1_PR_COMBINED_MR0_ARM.bin -f -RThe update will take approximately 4 minutes after which the N900 will reboot and display the Welcome Screen with Regional settings. Don't play with the device as you flash, as you may knock the cable out :( - wouldnt want that! once it is done it will auto-reboot. You will be welcomed by being asked to re-set up your device. Then you need to run the backup tool and re-import your settings etc...... |
Re: Need a Flashing tutor..
Quote:
|
Re: Need a Flashing tutor..
Quote:
good point well made ;) |
Re: Need a Flashing tutor..
ok i did that , pretty much copy and paste, except for my particular version of the n900 software
after i typed it in i got flasher v2.5.2 <sept 24 2009> RX-51_2009SE_1.2009.42-11.002_PR_COMBINED_002_ARM.bin: %m then nada |
Re: Need a Flashing tutor..
Quote:
should be flasher-3.5 |
Re: Need a Flashing tutor..
Quote:
Code:
flasher-3.5.exe -F RX-51_2009SE_1.2009.42-11.002_PR_COMBINED_002_ARM.bin -f -R |
Re: Need a Flashing tutor..
Quote:
|
Re: Need a Flashing tutor..
Quote:
|
Re: Need a Flashing tutor..
nope, ive downloaded flasher 3.5
and this is the software version RX-51_2009SE_1.2009.42-11.002_PR_COMBINED_002_ARM.bin usa version |
Re: Need a Flashing tutor..
yup and its in the same directory, verified with dir.
|
Re: Need a Flashing tutor..
Quote:
|
Re: Need a Flashing tutor..
no, i was just trying any us version at this point. would using the latest make a diff?
|
Re: Need a Flashing tutor..
would jujst be better. thats all.
in your command prompt, type dir *.* and let us know what appears. should let us know whats in that folder. |
Re: Need a Flashing tutor..
not sure what happend , but for some reason trying the latest firmware worked
|
Re: Need a Flashing tutor..
you guys are awesome... appreciate the community help... if you lived anywhere near me, i'd buy you guys all beers and lapdances.
|
Re: Need a Flashing tutor..
All beers and lapdances in the world?
|
| All times are GMT. The time now is 17:56. |
vBulletin® Version 3.8.8