maemo.org - Talk - LED Pattern Editor by Philipp Zabel

maemo.org - Talk (https://talk.maemo.org/index.php)

- Applications (https://talk.maemo.org/forumdisplay.php?f=41)

- - LED Pattern Editor by Philipp Zabel (https://talk.maemo.org/showthread.php?t=46054)

Re: LED Pattern Editor by Philipp Zabel

Quote:

Originally Posted by sgleo87 (Post 579226)

One thing I did notice is although I changed the LED colors and pattern when turning the device on with this app, it stayed exactly the same and is still the standard white LED pattern (changing the LED pattern for turning the device off worked fine though). Anyone else having this problem?

I didn't reboot until recently, and yes, changing the PowerOn pattern doesn't work here, either. I guess it is hard-coded in the bootloader somewhere...

Quote:

Originally Posted by BCMM (Post 649230)

Using two colour engines is nice, but is there a technical reason that three is not possible? With three, it would be possible to effectively create any pattern by using a red, green and blue line.

Hardware wise, it should be possible to set all three engines to drive the RGB LEDs, sacrificing the keyboard illumination as long as such a pattern would be running. Unfortunately, MCE reserves the third engine for the keyboard LEDs. It is closed source, so I don't see any way to change that.
On the N8x0, all three engines are available for the RGB LEDs.

Re: LED Pattern Editor by Philipp Zabel

Ah, that makes things a bit clearer. What about three cycles that do not all overlap (or, equivalently, two engines, but one can change the colour of an engine)? It wouldn't permit everything, but it would allow my example. This might be a stupid question, since I don't really know anything about MCE.

Re: LED Pattern Editor by Philipp Zabel

i try this python...

executed in terminal run like a charms...

Code:

#!/usr/bin/env python



### proof of concept for the N810 LED control (ld5521) by jott



import pygtk

import hildon

pygtk.require('2.0')

import gtk



class LEDColor:



    def set_color_callback(self, widget, data=None, value=None):

        self.set_color(self.sliders[0].get_level(), self.sliders[1].get_level(), self.sliders[2].get_level())



    def set_color(self,r,g,b):

        self.set_mode("direct")

        value = "%X:%X:%X" % (r,g,b)

        FILE = open("/sys/devices/platform/i2c_omap.2/i2c-0/0-0032/color","w")

        FILE.write(value)

        FILE.close()



    def set_mode(self,mode):

        FILE = open("/sys/devices/platform/i2c_omap.2/i2c-0/0-0032/mode","w")

        FILE.write(mode)

        FILE.close()



    def delete_event(self, widget, event, data=None):

        return False



    def destroy(self, widget, data=None):

        self.set_mode("run")

        gtk.main_quit()



    def __init__(self):

        self.set_color(0,0,0)



        window = gtk.Window(gtk.WINDOW_TOPLEVEL)

        window.connect("delete_event", self.delete_event)

        window.connect("destroy", self.destroy)

        window.set_border_width(10)



        content = gtk.VBox()

        self.sliders = []

        for i in range(0,3):

            slider = hildon.HVolumebar()

            adj = slider.get_adjustment()

            adj.set_all(0, 0, 255, 1, 10)

            content.pack_start(slider, True, True, 0)

            slider.set_property("has_mute",False)

            slider.show()

            self.sliders.append(slider)



        for i in range(0,3):

                self.sliders[i].connect("level_changed", self.set_color_callback, None)



        window.add(content)

        content.show()

        window.show()



    def main(self):

        gtk.main()



if __name__ == "__main__":

    led = LEDColor()

    led.main()

test it!

some more link

N810 LED Blinking

Previous post

http://www.google.com/notebook/publi...TgIgoQ3tW9iP0i

http://talk.maemo.org/showthread.php?t=27818

So like we see in the last link...its is very possible to make...but never be achieved...

If some one feel gratfull

Quote:

Originally Posted by pH5 (Post 650425)

...
On the N8x0, all three engines are available for the RGB LEDs.

i hope is see a LED Patterns Editor for N810 someday...

Re: LED Pattern Editor by Philipp Zabel

Does anyone know if this will be put in Testing anytime soon or did the author decide not to fix bugs and leave it for others to mess with??

Looks cool and fun but i try to do what i can to not touch devel things unless several people say its a good app that just hasnt gone through the process.

-MASTER

Re: LED Pattern Editor by Philipp Zabel

Quote:

Originally Posted by BCMM (Post 650488)

What about three cycles that do not all overlap (or, equivalently, two engines, but one can change the colour of an engine)? It wouldn't permit everything, but it would allow my example.

Unfortunately, it's not possible to do that in hardware. The engine patterns can't change the muxing. And it's not possible in software either, because we can't modify MCE to support this.

Quote:

Originally Posted by LABAUDIO (Post 651053)

i hope is see a LED Patterns Editor for N810 someday...

Quote:

Originally Posted by M A S T E R (Post 651103)

Does anyone know if this will be put in Testing anytime soon or did the author decide not to fix bugs and leave it for others to mess with??

Messing with welcome!

It's all just a matter of free time. I figured I should at least fix the bug tracker entry and finish the copy & paste implementation before submitting to the QA process, so here you are. New version 0.0.3-1, still N900 only, for now. I promoted this one to extras-testing.

Re: LED Pattern Editor by Philipp Zabel

can anyone temme if it is possible to get the blueish white light like when you switch on your phone for your im or messages? i tried rgb together but it isnt like the light that you see when you press and hold the power button for switching on the device. and how do i led colour for when your phone is on standby, like when you lock you phone.

-Thanks !:o

Re: LED Pattern Editor by Philipp Zabel

Quote:

Originally Posted by xperto (Post 654095)

There is a line where you blueish white color is :

Code:

PatternPowerOn=9;3;0;rgb;9d80400042ff02ffc000;9d800000

the digit in bold is the colors commands...

your im and chat line (and other notifications lines) is there :

Code:

PatternCommunicationIM=30;1;0;b;9d80400002ff03ff02ff03ff71080000;9d800000

PatternCommunicationSMS=30;1;0;b;9d80400002ff03ff02ff03ff71080000;9d800000

PatternCommunicationEmail=30;1;0;b;9d80400002ff03ff02ff03ff71080000;9d800000

PatternCommonNotification=30;1;0;b;9d80400002ff03ff02ff03ff71080000;9d800000

again the colors commands be bold....

so what you need its to replace the ''colors commands digits'' of your choice

for more reference see

Led Pattern ¤ N900 ¤ Wiki

cheers

Re: LED Pattern Editor by Philipp Zabel

Quote:

Originally Posted by BCMM (Post 649230)

Using two colour engines is nice, but is there a technical reason that three is not possible? With three, it would be possible to effectively create any pattern by using a red, green and blue line.

For example, it is, as far as I can see, impossible to cycled through a rainbow of colours, but it could be done with three engines.

It should be possible! if you manually change the pattern.ini you can make it look like a traffic light. So it should be possible! dont ask me how though...

Re: LED Pattern Editor by Philipp Zabel

Quote:

Originally Posted by dof250 (Post 654144)

It should be possible! if you manually change the pattern.ini you can make it look like a traffic light. So it should be possible! dont ask me how though...

http://wiki.maemo.org/LED_patterns

Lots of great community made patterns there.

Re: LED Pattern Editor by Philipp Zabel

Like you see in this

Default LED Patterns for Nokia N900

Code:

PatternError=0;5;0;r;9d8040007f007f0040ff7f007f000000;9d800000

PatternDeviceOn=254;0;0;rgb;9d804000422043207f100000;9d800000

PatternDeviceSoftOff=253;0;0;rg;9d804000423f433f7f100000;9d800000

PatternPowerOn=9;3;0;rgb;9d80400042ff02ffc000;9d800000

PatternPowerOff=10;3;0;rgb;9d80400001ff43ff7f007f00c000;9d800000

PatternCommunicationCall=30;1;0;b;9d80400002ff03ff02ff03ff71080000;9d800000

PatternCommunicationIM=30;1;0;b;9d80400002ff03ff02ff03ff71080000;9d800000

PatternCommunicationSMS=30;1;0;b;9d80400002ff03ff02ff03ff71080000;9d800000

PatternCommunicationEmail=30;1;0;b;9d80400002ff03ff02ff03ff71080000;9d800000

PatternCommonNotification=30;1;0;b;9d80400002ff03ff02ff03ff71080000;9d800000

PatternWebcamActive=20;1;0;r;9d80400004ffc0000000;9d800000

PatternBatteryCharging=50;4;0;rg;9d804000427f0d7f7f007f0042000000;9d800000

PatternBatteryFull=40;4;0;g;9d80407f0000;9d800000

i wanna point your attention in bold value up here

this value is a Priority

Quote:

0-255, 0 is highest, 255 is lowest.

Since currently only a single pattern at a time can be displayed, this is used to assign importance to the LED patterns. Although only a single LED pattern can be displayed at any time, multiple patterns may be active, the pattern with the highest priority being displayed.

A common example of this is where the n900 is on charge, the battery is full (starting PatternBatteryFull with a priority of 40), and an SMS message is received (PatternCommunicationSMS with a priority of 30). On receipt of the SMS, the LED begins to display the flashing blue led of an SMS. Once that SMS has been dismissed, the green LED of the full battery notification is again displayed.

in ligth of that

i wanna change some priority value but some change dont work

here we go :

Code:

PatternDeviceOn=254;0;0;rgb;9d804000422043207f100000;9d800000



PatternCommunicationIM=30;1;0;b;9d80400002ff03ff02ff03ff71080000;9d800000

So like you see in this, the deviceOn pattern be lowest priority then Im pattern...

so when i was in chat, contact or in im windows, and my tablet go sleep(cause no activitiy), the deviceOn pattern dont be trigged like supposed......cause IM priority look disable the deviceOn one...weird...

so cause i want my DeviceOn pattern be lighted in priority in front of ImPattern or mail pattern... i change the priority value of DeviceOn pattern for 29...(29 its one less the Notifications pattherns priority(30)

Code:

PatternDeviceOn=29;0;0;rgb;9d804000422043207f100000;9d800000

PatternCommunicationIM=30;1;0;b;9d80400002ff03ff02ff03ff71080000;9d800000

like this iam surely suppose to trigger DeviceOn in front of NotificationsPatterns...
but nothing work there too...

i have a n810 and is the same default priority then n900...

iam curious to see if someone test it this issue for future purpose..and solutions maybe

tx