![]() |
Re: n800: no memory card inserted
I also have a 4GB Transcend (150x)...
I bet I'll have to return my N800 back to NOKIA. :mad: |
Re: n800: no memory card inserted
Quote:
|
Re: n800: no memory card inserted
Quote:
Note that these cards are not recognized anymore by the external slot (on my N800): - Danelec RS-MMC 1GB (the one used on my previous n770) - Nokia MiniSD 128 Mo - Transcend SD 4GB You're saying that cards <128Mo now only work? Thanks, Max |
Re: n800: no memory card inserted
I finally managed to the the time to go buy a new card. I bought a Sandisk card. It works fine so far. More later, after some further testing ...
|
Re: n800: no memory card inserted
Quote:
How big is it? Which formating is it? FAT? FAT32? Max |
Re: n800: no memory card inserted
Its a Sandisk 4GB card. I also have now installed the SDHC kernel, and checked a 4GB Sandisk SDHC card which works as well.
I've decided that the Transcend cards don't work at all. Even the one that seemed to be working in the inside slot isn't working correctly. I had copied about 2GB of music on there. It was skipping and jumping about. The Sandisks have no such problems. As an aside ... I tried a Sandisk card on the Zaurus a couple of years ago. I formatted it with ext2 and it failed miserably to work. Worked fine with a FAT filesystem. |
Re: n800: no memory card inserted
I've got Transcend 4GB SDHC and Transcend 8GB SDHC cards working fine with the SDHC kernel (from Phil Langdales web site).
Where did you buy the Transcend card - eBay? These are the "COMMON counterfeit brands found flooding on eBay" (quoted from this page): Quote:
|
Re: n800: no memory card inserted
@w14 - try the serial number check on the Transcend UK site:
http://www.transcend-uk.com/Support/...=2&Func2No=126 Enter the serial number without the hyphen - the serial number for one of my 4GB SDHC modules is 156334-3673 and appears to be valid. |
Re: n800: no memory card inserted
Quote:
Can anyone of you put the content of your fstab here?? Thanks |
Re: n800: no memory card inserted
This is from a N800 with SDHC kernel.
The internal slot (/dev/mmcblk0) has an 8GB SDHC Transcend card. The external slot (/dev/mmcblk1) has a 4GB SD SanDisk card. The 8GB card has a 6.5GB vfat partition (only 128Mb swap in use so far) and a second 1GB ext2 partition (empty - just reformatted it and mounted manually). The 4GB card has a single vfat partition, full of audio/video files. Code:
/home/user # df |
| All times are GMT. The time now is 15:37. |
vBulletin® Version 3.8.8