maemo.org - Talk
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   General (https://talk.maemo.org/forumdisplay.php?f=7)
-   -   After flash, no more vibration (https://talk.maemo.org/showthread.php?t=51280)

thecrazyw 2010-04-29 18:32
Re: After flash, no more vibration
 
oh over the night ?

ok i will try it too

do you had the same problem that there was only a sound or was it vibrating a little bit ?

MohammadAG 2010-04-29 18:50
Re: After flash, no more vibration
 
Quote:
Originally Posted by thecrazyw (Post 633755)
oh over the night ?

ok i will try it too

do you had the same problem that there was only a sound or was it vibrating a little bit ?
Not vibration at all, I'll see if I can find the old vid of it.

thecrazyw 2010-04-30 22:38
Re: After flash, no more vibration
 
Yeah man !!!

BIG THX it's workin :-D

i didn't try over night only 5 minutes and then brrrr brrrr brrrr YEAH YEAH YEAH

Baaart 2010-06-24 17:29
Re: After flash, no more vibration
 
Used the script as well, after 5 minutes the phone went vibrating again! Thx

Cronqvist 2010-10-13 05:23
Re: After flash, no more vibration
 
Hello, I did all what you said, and nothing I let the function just for a half of hour but nothing just the same sound that it makes with the health check. I just buyed it 2 weeks ago on september 29. I haven't dropped it, actually I have been extremely careful with it.

well, I just want to know that if when you put the code, the vibration started immediatly or is it why you let it all the night over your desk.

Hope you can answer my question,

tecs 2011-10-21 21:01
Re: After flash, no more vibration
 
After today's CSSU update my vibration stopped working and instead the phone produced a high pitched noise. The above script helped unjam the motor inside my N900.

Useful tip: while the command was running I 'hit' the phone against my palm several times to help the process - after 10 seconds it started vibrating again. You should be careful while doing this to prevent damage to your phone and only hit it on the bottom (not back).

HangOver 2012-04-21 12:09
Re: After flash, no more vibration
 
I knocked mine 5 of times on the each side and it works again :D
Seems to be some hardware issue on mine.

sup 2012-11-30 11:56
Re: After flash, no more vibration
 
Yep, it still works, only I had to hit it like twenty times:-).

Vdrhtc 2013-03-11 07:04
Re: After flash, no more vibration
 
Yes, I've put mine in the pocket with the command issued and ran to the university - vibration problem got fixed. I suppose, that the command is not vital, maybe you just need to shock your device (however, the command is likely to increase the probability of unstucking dramatically)

vanemaster 2015-01-12 12:03
Re: After flash, no more vibration
 
Quote:
Originally Posted by MohammadAG (Post 631853)
I had that problem on day 2.
A month or two later I connected it to the charger and ran this in terminal (will activate the motor with the same pattern as an incoming call.
Code:
dbus-send --print-reply --system --dest=com.nokia.mce /com/nokia/mce/request  com.nokia.mce.request.req_vibrator_pattern_activate string:'PatternIncomingCall'
The next day it was working.
Keep in mind that it might not work for you, but it's worth a shot.

Edit: If that doesn't work I suggest taking it to a Nokia Care Center.
You just saved my life!!! My cellphone is alive again, thank you so much!


All times are GMT. The time now is 00:48.
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8