![]() |
Re: [Leaked PR1.2 RC] Info and Discussion thread
I think PR 1.2 is pretty cool guy. Eh disassembles firmware and doesn't afraid of Quim.
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
Its a perfect dump taken directly from an N900 obviously something to do with China, you lot just will no way have it that it actually WORKS !.
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
Wait a second, you are talking about me and my friends, if you do not stop this I will start crying and my friends don't like me crying. Quote:
Quote:
So you may brick it w/o being able to reflash or make use of another battery. You never know what the test was this build was for! Maybe it was to adjust regulator voltages and you will find yourself with a brick in your pocket in no time. We will see. If I had a spare device I would try but knowing to much about hardware and software causing hardware to blow I wont. |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
If you can disassemble to code that means other people can too, it also means they could add something nasty and roll it all back up and release it. |
Re: [Leaked PR1.2 RC] Info and Discussion thread
What is it with you lot and this Firmware got from a China website, you ALL are trying to tell everyone its got malware but what good would malware do on an N900 ? are your bank details stored on the office prog thats installed itself magically on this firmware, OR are you all simply JELOUS because none or all of you lot on the Meamo community are anywhere capable of writing firmware for the N900 that would even fix USSD.
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
And what could malware do? Well it could install a key logger and record you logging into sites. It could phone a premium rate number at 4am every morning for 10 minutes. It could be a spam bot. There are a number of things it could do. And it's perfectly reasonable that people be cautious. |
Re: [Opinion Leaked PR1.2] Are we really to blame?
Quote:
whoever said that they would sue nokia if their own useage of a pirated/leaked firmware bricked their n900 is an idiot. Thats like you stealing a pack of condoms and then suing Trojan because the stolen condoms broke and you got HIV..... |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
SO WHAT its 4 weeks old so what it has some flaws but i can honestly say my N900 has never performed better since the day it arrived. |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
The firmware is ready available for ANYONE to download from a google search now so why the heck is the links being deleted from this forum every time someone puts them up?
Even more evidence to prove everything i have said about you lot !. |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
Okay, thread has devolved into abill_uk vs The World, and that's a sad spectacle. I don't recall subscribing to that channel.
Chemist, can you either revise the thread title or put this thing on Pause? |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
Just ask isohunt for any US (and I think UK?) users. Providing and aiding people in sharing and distributing illegal copyrighted materials has consequences. Personally.. I like being able to access T.M.O... I dunno about anyone else though. |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
There are links to DL roms on the interweb but nobody posts them here. I mean, you are an engineer, you really can't be this ******ed (yes, I have reduced myself to poop slinging) |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
I find it interesting that you keep mentioning that we're somehow jealous this firmware is better than anything we've written. It's quite bizarre thought process you've gone through to get there. Are you suggesting that when PR1.2 is released we'll all sulk and burn our N900s because Nokia have done something better than we could ever do? I'm pretty sure I've yet to see someone on this forum say not to use this firmware as it WILL brick your N900. I've mostly seen people warning that you don't know where it's come from, where it's been on the way, and that you may end up regretting it in the end. Which is fair enough. However you seem to be on a crusade to get as many people to install it as possible. Coupled with your repeated claims about what an awesome engineer you are, that it's perfectly safe because you've seen the source code, that it's no different to a dump from another N900 and references to a chinese website (placing physical distance) I do now wonder if the person behind the release of the firmware is actually you. It does sound pretty far fetched but when you put all of your posts together it does look quite suspicious. |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
Guys... a few facts....
1. The PR1.2 RC-leaked, ( so far) is better than any other N900 firmware I've used.... PERIOD! 2. It's source is unknown (it obviously started out from Nokia but it's path to those Chinese servers is not known ) and may therefore contain malware etc. Simply means those using it need to bear that in mind and be cautious. .....regularly check to see what it's up to etc. Just be aware of the risks. |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
I dont care who wants it or not but you lot going on like this please remember the whole world is going to read this and realise just what a farce Meamo.org really IS after tonight charade, just look at how many moderators currently on this thread right now and the wife of one of them probably and between the LOT of you i reckon Nokia will have to pay you a weeks salary for your work today. So what is coming next? a lawsuit because some of us even like this firmware upgrade? Right ok this is my last on this subject so if you mods wipe the lot or close this thread i dont care nor do i care who uses this FW. Not very good for Nokia any of this at the end of the day so please... be my guest carry it on till eternity. |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
I consider my self quite adept at deciphering forum rant postings, but you my friend have taken it to a whole new level. I salute you you. King of The gibberers |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
Quote:
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
I have just been informed the REAL update from Nokia is out within 36 hours from now and to install a new version of NSU before your able to update. GOODNIGHT.
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
This thread should be LOCKED...
Too much fearmongering and too much proflashyourdevicewhatdoicare... Both SIDES OUT OF LINE!!! :cool: Be cool... Everyone´s got a choice and its theirs. Flash your device if you like experimenting and don´t if you don´t. PERIOD |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
otherwise I might have been excited. As it is.. I'll just be thoroughly surprised. |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
muhahahaha.... certain people do make this fun reading.... i dont need any other website at the moment! |
Re: [Leaked PR1.2 RC] Info and Discussion thread
http://cdn.solidfiles.net/i/JWWU.png
Guys, stop feeding the troll. Quote:
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
battery performance is much better
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
Just in case someone needs this:
HOWTO ignore someone on talk.maemo.org: 1. click their Username 2. click "View Public Profile" 3. click "User lists" 4. click "Add to Ignore list" 5. click "yes" to confirm easy, isn't it? |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Did abill_uk go to troll university to get his "engineer" degree... because calling himself, an engineer, kindda insults the rest of us, who actually have engineering degrees...
http://en.wikipedia.org/wiki/Engineer read the first part at least and tell me if u even qualify to be called an engineer... cause i only see a fool(abill_uk) |
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
one of the screen is really buggy.
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
Quote:
|
Re: [Leaked PR1.2 RC] Info and Discussion thread
This is interesting.......
HongKong PR1.2 Screenshots Take note of the version number 10.2010.12-9 .... exactly what has been making the rounds :) |
| All times are GMT. The time now is 17:46. |
vBulletin® Version 3.8.8