N900 - After Firmware Flash - No Signal / Operator Found
 

N900 - After Firmware Flash - No Signal / Operator Found

Flashed latest Global release.
Boots fine - but no connections available other than wifi, do i need to flash the UK version of the firmware?

Tmobile
N900
UK

Thanks,

Re: N900 - After Firmware Flash - No Signal / Operator Found
 

Flashed the uk firmware latest - same issue.

I did have PR1.2 before the flash if this means anything.

Re: N900 - After Firmware Flash - No Signal / Operator Found
 

Well still no look so far, anyone else know a fix ?

Re: N900 - After Firmware Flash - No Signal / Operator Found
 

Yes, Can you tye out the EXACT file name of the one you just flashed. I suspect it is not PR1.2

Re: N900 - After Firmware Flash - No Signal / Operator Found
 

RX-51_2009SE_1.2009.42-11.203.2_PR_COMBINED_203_ARM.bin 161656233 OS 2009 version 1.2009.42-11 Maemo 5 UK variant for Nokia N900

Re: N900 - After Firmware Flash - No Signal / Operator Found
 

yep that is PR1.0 not 1.2. Did the same myslef :D

You want...hold a mo

Re: N900 - After Firmware Flash - No Signal / Operator Found
 

Further down screen there is this one in the Firmware List:

RX-51_2009SE_10.2010.19-1.203.1_PR_COMBINED_203_ARM.bin 187852801 PR 1.2 version 10.2010.19-1

Re: N900 - After Firmware Flash - No Signal / Operator Found
 

RX-51_2009SE_10.2010.19-1.203.1_PR_COMBINED_203_ARM.bin

from here:- http://tablets-dev.nokia.com/nokia_N900.php

John

Re: N900 - After Firmware Flash - No Signal / Operator Found
 

Yes the confusion with me was that I assumed (silly me) that the latest verssion would be at the top, then was lured by the 1.2 in the firmarew name. However this si not the version but the date code IIRC. You will notice that there is no 2010 in the date for the old one too.

I simply re-flashed an all was fine :D Good luck

Re: N900 - After Firmware Flash - No Signal / Operator Found
 

ahh i see i see.... well thank you for your reply much appreciated.
Download won't be done for a little bit but i'll update you when it's complete and i've reflashed.

Thanks Again,

Re: N900 - After Firmware Flash - No Signal / Operator Found
 

Just to report back the issue after the correct FW re-flash PR1.2 has now been solved.

Thanks,

Marc