![]() |
Re: Your N900 Maximum Overclock
Quote:
|
Re: Your N900 Maximum Overclock
used jakiman's overclock and loaded LV and changed the limits to 250/900. this is my default now and stable 24/7 :D
|
Re: Your N900 Maximum Overclock
Quote:
http://focus.ti.com/pdfs/wtbu/smartr...whitepaper.pdf |
Re: Your N900 Maximum Overclock
I live in Egypt which is a hot country, man summer here gets 44C easily. Do you think this could kill my n900 on overclock?
|
Re: Your N900 Maximum Overclock
in ideal, though you overclock, you use a lower voltage than the default one, so ideal profile is still pretty much safe for you mate, you can make sure by monitoring the battery temperature, after installing rootsh and the enhanced kernel, type this:
sudo gainroot modprobe bq27x00_battery cat /sys/class/power_supply/bq27200-0/temp xterm will print the temp for you to check, i think under 45 is safe, mine never went over 40 though. |
Re: Your N900 Maximum Overclock
I don't use my N900 for phone calls. I never have so I have been using an early version of 125 - 800 since it first was available as a fiasco that I could load from the phone... Never had a problem and with no phone it never screwed back down to 600.
I have tried the Kernel Power app but the "Ideal" kernel that it recommends has always caused a crash at boot up. If that was the easiest and/or safest and it crashed I figured I didn't need the app and went back to my old 800 MHz fiasco. :) The WiKi is long on technical specs but short on reasoning and I really don't have the inclination and time to find out "what's best for me" since it would all be subjective. I was hoping that someone by now would say this is what is best for the average user and these are the reasons why. That way if I get spontaneous reboots I have something to work against and when I did find out what worked best I might have a better understanding of why. Right now I would be using Titan's "Ideal" If it didn't cause my N900 to spontaneously reboot. I would tweak it if I knew which way to go and why. |
Re: Your N900 Maximum Overclock
Quote:
>root >kernel-config load /usr/share/kernel-power-settings/default >kernel-config limits 250 1000 |
Re: Your N900 Maximum Overclock
Quote:
It sounds like you don't understand the basic theory of overclocking, correct me if I'm wrong. CPUs are not identical, so you can't count on a description of what is best for the typical user. Most people seem to be able to run Ideal, but lots of people can't. Since you spontaneously reboot with Ideal, Ideal isn't best for you. Since you don't have time for extensive testing (and most of us don't have time to tweak ad infinitum -- I know I don't), you should try one of the other major settings. The reason you are seeing more specifications than reasoning in the docs is that overclocking is not based mainly on reasoning; it's mainly based on experimentation. I would suggest that you try a speed of 800 mHz and a voltage setting of XLV. If that doesn't work for you (if you continue to spontaneouly reboot), try a voltage setting of ULV. If you continue to spontaneously reboot, try a voltage setting of LV. If you spontaneously reboot with any overclocking setting, you are one of the rare possessors of a CPU that shouldn't be overclocked. |
Re: Your N900 Maximum Overclock
ideal profile doesn't work with my N900 well. it gives constant reboots and crashes.
LV works with me well and sets my limits to 250/900. Has anyone here loaded LV profile and defaulted to 250/1150?:D |
Re: Your N900 Maximum Overclock
Quote:
how much do you use your phone? what do you use it for? and how long does the battery last? |
| All times are GMT. The time now is 13:16. |
vBulletin® Version 3.8.8