maemo.org - Talk - [Android] NITDroid V2 Help/Tutorial Topic

maemo.org - Talk (https://talk.maemo.org/index.php)

- Alternatives (https://talk.maemo.org/forumdisplay.php?f=36)

- - [Android] NITDroid V2 Help/Tutorial Topic - Updated (https://talk.maemo.org/showthread.php?t=56524)

Re: [Android] NITDroid V2 Help/Tutorial Topic

Quote:

Originally Posted by kwek (Post 743543)

Ive seen this error before but not yet a clear solution.. I have tried first the autoinstaller at first on a SD card of 8GB.. The autoinstaller already did the bootmenu and I've flashed the kernel manually. That didn't boot android so i formatted again manually: Ive made 1 partition 128MB, formatted to vfat and another partition (about 8GB) and formatted ext3. Ive extracted the rootfs to the big second ext3 partition using bunzip2/tar in maemo.

When booting the bootmenu comes up fine and i can select android.. but then:

Code:

getbootstate: Mounting mmcblk0p2

 on /mnt/new_root failed: No such device

Command exited with non-zero status 255

real  xx

user xx

sys xx

Choose bootup option:

 2) MMC

 9) Start a shell

Any idea what this could be? Could it be the SD card that it cant read somehow? Did i do something wrong with the rootfs / kernel?

Ok well ignore this because i tried re-installing again this using the last update of dj_steve from
http://talk.maemo.org/showpost.php?p...postcount=2142

This time it booted.. Great work!

Re: [Android] NITDroid V2 Help/Tutorial Topic

Quote:

Originally Posted by Dousan (Post 743687)

installed the new froyo build using steves new guide. All went well but i can't boot into nitdroid. When i choose the number (1) that should boot nitdroid it just boots into the bootmenu again. Anybody know how to fix this?

An Other thing, the number (0) that should boot into maemo just shuts it down... Is it supposed to do that? Further more it takes a few tries to boot into maemo?

I had this when i had the old bootmenu installed and extracted steve's over it.. then there are double boot entries. trashing /etc/bootmenu and unpacking the new bootmenu to / worked for me.

Re: [Android] NITDroid V2 Help/Tutorial Topic

Quote:

Originally Posted by Darko (Post 743709)

Same was to me, but option 4 boots android for me...

Thanks for the answer :)

I'd figured it out before you wrote... I just tried one boot option after another (didn't have an answer anyway so why not try something while waiting) and bam number 4 did the trick ;)

Re: [Android] NITDroid V2 Help/Tutorial Topic

Guys I need help with this guide:

Quote:

Originally Posted by dj_steve (Post 743038)

new rootfs linked now which has working wifi, thanks to hstende for helping test and fix this :)

::UPDATE TIME:: :)
This will be added to first post tomorrow also

New RootFS: http://downloads.nitdroid.com/NITDro...-Fixed.tar.bz2 | http://files2.nitdroid.com/NITDroid-...-Fixed.tar.bz2
Kernel Required: 2.6.28.NIT.02(http://downloads.nitdroid.com/Jay-c/....NIT.02.tar.gz | http://files2.nitdroid.com/zImage-2.6.28.NIT.02.tar.gz)
Kernel Modules Required For Maemo: 2.6.28.NIT.02(http://downloads.nitdroid.com/Jay-c/....NIT.02.tar.gz | http://files2.nitdroid.com/modules-2.6.28.NIT.02.tar.gz)
Recommended Additional Items: Beta3 Bootmenu but Jay-C: http://downloads.nitdroid.com/Jay-c/...2.beta3.tar.gz | http://files2.nitdroid.com/bootmenu2.beta3.tar.gz

Their is a small howto below for getting this running as it is not as simple as previous roots due to Google APPs

--CHANGELOG--
Froyo(2.2) Based
Battery Reporting Broken Currently
FULL GOOGLE APPS INCLUDING MARKET THAT CAN DOWNLOAD/INSTALL THINGS
Calibrated Touchscreen driver (Thanks again Jay-C)
Flash Player IS NOT included by default but should be downloadable from http://www.adobe.com/go/getfp10android after activating device with google account (to enable market access)

All in all this is VERY stable, google apps give no reduction in speed nor do they crash (except once at first boot- see below)

ok now for the howto:

All these steps should be performed on N900
Start off with a open xterm window at root shell or an open ssh connection(ssh is easier to typ in)

1. Install new bootmenu if you chose to use it (highly recommended)

Code:

cd /

wget http://downloads.nitdroid.com/Jay-c/bootmenu2.beta3.tar.gz

tar xzvf bootmenu2.beta3.tar.gz

rm bootmenu2.beta3.tar.gz

2. Download And Install new Kernel Modules

Code:

cd /lib/modules

wget http://downloads.nitdroid.com/Jay-c/modules-2.6.28.NIT.02.tar.gz

tar xzvf modules-2.6.28.NIT.02.tar.gz

rm modules-2.6.28.NIT.02.tar.gz 

rm current

ln -fs 2.6.28.NIT.02 current

depmod -a 2.6.28.NIT.02

3. Mount your android partition and install rootfs (this will wipe out previous data so backup anything you want)

Code:

cd /

mkdir and

mount -o noatime,rw /dev/mmcblk1p2 /and

cd /home/user/MyDocs

wget http://downloads.nitdroid.com/NITDroid-N900-0.0.5-1FroYo-GAPPS-Fixed.tar.bz2

bzip2 -d NITDroid-N900-0.0.5-1FroYo-GAPPS-Fixed.tar.bz2

cd /and

tar xvf /home/user/MyDocs/NITDroid-N900-0.0.5-1FroYo-GAPPS-Fixed.tar

cd ..

umount /and

rmdir /and

4. flash new kernel:

Code:

cd /home/user/MyDocs

wget http://downloads.nitdroid.com/Jay-c/zImage-2.6.28.NIT.02.tar.gz

tar xzvf zImage-2.6.28.NIT.02.tar.gz

rm System.map-2.6.28.NIT.02

** open up a second xterm window as root and run this **

Code:

softupd -vv -s --local

** switch back to other xterm and continue **

Code:

flasher --local -f -k /home/user/MyDocs/zImage-2.6.28.NIT.02

close both xterm windows once flash completes.

thats the install done. now reboot into your new os :)

few things to mention about this build:

1. On first boot you will get a prompt of what to use to do something, pick setupwizard
2. it will take a short while for device to load far enough to select the item above so be patient
3. once into setup wizard click skip > skip and next all the way. then when it loads up the add account wizard skip that also.
4. SetupWizard will now crash, click close and the android desktop will return.
5. Go setup your wifi (will very likely require a reboot to work)
6. once wifi is up go into market app and wait, the add accoutn wizard will appear and you can now continue through and setup your google account. once it is setup wait and the market will load after a short time

hopefully this is nice and clear and simple :)

sorry for mega post again

I'm having I problem with the command softupd -vv -s --local

Image:

http://i785.photobucket.com/albums/y...ista/error.png

Same problem while using Ubuntu

Re: [Android] NITDroid V2 Help/Tutorial Topic

Quote:

Originally Posted by dj_steve

All these steps should be performed on N900

That could be it.

Re: [Android] NITDroid V2 Help/Tutorial Topic

Quote:

Originally Posted by Forphucsake (Post 744825)

That could be it.

Lol,, didn't see this
Thanks

Re: [Android] NITDroid V2 Help/Tutorial Topic

I'm getting permission denied errors while booting. Tried chmod 777 system/apps/* but it didn't work, even though ls -l shows it should. I used gparted instead of fdisk, could that be the reason?

Re: [Android] NITDroid V2 Help/Tutorial Topic

If i want to unninstall nitroid i have to format the microsd card...is that all ? After that no files from nitroid/bootmenu remain in my phone memory ? During the nitoid setup some file is flashed to my phone...is that removed to ?

Re: [Android] NITDroid V2 Help/Tutorial Topic

Quote:

Originally Posted by vitamina (Post 745188)

The items flashed to your N900 are not removed when you format the microsd. But you probably won't notice them.

Re: [Android] NITDroid V2 Help/Tutorial Topic

i have one error on command "bzip2 -d NITDroid-N900-0.0.5-1FroYo-GAPPS-Fixed.tar.bz2"

terminal on n900 show me bzip2 not found
why?

sorry for my bad english....