maemo.org - Talk
Page 1 of 6 1 23 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N900 (https://talk.maemo.org/forumdisplay.php?f=44)
-   -   16GB miniSD issue!!! HELP! (https://talk.maemo.org/showthread.php?t=57048)

HeavyComponent 2010-06-24 23:01
16GB miniSD issue!!! HELP!
 
Ok guys, I've looked everywhere for a solution for this and I can't find ONE SOLID solution that will tell me step by step how to fix this. Some solutions tell you steps, but in the middle they assume you know how to get this or do this and I'm clueless! :(

For some reason IN my N900 my 16GB miniSD card isn't working the way it should. Everytime I try to add something ERROR, CORRUPTED anything in that matter. Formatting it in the N900 doesn't work! Formatting it via PC while in the N900 doesn't work! I also formatted it in the adapter and a different phone (EVO) then put it back in my N900, doesn't work! When I put it in an adapter so the PC could read it or another phone to read it, it works GREAT! It's just that when it comes to my phone to use it it's a no go.

Anyone have a SOLID solution? I'm new to Nokia, but I'm def. getting the hang. I'm coming from a Windows phone (HD2) and I know about flashing and stuff. Just that the flashing for this phone is more difficult. I tried reading, but I can't seem to understand it yet. Flashing for Windows phone is much easier!

Thanks in advance! Somebody sent me to this site so I hope I get great results. :D

BTW: I have Version 10.2010.19-1.002

wmarone 2010-06-24 23:21
Re: 16GB miniSD issue!!! HELP!
 
The initial questions I have are:
- Where did you get the SD card
- Where was the seller based
- Have you tried to write data to it beyond formatting from either the EVO or the PC?

HeavyComponent 2010-06-24 23:42
Re: 16GB miniSD issue!!! HELP!
 
- The SD card came from my brand NEW never been used HD2.
- Phone came directly from T-Mobile
- With the adapter or EVO no, but when it was on my N900 I tried and it kept telling me to insert it because it wouldn't open folders, create folders or add any files.

The thing is a few times I added files via N900/USB and I thought it was working then out the blue I would get errors. Happens everytime so I don't even try to add any files anymore.

I will try adding data to the card while on the EVO and adapter to see what happens. I already have a great feeling it will work fine, but when I add it to my phone to access those files. It will not work!

Thanks for the reply!

HeavyComponent 2010-06-25 22:23
Re: 16GB miniSD issue!!! HELP!
 
Quote:
Originally Posted by wmarone (Post 728266)
- Have you tried to write data to it beyond formatting from either the EVO or the PC?
Ok the card seems to be working fine when it comes to adding data via Evo and adapter.

Any suggestions?

There was a thread that I found off google that the person rereflashed with EMMC or whatever it is. I went through the wiki and I don't understand the instructions because it's not a simple step by step. I'm use to flashing because I'm coming from a windows mobile phone (HD2). Pretty easy flashing custom ROMs for WM based phones.

HeavyComponent 2010-06-26 15:51
Re: 16GB miniSD issue!!! HELP!
 
I can't be the only one with this issue!

choubbi 2010-06-27 13:29
Re: 16GB miniSD issue!!! HELP!
 
Maybe a defective connector or something like that... I'd send it back to Nokia if this happened to me.

crail 2010-06-27 13:37
Re: 16GB miniSD issue!!! HELP!
 
try scan and fix option with pc, and tick bad sectors box. if youre using windows. if that dont fix it then its a gonna

HeavyComponent 2010-06-27 13:40
Re: 16GB miniSD issue!!! HELP!
 
Quote:
Originally Posted by choubbi (Post 731329)
Maybe a defective connector or something like that... I'd send it back to Nokia if this happened to me.
I have a feeling it has nothing to do with a bad device. Like I said I read somewhere how somebody did a reflash of EMMC or MMC and got it to work. Where I found it I didn't get basic instructions on how to do it so I left it alone.

I will try and look for it.

HeavyComponent 2010-06-27 14:03
Re: 16GB miniSD issue!!! HELP!
 
I've read somewhere to do the command "dmesg" in X Terminal to look for errors. I don't know what I'm looking for so can someone look through the list. I will most a list with the SD card inserted and when it's not.

With the SD card inserted...

Code:
[95963.578399] slide (GPIO 71) is now open
[95975.125457] slide (GPIO 71) is now closed
[95985.500610] slide (GPIO 71) is now open
[96003.679992] slide (GPIO 71) is now closed
[96021.883148] slide (GPIO 71) is now open
[96190.891113] slide (GPIO 71) is now closed
[96237.820709] slide (GPIO 71) is now open
[96261.023773] slide (GPIO 71) is now closed
[96271.569580] gprs0: detached
[96275.703765] gprs0: attached
[96281.297210] slide (GPIO 71) is now open
[96295.500457] slide (GPIO 71) is now closed
[96313.750457] slide (GPIO 71) is now open
[96376.000610] slide (GPIO 71) is now closed
[96417.203704] slide (GPIO 71) is now open
[96515.000610] slide (GPIO 71) is now closed
[96558.125427] slide (GPIO 71) is now open
[96689.719238] slide (GPIO 71) is now closed
[96722.185333] gprs0: detached
[96726.313629] gprs0: attached
[96756.867614] cam_focus (GPIO 68) is now active
[96756.930053] cam_focus (GPIO 68) is now inactive
[96759.656646] kb_lock (GPIO 113) is now closed
[96759.859710] kb_lock (GPIO 113) is now open
[96782.727233] kb_lock (GPIO 113) is now closed
[96782.906707] kb_lock (GPIO 113) is now open
[96786.891296] slide (GPIO 71) is now open
[96802.711425] slide (GPIO 71) is now closed
[96804.133209] kb_lock (GPIO 113) is now closed
[96804.305114] kb_lock (GPIO 113) is now open
[96815.469268] kb_lock (GPIO 113) is now closed
[96815.625518] kb_lock (GPIO 113) is now open
[96819.484741] slide (GPIO 71) is now open
[96880.673187] gprs0: detached
[96884.821105] gprs0: attached
[96888.101959] slide (GPIO 71) is now closed
[96935.375488] slide (GPIO 71) is now open
[96973.412872] gprs0: detached
[96977.538543] gprs0: attached
[97002.680023] slide (GPIO 71) is now closed
[97008.516174] kb_lock (GPIO 113) is now closed
[97008.664428] kb_lock (GPIO 113) is now open
[97013.485046] kb_lock (GPIO 113) is now closed
[97013.625488] kb_lock (GPIO 113) is now open
[97024.000488] slide (GPIO 71) is now open
[97037.687988] slide (GPIO 71) is now closed
[97039.805175] slide (GPIO 71) is now open
[97058.953552] slide (GPIO 71) is now closed
[97137.359832] slide (GPIO 71) is now open
[97152.500335] slide (GPIO 71) is now closed
[97181.016082] slide (GPIO 71) is now open
[97196.023956] slide (GPIO 71) is now closed
[97281.914550] slide (GPIO 71) is now open
[97314.133148] slide (GPIO 71) is now closed
[97357.484863] slide (GPIO 71) is now open
[97392.687835] slide (GPIO 71) is now closed
[97550.399047] slide (GPIO 71) is now open
[97561.585815] slide (GPIO 71) is now closed
[97566.813140] slide (GPIO 71) is now open
[97567.664642] slide (GPIO 71) is now closed
[97686.235046] slide (GPIO 71) is now open
[97691.305175] slide (GPIO 71) is now closed
[97692.141113] kb_lock (GPIO 113) is now closed
[97692.359771] kb_lock (GPIO 113) is now open
[97846.687866] kb_lock (GPIO 113) is now closed
[97846.859680] kb_lock (GPIO 113) is now open
[97848.289581] kb_lock (GPIO 113) is now closed
[97848.445709] kb_lock (GPIO 113) is now open
[97881.070831] kb_lock (GPIO 113) is now closed
[97881.250488] kb_lock (GPIO 113) is now open
[97940.281616] kb_lock (GPIO 113) is now closed
[97940.508239] kb_lock (GPIO 113) is now open
[99182.988983] gprs0: detached
[99187.139556] gprs0: attached
[100738.133270] slide (GPIO 71) is now open
[100740.851898] slide (GPIO 71) is now closed
[100819.750457] cam_focus (GPIO 68) is now active
[100819.859832] cam_focus (GPIO 68) is now inactive
[100819.961395] cam_focus (GPIO 68) is now active
[100819.992675] cam_focus (GPIO 68) is now inactive
[100820.773895] cam_focus (GPIO 68) is now active
[100820.844238] cam_focus (GPIO 68) is now inactive
[100821.195831] cam_focus (GPIO 68) is now active
[100821.383270] cam_focus (GPIO 68) is now inactive
[100907.944396] regulator_disable: not in use by this consumer
[100907.944458] regulator_disable: not in use by this consumer
[100929.102020] cam_focus (GPIO 68) is now active
[100929.633361] cam_focus (GPIO 68) is now inactive
[100945.461303] slide (GPIO 71) is now open
[100951.617736] slide (GPIO 71) is now closed
[101101.180206] cam_focus (GPIO 68) is now active
[101101.242645] cam_focus (GPIO 68) is now inactive
[101104.680145] kb_lock (GPIO 113) is now closed
[101104.922790] kb_lock (GPIO 113) is now open
[101300.289337] proximity (GPIO 89) is now open
[101307.039520] proximity (GPIO 89) is now closed
[101313.555145] proximity (GPIO 89) is now open
[101314.508361] proximity (GPIO 89) is now closed
[101315.938140] proximity (GPIO 89) is now open
[101318.719238] proximity (GPIO 89) is now closed
[101318.798431] proximity (GPIO 89) is now open
[101320.383605] proximity (GPIO 89) is now closed
[101320.628356] proximity (GPIO 89) is now open
[101322.133636] proximity (GPIO 89) is now closed
[101323.961334] proximity (GPIO 89) is now open
[101325.328460] slide (GPIO 71) is now open
[101330.407592] kb_lock (GPIO 113) is now closed
[101330.578552] kb_lock (GPIO 113) is now open
[101391.281646] slide (GPIO 71) is now closed
[101394.523895] kb_lock (GPIO 113) is now closed
[101394.773803] kb_lock (GPIO 113) is now open
[101400.586456] slide (GPIO 71) is now open
[101425.555145] slide (GPIO 71) is now closed
[101426.367614] kb_lock (GPIO 113) is now closed
[101426.633178] kb_lock (GPIO 113) is now open
[101558.773956] slide (GPIO 71) is now open
[101666.117645] slide (GPIO 71) is now closed
[101667.281799] kb_lock (GPIO 113) is now closed
[101667.539398] kb_lock (GPIO 113) is now open
[101750.312927] kb_lock (GPIO 113) is now closed
[101750.531616] kb_lock (GPIO 113) is now open
[101756.890991] slide (GPIO 71) is now open
[101771.461273] slide (GPIO 71) is now closed
[101772.695709] kb_lock (GPIO 113) is now closed
[101772.828521] kb_lock (GPIO 113) is now open
[102234.609680] slide (GPIO 71) is now open
[102270.750335] slide (GPIO 71) is now closed
[102295.656646] slide (GPIO 71) is now open
[102321.188659] slide (GPIO 71) is now closed
[102380.625396] proximity (GPIO 89) is now closed
[102393.656707] proximity (GPIO 89) is now open
[102456.655792] slide (GPIO 71) is now open
[102552.617645] slide (GPIO 71) is now closed
[102554.656707] kb_lock (GPIO 113) is now closed
[102554.836303] kb_lock (GPIO 113) is now open
[103181.656707] slide (GPIO 71) is now open
[103224.078521] slide (GPIO 71) is now closed
[103225.398864] kb_lock (GPIO 113) is now closed
[103225.594116] kb_lock (GPIO 113) is now open
[103260.938049] slide (GPIO 71) is now open
[103278.672210] slide (GPIO 71) is now closed
[103280.133270] kb_lock (GPIO 113) is now closed
[103280.375396] kb_lock (GPIO 113) is now open
[103319.203582] slide (GPIO 71) is now open
[103337.281768] slide (GPIO 71) is now closed
[103339.742584] kb_lock (GPIO 113) is now closed
[103339.976867] kb_lock (GPIO 113) is now open
[103362.664489] slide (GPIO 71) is now open
[103443.369964] omapfb omapfb: Unknown ioctl 0x80047210
[103443.371276] omapfb omapfb: Unknown ioctl 0x80047210
[103443.372558] omapfb omapfb: Unknown ioctl 0x80047210
[103444.303802] omap-previewer omap-previewer: previewer_ioctl: Invalid Command Value
[103498.094207] slide (GPIO 71) is now closed
[103499.648864] kb_lock (GPIO 113) is now closed
[103499.836334] kb_lock (GPIO 113) is now open
[103627.851959] slide (GPIO 71) is now open
[103643.759277] slide (GPIO 71) is now closed
[103656.289520] kb_lock (GPIO 113) is now closed
[103656.555145] kb_lock (GPIO 113) is now open
[103735.781646] kb_lock (GPIO 113) is now closed
[103735.945556] kb_lock (GPIO 113) is now open
[103738.469085] slide (GPIO 71) is now open
[103751.531707] slide (GPIO 71) is now closed
[103764.617645] slide (GPIO 71) is now open
[103774.867553] slide (GPIO 71) is now closed
[103775.578582] kb_lock (GPIO 113) is now closed
[103775.820678] kb_lock (GPIO 113) is now open
[104745.328582] slide (GPIO 71) is now open
[104813.258239] slide (GPIO 71) is now closed
[104813.922454] kb_lock (GPIO 113) is now closed
[104814.179992] kb_lock (GPIO 113) is now open
[106272.609832] slide (GPIO 71) is now open
[106304.609924] slide (GPIO 71) is now closed
[106351.336212] slide (GPIO 71) is now open
[106449.156555] slide (GPIO 71) is now closed
[107228.289398] kb_lock (GPIO 113) is now closed
[107228.485290] kb_lock (GPIO 113) is now open
[130531.453247] regulator_disable: not in use by this consumer
[130531.453369] regulator_disable: not in use by this consumer
[130534.086395] slide (GPIO 71) is now open
[130546.875457] slide (GPIO 71) is now closed
[130562.781707] kb_lock (GPIO 113) is now closed
[130562.805145] kb_lock (GPIO 113) is now open
[ 3502.758270] proximity (GPIO 89) is now closed
[ 3515.695770] proximity (GPIO 89) is now open
[ 3522.047363] slide (GPIO 71) is now open
[ 3534.766113] slide (GPIO 71) is now closed
[ 4038.344268] slide (GPIO 71) is now open
[ 4103.797302] slide (GPIO 71) is now closed
[ 4340.773742] kb_lock (GPIO 113) is now closed
[ 4341.000244] kb_lock (GPIO 113) is now open
[ 7252.180145] slide (GPIO 71) is now open
EDIT: Took off the long post! :o

HeavyComponent 2010-06-27 14:15
Re: 16GB miniSD issue!!! HELP!
 
With SD card NOT inserted...

Code:
[ 3.098937] Disabling unused clock "ssi_ick"
[ 3.098968] Disabling unused clock "gpt10_ick"
[ 3.098999] Disabling unused clock "gpt11_ick"
[ 3.099029] Disabling unused clock "uart1_ick"
[ 3.099090] Disabling unused clock "uart2_ick"
[ 3.099121] Disabling unused clock "usbtll_ick"
[ 3.099151] Disabling unused clock "ssi_ssr_fck"
[ 3.099212] Disabling unused clock "uart1_fck"
[ 3.099243] Disabling unused clock "uart2_fck"
[ 3.099273] Disabling unused clock "usbtll_fck"
[ 3.099334] Disabling unused clock "ts_fck"
[ 3.099365] Disabling unused clock "cpefuse_fck"
[ 3.099426] Disabling unused clock "gpt11_fck"
[ 3.099456] Disabling unused clock "gpt10_fck"
[ 3.099487] Disabling unused clock "dpll5_ck"
[ 3.099548] Disabling unused clock "dpll4_m6x2_ck"
[ 3.099609] Disabling unused clock "dpll4_m5x2_ck"
[ 3.099639] Disabling unused clock "dpll3_m3x2_ck"
[ 3.099670] Disabling unused clock "sys_clkout1"
[ 3.100128] Bootup reason: pwr_key
[ 3.100219] OMAP GPIO switch handler initializing
[ 3.102874] slide (GPIO 71) is now closed
[ 3.102935] proximity (GPIO 89) is now open
[ 3.102966] kb_lock (GPIO 113) is now open
[ 3.102996] headphone (GPIO 177) is now disconnected
[ 3.103027] cam_shutter (GPIO 110) is now closed
[ 3.103057] cam_launch (GPIO 69) is now inactive
[ 3.103088] cam_focus (GPIO 68) is now inactive
[ 3.103118] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 3.123504] omapfb: acx565akm rev 8d LCD detected
[ 3.157989] tpa6130a2 2-0060: Headphone amplifier initialized successfully
[ 3.178680] UBIFS: recovery needed
[ 3.666107] UBIFS: recovery completed
[ 3.666168] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 3.666229] UBIFS: file system size: 254564352 bytes (248598 KiB, 242 MiB, 1973 LEBs)
[ 3.666259] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[ 3.666320] UBIFS: media format: 4 (latest is 4)
[ 3.666351] UBIFS: default compressor: lzo
[ 3.666381] UBIFS: reserved for root: 4384586 bytes (4281 KiB)
[ 3.666778] VFS: Mounted root (ubifs filesystem).
[ 3.666992] Freeing init memory: 144K
[ 5.290100] Registered led device: twl4030:vibrator
[ 5.569091] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
[ 5.766693] tsl2563 2-0029: model 7, rev. 0
[ 5.891754] lp5523 2-0032: LP5523 Programmable led chip found
[ 6.088317] Linux video capture interface: v2.00
[ 6.119110] I2C driver for Si4713 FM Radio Transmitter
[ 6.880249] Bluetooth: Core ver 2.15
[ 6.888977] i2c_omap i2c_omap.2: controller timed out
[ 6.898986] NET: Registered protocol family 31
[ 6.899017] Bluetooth: HCI device and connection manager initialized
[ 6.899078] Bluetooth: HCI socket layer initialized
[ 6.945739] lp5523 2-0032: got interrupt from led chip
[ 6.946319] lp5523 2-0032: interrupt from led chip 4f
[ 6.946350] lp5523 2-0032: all engines configured
[ 6.946380] lp5523 2-0032: disabling engines
[ 6.946990] Registered led device: lp5523:kb1
[ 6.947143] Registered led device: lp5523:kb2
[ 6.947265] Registered led device: lp5523:kb3
[ 6.947418] Registered led device: lp5523:kb4
[ 6.947540] Registered led device: lp5523:b
[ 6.947662] Registered led device: lp5523:g
[ 6.947784] Registered led device: lp5523:r
[ 6.947937] Registered led device: lp5523:kb5
[ 6.948059] Registered led device: lp5523:kb6
[ 6.990203] hci_h4p hci_h4p: Registering HCI H4P device
[ 7.030883] radio-si4713 2-0063: Detected Si4713 (0x0d) Firmware: 3.0 Patch ID: 00:00 Component: 3.0 Chip Rev.: unknown
[ 7.149322] nokia-av nokia-av: accessory detect module initialized
[ 7.156707] TSC2005 driver initializing
[ 7.157379] input: TSC2005 touchscreen as /class/input/input3
[ 7.214141] mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock
[ 7.334747] mmci-omap-hs mmci-omap-hs.1: Failed to get debounce clock
[ 7.664398] omap_wdt omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec, nowayout is on
[ 7.685455] SSI DRIVER Version 1.1-rc2
[ 7.686218] omap_ssi omap_ssi: SSI Hardware REVISION 1.0
[ 7.756164] phy0: Selected rate control algorithm 'minstrel'
[ 7.811004] mmc1: new high speed MMC card at address 0001
[ 7.813018] smc91x: not found (-19).
[ 7.818267] mmcblk0: mmc1:0001 MMC32G 29.8 GiB
[ 7.818695] mmcblk0: p1 p2 p3
[ 7.846923] wl1251: loaded
[ 7.847625] wl1251: initialized
[ 8.227539] CMT speech driver v0.2.0
[ 8.355377] NET: Registered protocol family 35
[ 8.422271] SSI McSAAB PROTOCOL Version: 2.0-rc1
[ 8.687438] dspbridge_init: 412800 bytes @ 80600000
[ 8.809112] omap-iommu omap-iommu.1: isp registered
[ 9.013305] omap-iommu omap-iommu.1: isp: version 1.1
[ 9.188262] smia-sensor 2-0010: firmware: requesting smia-sensor-01-022b-04.bin
[ 9.221282] smia_reglist_import: meta_reglist version 2009-07-27
[ 9.221374] smia_reglist_import: type 10 w 648 h 488fmt 30314142 ival 100/1502 ptr d0ccc2a0
[ 9.221374] smia_reglist_import: type 10 w 648 h 488fmt 30314142 ival 100/3003 ptr d0ccc228
[ 9.221405] smia_reglist_import: type 1 w 0 h 0 fmt 30314142 ival 100/0 ptr d0ccc090
[ 9.221435] smia_reglist_import: type 0 w 0 h 0 fmt 30314142 ival 100/0 ptr d0ccc038
[ 9.234130] et8ek8 3-003e: firmware: requesting et8ek8-0002.bin
[ 9.257568] smia_reglist_import: meta_reglist version V14 03-June-2008
[ 9.257659] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314442 ival 100/1292 ptr d0ccf1f4
[ 9.257690] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314142 ival 100/399 ptr d0ccf454
[ 9.257720] smia_reglist_import: type 10 w 1296 h 984fmt 30314142 ival 100/501 ptr d0ccf57c
[ 9.257720] smia_reglist_import: type 10 w 1296 h 984fmt 30314442 ival 100/2500 ptr d0ccf614
[ 9.257751] smia_reglist_import: type 10 w 1296 h 984fmt 30314442 ival 100/3000 ptr d0ccf28c
[ 9.257781] smia_reglist_import: type 10 w 864 h 656fmt 30314142 ival 100/2988 ptr d0ccf324
[ 9.257781] smia_reglist_import: type 10 w 648 h 492fmt 30314142 ival 100/499 ptr d0ccf4e4
[ 9.257812] smia_reglist_import: type 10 w 648 h 492fmt 30314142 ival 100/2993 ptr d0ccf3bc
[ 9.257812] smia_reglist_import: type 1 w 2592 h 1968 fmt 30314142 ival 100/1207 ptr d0ccf04c
[ 10.215026] NET: Registered protocol family 10
[ 10.215698] lo: Disabled Privacy Extensions
[ 10.216217] ADDRCONF(NETDEV_UP): phonet0: link is not ready
[ 10.248321] g_file_storage gadget: File-backed Storage Gadget, version: 7 August 2007
[ 10.248382] g_file_storage gadget: Number of LUNs=2 Number of buffers=16
[ 10.248443] musb_hdrc musb_hdrc: MUSB HDRC host driver
[ 10.249053] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
[ 10.249542] usb usb1: configuration #1 chosen from 1 choice
[ 10.249786] hub 1-0:1.0: USB hub found
[ 10.249877] hub 1-0:1.0: 1 port detected
[ 12.729278] Adding 786424k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:786424k
[ 13.041076] proximity (GPIO 89) is now closed
[ 13.834350] proximity (GPIO 89) is now open
[ 15.932952] kjournald starting. Commit interval 1 seconds
[ 15.948181] EXT3 FS on mmcblk0p2, internal journal
[ 15.948211] EXT3-fs: recovery complete.
[ 15.952392] EXT3-fs: mounted filesystem with writeback data mode.
[ 18.148101] McSAAB: ACWAKE DOWN
[ 18.148162] McSAAB: ACWAKE UP
[ 18.148193] McSAAB: WAKELINES TEST OK
[ 18.148590] ADDRCONF(NETDEV_CHANGE): phonet0: link becomes ready
[ 18.277282] Bluetooth: L2CAP ver 2.13
[ 18.277313] Bluetooth: L2CAP socket layer initialized
[ 18.387237] Bluetooth: SCO (Voice Link) ver 0.6
[ 18.387268] Bluetooth: SCO socket layer initialized
[ 18.395080] hci_h4p hci_h4p: firmware: requesting bcmfw.bin
[ 19.068756] Bluetooth: RFCOMM socket layer initialized
[ 19.068817] Bluetooth: RFCOMM TTY layer initialized
[ 19.068847] Bluetooth: RFCOMM ver 1.11
[ 22.325073] misc iphb: Module registered in 2.6.28.10power37, built May 26 2010 00:25:25
[ 53.101409] cfg80211: Regulatory domain changed to country: US
[ 53.101440] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 53.101440] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 53.101470] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 53.101470] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 53.101501] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 53.101501] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 53.101531] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 55.906250] SCSI subsystem initialized
[ 55.994873] gprs0: attached
[ 56.268035] Driver 'sd' needs updating - please use bus_type methods
[ 74.482788] slide (GPIO 71) is now open
In the list I've seen this at the end...

Driver 'sd' needs updating - please use bus_type methods

How do I get it updated?

Thanks

EDIT: Took off the long post sorry! :o


All times are GMT. The time now is 23:20.
Page 1 of 6 1 23 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8