![]() |
Re: [Announce] Bluetooth PBAP and IrMC / Carkit support is coming to N900...
Quote:
Can you please try obexd-0.46 with stock kernel? It seems to me that the problem is in L2CAP transport. Old obexd doesn't support L2CAP transport (just RFCOMM). And I find some patch related to the L2CAP in kernel-power. Unfortunately I'm not able to install so old cssu-stable to check it. |
Re: [Announce] Bluetooth PBAP and IrMC / Carkit support is coming to N900...
Quote:
Quote:
However don_falcone can you please also try to test the bluez-4.99 + obexd-0.46 with stock kernel (neither kernel-cssu nor KP)? (EDITED: it seems the blues-4.99 problem is somewhere else as merlin1991 reproduced it with stock kernel - but the hope die as the last one) Just in case it's similar problem with pinochio one. However it seems I have to take a look into bluez kernel part :( |
Re: [Announce] Bluetooth PBAP and IrMC / Carkit support is coming to N900...
RFCOMM without L2CAP? Isn't RFCOMm supposed to work ontop of L2CAP?
EDIT: :P ;) Yes, it was also at least a full month in between. I could only create an outgoing port (which makes no difference), an incoming can only be created if something "special" runs on the mobile side - i experienced this with my old N73. Symbian OPM's sync agent had to run, then Windows would discover this "service" / "port" and let you create an incoming COM port. Otherwise, you could not choose a device first, which is obligatory. |
Re: [Announce] Bluetooth PBAP and IrMC / Carkit support is coming to N900...
Quote:
Quote:
|
Re: [Announce] Bluetooth PBAP and IrMC / Carkit support is coming to N900...
3 Attachment(s)
@pinochio, don_falcone: please test stock kernel first with the official obexd-0.46.
After that can you also try kernel-power (or whatever kernel are you using now - before going back to the stock kernel) with this dev obexd package(s)? This experimental package(s) should fix the Win -> N900 direction. However please test both direction and give me the result. FYI I disabled plain L2CAP support for OPP and FTP profiles for server side (also known as GOEP 2.0 - faster transfer). |
Re: [Announce] Bluetooth PBAP and IrMC / Carkit support is coming to N900...
3 Attachment(s)
I did reflash, I have obexd 0.18 and stock kernel, and I can look on the N900 with my laptop. I have installed automatically Bluetooth-services as pictured, not installed is one a service, it may pose a conflict?
|
Re: [Announce] Bluetooth PBAP and IrMC / Carkit support is coming to N900...
4 Attachment(s)
...seems i should switch back from patching CM ROMs to Maemo...
In comparison; here are my hardware & services tabs under obexd0.46 ; i'll test in next minutes if posted packages bring a difference. |
Re: [Announce] Bluetooth PBAP and IrMC / Carkit support is coming to N900...
Quote:
Keep the stock kernel and install please obexd-0.46 (if it's still working or not - from http://merlin1991.at/~luf/obexd/obex...ssu1_armel.deb) I need to know if stock kernel with obexd-0.46 is working well or has the issue. 2) As the second step let's try install cssu-thumb (or whatever you prefer) and try obexd attached in my previous post (dev1). I'm on #maemo-ssu if you need more support. |
Re: [Announce] Bluetooth PBAP and IrMC / Carkit support is coming to N900...
Quote:
(please report here the kernel you're using: dpkg -l | grep kernel ) 2) let's try stock kernel + bluez-4.99 + obexd-0.46 (please also report the kernel: dpkg -l kernel ) |
Re: [Announce] Bluetooth PBAP and IrMC / Carkit support is coming to N900...
2 Attachment(s)
EDIT: At least both directory browsing during "send files to the (N900) computer" and actually sending something over works now. In direction of N900 -> Win7, same old situation.
This is with the above attached obexd 0.46 dev packages, bluez 4.99, and KP52 (CSSU3 works too, but i'm not able to boot into stock kernel): |
| All times are GMT. The time now is 04:56. |
vBulletin® Version 3.8.8