maemo.org - Talk
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Troubleshooting (https://talk.maemo.org/forumdisplay.php?f=6)
-   -   Can't update Application Catalogue (https://talk.maemo.org/showthread.php?t=5932)

heavyt 2007-04-20 16:34
Re: Can't update Application Catalogue
 
Just for grins see if you can install Xterm http://test.maemo.org/downloads/syst...uct_dba_page=3
it should be 1/2 way down the page. If you can then follow the link I posted earlier. If you can not install Xterm what about re-flashing your N800?

jhford 2007-04-20 16:46
Re: Can't update Application Catalogue
 
Quote:
Originally Posted by DryLand404 (Post 45225)
This should be a software problem so re flashing will certainly fix it. However, I would go into Application manager and go into each repository definition and disable each one Via the check box, and then work from there to determine which one is not working. The last or near last line in the log should show which repository address cannot be reached.
I did that.
The last line of the log says:
W: Couldn't start source package list http://catalogue.tableteer.nokia.com

jhford 2007-04-20 16:58
Re: Can't update Application Catalogue
 
Quote:
Originally Posted by heavyt (Post 45227)
Just for grins see if you can install Xterm http://test.maemo.org/downloads/syst...uct_dba_page=3
it should be 1/2 way down the page. If you can then follow the link I posted earlier. If you can not install Xterm what about re-flashing your N800?
Sorry. Tried but no grin. Still won't refresh list.

heavyt 2007-04-20 17:02
Re: Can't update Application Catalogue
 
Quote:
Originally Posted by jhford (Post 45229)
I did that.
The last line of the log says:
W: Couldn't start source package list http://catalogue.tableteer.nokia.com
So did you disable that one? What about re-flash?

jhford 2007-04-20 17:08
Re: Can't update Application Catalogue
 
Quote:
Originally Posted by heavyt (Post 45233)
So did you disable that one? What about re-flash?
The only one that's enabled is "Nokia Catalogue" and it can't be disabled.
As to reflashing, I did the upgrade again this morning which didn't change anything.

heavyt 2007-04-20 17:13
Re: Can't update Application Catalogue
 
Man that is strange. :confused: Did you do a backup before the re-flash and then used that backup? If so what about re-flash without a backup?

jhford 2007-04-20 17:16
Re: Can't update Application Catalogue
 
Quote:
Originally Posted by heavyt (Post 45236)
Man that is strange. :confused: Did you do a backup before the re-flash and then used that backup? If so what about re-flash without a backup?
Yes. I did restore my backup. Do you think re-upgrading and not restoring would make the difference?

And I have to make a confession. I did this some time ago:
http://www.informit.com/guides/conte...9&ns=9905&rl=1
Then a couple of days ago, I did the regular upgrade (can't remember why). Maybe that caused my problem. I don't even think I'll ever use the R&D mode and wish I could get rid of it, but that's not possible if I can't use Xterm.

heavyt 2007-04-20 17:21
Re: Can't update Application Catalogue
 
Quote:
Originally Posted by jhford (Post 45237)
Yes. I did restore my backup. Do you think re-upgrading and not restoring would make the difference?
I would give it a try before sending it back. I heard it can take till the next big flood before Nokia will send it back (read some of the post on this).

jhford 2007-04-20 17:24
Re: Can't update Application Catalogue
 
Quote:
Originally Posted by heavyt (Post 45239)
I would give it a try before sending it back. I heard it can take till the next big flood before Nokia will send it back (read some of the post on this).
Please read my edit, above.

heavyt 2007-04-20 17:39
Re: Can't update Application Catalogue
 
Like I said if it was me I would re-flash and start fresh (no backup). I don't know what setting or conf you have change so a fresh start is what I would do. Yes you could say I am using a hammer to crack a nut by not using a backup.


All times are GMT. The time now is 16:01.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8