maemo.org - Talk - Share your Widgets!

maemo.org - Talk (https://talk.maemo.org/index.php)

- Applications (https://talk.maemo.org/forumdisplay.php?f=41)

- - Share your Widgets! (https://talk.maemo.org/showthread.php?t=59798)

Re: Share your Widgets!

Here you go:

Code:

: not foundacl.sh: line 4: 

: not foundacl.sh: line 5: 

: not foundacl.sh: line 8: {

: not foundacl.sh: line 9: 

: not foundacl.sh: line 10: }

: not foundacl.sh: line 11: 

/home/user/acl.sh: line 12: syntax error: word unexpected (expecting "in")

Second code opens up conky.

Re: Share your Widgets!

Please be more specific than "it opens conky".Does it open conky with my configuration or the default one.
The zip was recently updated,are you sure you are using the new one?

Re: Share your Widgets!

Quote:

Originally Posted by techie (Post 852990)

Please be more specific than "it opens conky".Does it open conky with my configuration or the default one.
The zip was recently updated,are you sure you are using the new one?

Not the default one, it opens your version of conky. I've downloaded zip from your post on page 10. That must be the updated version? Can't see any other.

Re: Share your Widgets!

Ok thanks.
For those having problem with conky widget, replace the script with the attached one (remove .txt extension) in /home/user/ and report back.
Problem seems to be N900-specific

Code:

#!/bin/sh

TAB=${1}

QBW_HOTSPOT_PRESS=${2}

QBW_ID=${3}

LOC="/home/user"

remember_me()

{

    run-standalone.sh dbus-send --session --type=method_call --dest=oh.no.more.qbw /oh/no/more/qbw$QBW_ID oh.no.more.qbw.set_param_string string:"rememberMe" string:"$QBW_HOTSPOT_PRESS" string:"";

}



case $QBW_HOTSPOT_PRESS in

[123])



    if [ "$QBW_HOTSPOT_PRESS" -ne "$TAB" ]; then

        remember_me

    fi

    TAB=$QBW_HOTSPOT_PRESS;

    ;;

esac

echo -e "\n"

case $TAB in

1)

       echo -e "Texas Instruments OMAP 3430:\n\tARM Cortex A8 (65-nm)\n\tPowerVR SGX530 GPU"

       case $QBW_HOTSPOT_PRESS in

    [456789])

        osso-xterm -e "nohup conky -qdc $LOC/CPU_conky.conf & exit"

             ;;

       esac

    exit 0

    ;;

2)

       echo -e "<span font = \"11\"><b>BL-5J 3.7V 1320mAh Li-Ion battery\n256 MB NAND (UBIFS)\n32GB eMMC:</b></span>"

       echo -e "\t<span font = \"11\">* 768 MB swap  * 2 GB /home (ext3)\n\t* 27 GB  /home/user/MyDocs (VFAT)</span>"

    case $QBW_HOTSPOT_PRESS in

    [456789])

        osso-xterm -e "nohup conky -qdc $LOC/Resource_conky.conf & exit"

              ;;    

    esac    

    exit 1

    ;;

3)

       echo "WLAN 802.11 b/g (wl1251)"

       case $QBW_HOTSPOT_PRESS in

    [456789])

        osso-xterm -e "nohup conky -qdc $LOC/Network_conky.conf & exit"

              ;;

       esac

       exit 2

    ;;

*)

    echo "UNKNOWN TAB $TAB"

    ;;

esac

Re: Share your Widgets!

@techie one question to this new orientation feature in queen beecon widgets, would it be possible for you to tweak your conky cmd/script widget to rotate and bring up conky wondows to fit the orientation the phone is in, portrait/landscape?

Maybe to much work but would be nice if you could (don´t know if it´s doable at all ;)

(Was originally posted in the QBW thread, but removed and posted here instead. More relevence here).

Re: Share your Widgets!

Quote:

Originally Posted by Dousan (Post 856446)

The conky windows are controlled by conky itself and AFAIK the current version of conky does not support orientation.
A newer build of conky might make this possible but even then the configuration files will need to be adjusted accordingly for portrait display.

Re: Share your Widgets!

Thanks for the answer techie, that makes sense, just would've been nice ;)

Re: Share your Widgets!

I'm looking to get just the temperature displayed in a beecon widget. What do I need to edit from this widget to just get the temperature displayed? The 'Command'? Does anyone have an example command they could share?

Re: Share your Widgets!

Quote:

Originally Posted by chargen (Post 858573)

If you are using the stock kernel then the use this code to display temperature:

Code:

echo `cat /sys/devices/platform/omap34xx_temp/temp1_input` °C

However the values reported by above are not very accurate.I would recommend you install the enhanced power kernel from the repos (Overclocking is not enabled by default so you can use it safely) and use the code below to read temperature:

Code:

echo `cat /sys/class/power_supply/bq27200-0/temp` °C

To get the temperature working in the first place:

Code:

sudo gainroot

modprobe bq27x00_battery

The above will load the temperature module.

To get it to load on boot

Code:

echo bq27x00_battery >> /etc/modules

Re: Share your Widgets!

Code:

echo `cat /sys/class/power_supply/bq27200-0/temp` °C

To get the temperature working in the first place:

Code:

sudo gainroot

modprobe bq27x00_battery

The above will load the temperature module.

To get it to load on boot

Code:

echo bq27x00_battery >> /etc/modules

[/QUOTE]

Wow, thanks a ton! That was easier than I expected to implement. I was a bit intimidated by Queen Beecon and still have a lot to learn, but this was pretty easy to get working!
Thanks again