maemo.org - Talk
Page 63 of 105 « First 536162 63 646573 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   OS2008 / Maemo 4 / Chinook - Diablo (https://talk.maemo.org/forumdisplay.php?f=29)
-   -   [Announce] advanced-systemui (ASUI) (https://talk.maemo.org/showthread.php?t=63292)

auouymous 2011-05-17 11:26
Re: [Announce] advanced-systemui
 
Quote:
Originally Posted by tso (Post 1008044)
well it booted. But screen blanking is still misbehaving.
Does the dmesg command show anything?

tso 2011-05-17 13:08
Re: [Announce] advanced-systemui
 
nothing that sticks out. only thing that i do not recall seeing before i installed diablo-turbo is this:

Code:
menelaus 1-0072: Setting voltage 'VDCDC3' to 2800 mV (reg 0x07, val 0x29)
also, now the blanking issue have become basically permanent. It shows up each time i reboot, and only goes away once i have restarted MCE (makes it dim but not fully blank) and then fiddled with the display settings.

auouymous 2011-05-17 15:15
Re: [Announce] advanced-systemui
 
Quote:
Originally Posted by tso (Post 1008151)
also, now the blanking issue have become basically permanent. It shows up each time i reboot, and only goes away once i have restarted MCE (makes it dim but not fully blank) and then fiddled with the display settings.
What happens if you set systemui to start at boot (can be toggled in asui-settings:services) and then reboot?

You can also try uninstalling diablo-turbo if the problem persists with systemui.
Code:
apt-get remove kernel-dt-sd
@ maacruz, will he need to downgrade/uninstall any of the other packages?

tso 2011-05-17 15:30
Re: [Announce] advanced-systemui
 
systemui behaves normally, blank on lock and all.

auouymous 2011-05-17 15:35
Re: [Announce] advanced-systemui
 
New test binary.
  • fix: blanking pause detection issue when blank and dim timeouts are identical
  • button to change system, keypad and touchscreen volumes

@ tso, this won't solve any of your problems but it will change any expected DIMs to OFFs and prevent blanking pause messages if you turn the screen back on immediately after it turns off.

--

I use touch screen sounds but find them annoying when listening to music or podcasts through headphones so I added a button to quickly change the volume of system alerts, keypad and touchscreen sounds. A dark gray bar means the sound is off, 50% white is level 1 and 100% white is level 2.


Quote:
Originally Posted by tso (Post 1008256)
systemui behaves normally, blank on lock and all.
hmm

tso 2011-05-17 15:49
Re: [Announce] advanced-systemui
 
asui also seems to behave correctly when running it after booting with systemui, but booting with asui enabled brings back the issue.

tso 2011-05-17 16:06
Re: [Announce] advanced-systemui
 
hrmf, using asui settings to stop systemui and then start asui (from a systemui boot) resulted in the blanking issue showing up. And trying to go back to systemui resulted in systemui not showing on pressing the power button...

maacruz 2011-05-17 17:42
Re: [Announce] advanced-systemui
 
Quote:
Originally Posted by tso (Post 1008298)
hrmf, using asui settings to stop systemui and then start asui (from a systemui boot) resulted in the blanking issue showing up. And trying to go back to systemui resulted in systemui not showing on pressing the power button...
Once MCE goes nuts, it has to be restarted to work again.
Try this kernel, it has preemption disabled: https://garage.maemo.org/frs/downloa...mage-nopreempt

tso 2011-05-17 17:58
Re: [Announce] advanced-systemui
 
did not help from what i can tell.

tso 2011-05-17 18:11
Re: [Announce] advanced-systemui
 
btw, the latest asui test did not change much related to the dim rather then blank once i give mce a restart.


All times are GMT. The time now is 20:19.
Page 63 of 105 « First 536162 63 646573 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8