Re: Thread for problems getting USB hostmode working.
 

when i connect the wireless 2.4 ghz mouse ((((not bluetooht mouse))) with n900 after few moments its says that unable to connect no file system available any solution ?

Re: Thread for problems getting USB hostmode working.
 

Hello I have problem with one flash drive. I dont know why...
One flash drive with FAT16 work well. External HDD with NTFS work well but This 4GB flash with FAT32 do not.

I dont know why but kernel do not mount this drive like sda1

Here is Kernel export:

[ 9356.581268] usb 1-1: New USB device found, idVendor=058f, idProduct=6387
[ 9356.581329] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9356.581359] usb 1-1: Product: Mass Storage
[ 9356.581390] usb 1-1: Manufacturer: USB
[ 9356.581420] usb 1-1: SerialNumber: 1F62ABCB
[ 9356.581451] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 9356.581542] hub 1-0:1.0: port 1 enable change, status 00000503
[ 9356.720764] Initializing USB Mass Storage driver...
[ 9356.721160] usb-storage 1-1:1.0: usb_probe_interface
[ 9356.721252] usb-storage 1-1:1.0: usb_probe_interface - got id
[ 9356.724273] scsi0 : SCSI emulation for USB Mass Storage devices
[ 9356.739410] usbcore: registered new interface driver usb-storage
[ 9356.739532] USB Mass Storage support registered.
[ 9356.751098] usb-storage: device found at 2
[ 9356.751129] usb-storage: waiting for device to settle before scanning
[ 9361.752319] usb-storage: device scan complete
[ 9361.753753] scsi 0:0:0:0: Direct-Access USB USB 2.0 Flash 8.07 PQ: 0 ANSI: 2
[ 9361.766571] sd 0:0:0:0: [sda] 7946240 512-byte hardware sectors: (4.06 GB/3.78 GiB)
[ 9361.766876] sd 0:0:0:0: [sda] Write Protect is off
[ 9361.766876] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 9361.766906] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9361.771240] sd 0:0:0:0: [sda] 7946240 512-byte hardware sectors: (4.06 GB/3.78 GiB)
[ 9361.771514] sd 0:0:0:0: [sda] Write Protect is off
[ 9361.771545] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 9361.771575] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9361.771606] sda:
[ 9362.093078] sd 0:0:0:0: [sda] Attached SCSI removable disk

Re: Thread for problems getting USB hostmode working.
 

see http://talk.maemo.org/showpost.php?p...&postcount=119
it might help

Re: Thread for problems getting USB hostmode working.
 

hello...i'm having problem connecting my pendrive..i had no problem before this...but somehow i can't seem to mount the pendrive..the mount button doesn't seem to work..

and also, i kept getting different kernel messages..i've attached the different kernel message output below..

i got "port 1 not reset yet", "Forced hostmode error: a full/low-speed device attached but high-speed mode selected", "rejecting I/O to dead device", "Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2"..

those messages appeared in different logs..everytime i failed to mount, i exit, unplugged the cable, and restart H-E-N, but then i got a different message..this goes on and on..

pls help..

Attachment 17546

Attachment 17547

Attachment 17548

Attachment 17549

Re: Thread for problems getting USB hostmode working.
 

look at ok sequence

[20268.602447] hub 1-0:1.0: port 1 enable change, status 00000101
[20270.602142] hub 1-0:1.0: hub_suspend
[20270.602233] usb usb1: bus auto-suspend
[20339.805114] slide (GPIO 71) is now open
[20360.664581] slide (GPIO 71) is now closed
[20363.013183] twl4030_usb twl4030_usb: HW_CONDITIONS 0x54/84; link 3
[20390.143859] usb usb1: usb resume
[20390.164459] hub 1-0:1.0: hub_resume
[20390.164520] hub 1-0:1.0: port 1: status 0101 change 0001
[20390.274017] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[20390.274078] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[20390.399169] usb 1-1: new high speed USB device using musb_hdrc and address 34
[20390.556976] usb 1-1: default language 0x0409
[20390.566711] usb 1-1: uevent
[20390.566925] usb 1-1: usb_probe_device
[20390.566955] usb 1-1: configuration #1 chosen from 1 choice
[20390.570831] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[20390.571197] usb 1-1:1.0: uevent
[20390.571441] libusual 1-1:1.0: usb_probe_interface
[20390.571533] libusual 1-1:1.0: usb_probe_interface - got id
[20390.571685] usb-storage 1-1:1.0: usb_probe_interface
[20390.571746] usb-storage 1-1:1.0: usb_probe_interface - got id
[20390.667022] scsi2 : SCSI emulation for USB Mass Storage devices
[20390.673095] /home/r00t/MyDocs/kernel-power-2.6.28-power46-wl1/drivers/usb/core/inode.c: creating file '034'
[20390.673797] usb 1-1: New USB device found, idVendor=0951, idProduct=1607
[20390.673858] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

esp the timestamps in there

you need to be patient with hostmode startup. It might take up to 20s (on sluggish devices) after vbus on, until you can enumerate. It may take another while from a successful enumerate until the device file ( /dev/* ) gets created so you can mount it.

Re: Thread for problems getting USB hostmode working.
 

here is the link of that keyboard and mouse which i want to connect with my n900

http://www.vmart.pk/main/labtec-ultr...top-p-703.html

plz help me and guide me that how to connect it with n900

Re: Thread for problems getting USB hostmode working.
 

thank you sir..however, i still can't get it to detect..i waited like a minute after tapping the vbus boost, another minute after enumerate, and another minute after mount..nothing happens either..

then i got "unable to connect to filesystem"...hmm..reinstalling doesn't seem to work..but i can get mouse to work..

Re: Thread for problems getting USB hostmode working.
 

GREETS AGAIN.
I have a question for which no one anywhere I can not answer.
As you can see it is possible (http://www.youtube.com/watch?v=zDzUG-bno6Q ) I have the same dvd-rom.
I have a kernel-power in 45, and additions to handle MohammadAG cd-rom.
information to the kernel.

[5162.718414] USB Mass Storage support registered.
[5162.721343] usb-storage: device found at 3
[5162.721374] usb-storage: waiting for device to settle before scanning
[5167.715332] usb-storage: device scan complete
[5167.716674] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SE-T084M TD00 PQ: 0 ANSI: 0
NO dev/sr0
Where should I look for and ask nowhere and interest solution to this issue.
THANK YOU GREETS

Re: Thread for problems getting USB hostmode working.
 

Mice do not have file systems, so message seems reasonable to me. Do you have extmou installed? If not install it and check if mouse cursor appears after you press enumerate. And do not press mount button, mouse cannot be mounted.

Re: Thread for problems getting USB hostmode working.
 

I'm getting this error
I have latest firmware
Please tell me what I need to do to get hostmode workin with latest nokia firmware



your kernal has no proper matching version of hostmode api
Version 2010110 required.
Kernel-power v46 is suggested