maemo.org - Talk - [Announce] kernel-power stable v49 in Extras-Testing

In addition, i daily use Cony to monitor process in background, there is not something wrong running in background. It just seems that my battery is recognized with less capacity than usual.

it happened to my device, too. i also use conky to monitor the background processes, and found that the cpu was not busy, but the frequency seems locked up in max frequency (fyi, i use dsp profile).
but when i reboot the device, everything is back to normal.

thedarkus

2012-02-03 08:07

Re: [Announce] kernel-power stable v49 in Extras-Testing

Quote:

Originally Posted by Estel (Post 1159138)

Well, after upgrading to kp49 I had bq_27x00 added to /etc/modules (for unknown reason, as I certainly haven't put it there, but for other people sole KP installation wasn't resulting in adding it there too), so it was ignoring /etc/modules.d/blacklist.

So, thedarkus, please ensure that it isn't listed there (thus, loaded at boot time).

/Estel

I found that module excluded from loading in another file

more /etc/modprobe.d/kernel-power.blacklist

d!

thedarkus

2012-02-03 08:14

Re: [Announce] kernel-power stable v49 in Extras-Testing

Quote:

Originally Posted by coredumb (Post 1159815)

Oh, thank you for your reply, but is not what happened to me, frequencies change quickly depending on the cpu's load. I'm running an ulv profile now

d!

ibrakalifa

2012-02-03 08:15

Re: [Announce] kernel-power stable v49 in Extras-Testing

and random reboot happens when oc to 1ghz, with kp48 it was ok, web also always reload when overclocked over than 850mhz, =='

thedarkus

2012-02-03 08:32

Re: [Announce] kernel-power stable v49 in Extras-Testing

1 Attachment(s)

Quote:

Originally Posted by freemangordon (Post 1159800)

@thedarcus - please post here your powertop output.

Ok, here is powertop' output

d!

vi_	2012-02-03 08:52

Re: [Announce] kernel-power stable v49 in Extras-Testing

Quote:

Originally Posted by thedarkus (Post 1159844)

Ok, here is powertop' output

d!

Lol, you have far to much trash installed. I am afraid it is reflash time.

Code:

38 | 186D| awk | cpufreq_governor_dbs (delayed_work_timer_fn)

This is the frequency scalling govenor. At most I would expect it to be 15-30 wake ups corresponding to what you have set as the sampling time. What CPU TWEAKZ APPZ have you installed? It is like there is an epic battle for control of the CPU scalling govenor.

Also, output of 'lsmod' here.

thedarkus

2012-02-03 08:56

Re: [Announce] kernel-power stable v49 in Extras-Testing

Lol, man, i really don't what happened here :D I flashed the device, installed the power kernel 49, installed cssu updates and installed qCPuFreq, nothin more :D

I'm going to remove qCpuFreq right now, let's give a try in this way

d!

freemangordon

2012-02-03 09:00

Re: [Announce] kernel-power stable v49 in Extras-Testing

Quote:

Originally Posted by thedarkus (Post 1159844)

Ok, here is powertop' output

d!

Well, that is useless. Please, do it again with all applications closed, i.e. no imageviewer or Calendar running. Just follow the steps bellow:

1. reboot
2. wait 10 minutes device to settle down.
3. open xterm
4. do sudo gainroot
5. start powertop and immediately lock the device
6. wait about 90 secs.
7. post powertop result here.

thedarkus

2012-02-03 09:05

Re: [Announce] kernel-power stable v49 in Extras-Testing

There were not application running in that moment. I did a reboot just a minute before saving powertop output.

But i'm going to try in the way you suggested me, ready for reboot.

Oh, i have also removed qCpuFreq

d!

All times are GMT. The time now is 16:33.

Page 272 of 300

272

Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8