maemo.org - Talk
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Applications (https://talk.maemo.org/forumdisplay.php?f=41)
-   -   aircrack-ng works in maemo, but not in easy debian (https://talk.maemo.org/showthread.php?t=71984)

mr_pingu 2011-04-20 13:31
Re: aircrack-ng works in maemo, but not in easy debian
 
Quote:
Originally Posted by stlpaul (Post 985845)
FWIW i'm using wifite.py in normal maemo and it works. ;)

Get aircrack-ng 1.1 from here:
http://talk.maemo.org/showpost.php?p...3&postcount=56
How did you install? I used dpkg -i get error: depencies problems, iw is not installed. however aircrack-ng from the repos conflicts with iw.
Currently I have aircrack-ng 1.0 from the repos. Tried to install iw, but ended up removed aircrack-ng and then I installed the deb from creamy.

But then no aircrack-ng application from the suite showed up.
bin/sh/ aircrack not found
bin/sh/ airmon not found,

So that doesn't seem right.

jd4200 2011-04-20 14:05
Re: aircrack-ng works in maemo, but not in easy debian
 
OP: I haven't played around much with easydebian, but it could be the fact that two OS's are trying to manage the wireless card; to capture the WPA handshake I'm pretty sure you have to be locked to the same channel the access point is using (no channel hopping).

If easydebian comes with a network manager, such as wicd or NetworkManager, that could be causing the card to be hopping channels.

Try disabling them in debian:
sudo /etc/init.d/wicd stop

and when putting your card in monitor mode specifiy the channel:
sudo iwconfig wlan0 channel XX (where 'XX' is the channel)

Terror Factor 2011-04-27 23:29
Re: aircrack-ng works in maemo, but not in easy debian
 
Quote:
Originally Posted by jd4200 (Post 992538)
OP: I haven't played around much with easydebian, but it could be the fact that two OS's are trying to manage the wireless card; to capture the WPA handshake I'm pretty sure you have to be locked to the same channel the access point is using (no channel hopping).

If easydebian comes with a network manager, such as wicd or NetworkManager, that could be causing the card to be hopping channels.

Try disabling them in debian:
sudo /etc/init.d/wicd stop

and when putting your card in monitor mode specifiy the channel:
sudo iwconfig wlan0 channel XX (where 'XX' is the channel)
I'll try that asap.
A note: I tried cracking a WEP key with wifite.py in EasyDebian, and that worked perfectly.
IIRC, airodump-ng doesn't switch channels in EasyDebian (or at least it show it like that).
Also, I activate monitormode in maemo, and don't set anything different in EasyDebian(wlan0 already shows up in monitor mode in ED)

EDIT: just tried both things you've mentioned, but without any difference.
The airodump-ng screens in maemo and debian are very alike: same AP's/clients, about the same data captured and lost, same power, same enc/auth/cipher etc etc, just that the airodump-ng in debian doesn't seem to capture the handshake:/

I'll upload a capture from both tomorrow, maybe it's an airodump-ng bug, and it does capture the handshake, but doesn't recognize it, or something like that?

Terror Factor 2011-05-10 20:19
Re: aircrack-ng works in maemo, but not in easy debian
 
anyone? *bump*

mr_pingu 2011-05-15 19:50
Re: aircrack-ng works in maemo, but not in easy debian
 
got interested in this too... bump

Terror Factor 2011-05-25 21:14
Re: aircrack-ng works in maemo, but not in easy debian
 
another bump; anyone?


All times are GMT. The time now is 11:14.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8