Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

What can I say... I am really impressed with this build. Thanks for your hard work.

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

a lot of assumptions....maybe you didnt read all my posts and just glanced at my last one and decided to make a dumb comment....

typical and to be expected in here lately!


i have tested many applications and given feedback to help developers over a long time....so you seem to think you know what you are talking about?....B.S

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

hmmm....is making the device always awake still or the only solution for battery to charge?

and any way to get battery readings on Nitdroid more accurate??

im ready to be told.....:)

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

That happened with me as well.
I just ran the dpkg -i command for the nitroid kernel, which I think re-installs it. Then you edit the multioot file as mentioned in the wiki.

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

I believe you have to edit the nitdroid boot file that is placed in /etc/multiboot.d/
Once you are there, ls to see what files you have for Nitdroid. It's name should start with 11. Edit that file as mentioned in the wiki. You will change the value mmcblk0p2 to mmcblk1p2. But check the wiki to be sure.

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

You said it yourself, "i have never used an android phone so my questions may be dumb!". Asking things that are written to wikis and have been discussed so many times is really annoying.

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

Thanks...........

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

dears, please help!
I have followed this way to update nitdroid::

root
cd /home/user/MyDocs
bzip2 -d n11_rc3.tar.bz2
cd /
mount /home /and
rm -rf /and/*
cd /and
tar xvf /home/user/MyDocs/n11_rc3.tar.bz2
dpkg -i /home/user/MyDocs/NITDroid-kernel-Mido.Fayad.deb

the line tar xvf ... has not work and my phone has restarted...

I can start it but without any icons and graphics so itś unusable:-(

I have tried to use NSU and flasher but not successfully because the phone will not connect (only USB device is successfull so I can browse the phone from PC) but no chance to connect it in PC-suite mode so I can´t reflash:-(

if I used flasher, I have started my phone with pressed "u" but it´s not connect correctly probably. i can write flasher-3.5.exe -F RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f -R and I receive this answer:
flasher v.2.5.2. (some date)
RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin: %m

is there any chance of some hard reset?
how to continue? what to do to make my phone alive again?
please help
Miroslav


(sorry for duplicate post, I am agonized)

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

New APN option is found in APN settings when you press your hardware lockslide-button.

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

Hi peps. I just installed N11 "Vostok" and I am still straglin with the android boot logo. Looks like just loading and laging.Nothing happ. I am did same think like in this topic http://forum.nitdroid.com/index.php?topic=343.0
but after that commands I just get 'no such file r directory'
thanks for help. :)

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

If you get this>>>> %m
It means that, you have not put your image in flasher folder or you have typed a wrong file name

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

Hi!

Usually flash fails because one has mispelled .
Try again!
Good luck.

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

I've been wanting to try N11 and can't seem to get it to play nicely.

I've had no troubles with previous versions 0.09 and gingerbread.

So I downloaded the new N11 tar.bz2 file and the suggested kernel and got the system to boot ok but during the boot process I get this:

smia-sensor 2-0010: firmware: requesting smia-sensor-01-022b-04.bin
smia-sensor 2-0010: : can't load
et8ek8 3-003e: firmware: requesting et8ek8-0002.bin
et8ek8 3-003e: firmware: can't load

I'm wondering whether these modules are important?

Also, I get random lockups when the UI is loading. I have removed as much as I can see settings relating to Nitsroid from my Mydocs.

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

Congratulations, you've removed everything in /home/

EMMC INSTALLATION is for ppl that KNOW WHAT THEY DO

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

Slide the lock button. There is an add option methinks.
________
LIVE SEX

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

found it! :) thanks! now everthing works good:) real nice though i perfer maemo its fun to have android sometimes! thanks to e-yes and all the devs!

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

i get a message at the end or trying to install N11.

tar: Exiting with failure status due to previous errors

whats does this mean.

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

Thank you.I have changed the value as suggested and it boots into android but it still does not see my audio files on my sd card. It did say scanning sd card but it still only shows the audio files from the webos game monopoly that i have installed in maemo.

the method i used was:

root
cd /and
leafpad /etc/multiboot.d/11 (then press TAB)
....i then edited the leafpad file to change the values from mmcblk0p2 to mmcblk1p2

all looked ok but after the sd card was scanned it did not show my albums/songs that are on the card....all it shows is the sfx and snd files from the monoploly game.

i have tried a few restarts but still no joy.

many thaks for the advice tho.

any suggestions on what could be the problem?

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

when flashing with the flasher3.5 did you place the RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM file in the flasher directory?

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

rm -rf /and/*
I never use that command when I uninstall the nitdroid, I just manual delete the folder and file in home directory

uninstall is easy, just remove multiboot, multiboot-kernel-maemo, multiboot-kernel-power, also the kernel of nitdroid
You can use faster application manager to do that, after remove just apt-get install --reinstall kernel-power kernel-power-flasher
then reboot, then you will have the rootfs space more

Finally, go to /home, delete the folder and file that nitdroid belongs to.
P.S opt and user folder is your maemo file, never delete it

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

First of all! I want to say thank you to the developer team of nitdroid! i downloaded the latest version and it works almost perfectly.

I'm really excited to install a full phone supporting version of nitdroid.

SMS recieving - works!
sms sending - not sure.

and even Phone Calling works, with the last small issue - The Voice just works in one direction :-D the other one can hear me but i can't here him

so keep on developing :)

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

to Alfred, keinola, Neotalk, TMavica

thank you very much for support and advices!

as usual it was very easy solution, just "O" as letter and "0" as zero... sorry to spent your time...

but thank you that I know again something more about this excellent phone:-)

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

now ive managed to install n11 on my phone.
its much faster than 0.0.9
phone calls are not working 100 percent.
only the person you are talking with can hear you

maybe in the next version we will be able to hear the person we are talkin with.

good job

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

Lol just bricked my phone with cmd rm -rf * wasn;'t in the dir /and ;)
Thank god i have been able to reanimate it..

I thought N11 was an update to the normal gingerbread release from nitdroid. cause i couldn't get it to extract it to /and had to remove the OLD files

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

anyone can post a guide for removing nitdroid vostok off N900? been looking for that but not being able to find it.

Thanks

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

Amazing work guys :) Thanks!

It sometimes gets unstable but overall its very good. Flash 10.2 , Angry Birds Seasons , Facebook , Twitter and almost any other high quality apps work just fine. Can wait for the next version

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

glad that helped.

I am a novice at maemo/linux so cannot really help with that. sorry. however, i do believe that the sd card android is scanning is your internal memory and not the external memory card.

someone more knowledgeable can hopefully help.

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

I tried to connect my bluetooth with another cellphone and it worked, however it would not detect my bluetooth headset. Wanted to check if bluetooth headset could work for calling purposes. worth a try, i guess.

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

@ rjneid follow the steps on the wiki page..works fine..

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

when using:

mount /dev/mmcblk0p2 /and -o noatime

it returns with a msg saying it's busy or in use ...

anyways thanks for the help, flashed my N900, it was so messed up and full of junk, and needed a fresh start.

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

Hi!
To swap knowledge is important.
Transparency is the real power of n900.
For example Samsung galaxy:s latest OS is android 2.3.3 as n900:s.
N900:s progress shows how small group can make wonders.
BR. keinola

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

I think I had the same problem with my nitdroid neotalk. I installed nitdroid on the emmc so nitdroid considers /home/user/MyDocs/ as my SD card, but the standard media player also does not recognize files that are in there, it looks almost as if it just skips the .sound folder (which is where my music albums are). For me the solution was to simply search for another music player. I tried a few, and finally I ran into an app called Meridian which allowed me to select which folders I want to use, so I use that for now.

By the way, you stated you also had a problem with multiboot sometimes not showing up when rebooting? I also had this issue, and noticed that if you slide your N900 open while rebooting, multiboot will always show up.

Hope that helps, cheers!

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

e-yes,ammyt,and everyone else who was supportive and helpful on this forum,thank you very much for helping us. NiTDroid11 is just awesome. it is much faster than gingerbread i previously had. Though i had to reflash my device due to few mess up with deleting the old android port, i am pretty happy it yielded the fruit.

Just one question at the end. Am i the only one who doesn't see facebook or twitter apps in NITDroid11?.

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

Market fix doesnt work anymore so you cant "see" the whole market.

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

on the first page it says "market fix doesnt work anymore". why not read the first page and see what is working and what isnt? :rolleyes: :rolleyes:

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

Hey I installed It but It has even less icons then 0.0.9 . It does not detects my WLAN and for that I can excuse it because I know my WLAN has some problem. Still I want to install some applications in it but where can I find File manager to load applications.

I tried to install Astro by the following method

sudo gainroot
mount /and to mmc
copy astro file to /and/system/app
umount /and
restart phone to NITDROID
but I still can not See any file manager. Please help

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

There are still some good file managers in the market. Search for 'file manager' and you will find a good file manger.

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

Guess it's time to use Applanet.net instead... :)

Re: [Release] Android Gingerbread 2.3.3 -- N11 "Vostok"
 

How do I install ASTRO file manager . I tried to Install using XTerm Emulator with install command but that didn't worked out quiet well either.