maemo.org - Talk - [Question] - Does the Smartreflex work in P.R. 1.3?

maemo.org - Talk (https://talk.maemo.org/index.php)

- Maemo 5 / Fremantle (https://talk.maemo.org/forumdisplay.php?f=40)

- - [Question] - Does the Smartreflex work in P.R. 1.3? (https://talk.maemo.org/showthread.php?t=73040)

Re: [Question] - Does the Smartreflex work in P.R. 1.3?

i actually tried enabling SR via qcpufreq and rebooted has soon has i enabled.... never tried since

Re: [Question] - Does the Smartreflex work in P.R. 1.3?

Quote:

Originally Posted by f2thak (Post 1006015)

apparently you should have VDD 1 and 2 both on, but if it works, I guess its fine

i'll test this now ;)

//edit

OMFG the battery life is incredible
how can this be?
only with two 1 in a config file oO

thats awesome

Only 300mAh for the whole day?
(GSM and Online)

thats more than awesome. tomorrow i make a hardcore test with music and online mode.

i love my N xD

<3 allways in love :D

Re: [Question] - Does the Smartreflex work in P.R. 1.3?

SUCCESS :D

Your profile settings seems to work Erazor. I just gonna try higher frequency at least 805...Now lets see how battery holds up :)

Re: [Question] - Does the Smartreflex work in P.R. 1.3?

Quote:

Originally Posted by HellFlyer (Post 1007069)

SUCCESS :D

Your profile settings seems to work Erazor. I just gonna try higher frequency at least 805...Now lets see how battery holds up :)

:D sounds great

my "hardcore" day starts now.

good luck 2 u :D

//edit:

ok Test-Day 1 over ^^

after 10h nonstop music+online+email usage the Battery gives up ^^
Hm
OKAY
looks nice and sounds good : )

tomorrow i test it without music.

stay tuned :D

//edit2:
Test Day 2 is over

with online+email+internet+sms and 2 reboots the Battery gives up after 12.5h

i think thats ok :)

compare it with a Netbook/Notebook ;)
the battery must be charged here also each day

//edit:

here is the profile again for the people who are interessted in my lifetime profile :D

Code:

# minimum frequency to use

MINFREQ=250

# maximum frequency to use

MAXFREQ=700

# list of frequency configurations: each "frequency:volt,dsprate"

FREQS="0:30,90 250:30,360 600:38,430 700:45,440"

SMARTREFLEX_VDD1=1

SMARTREFLEX_VDD2=1

GOVERNOR=ondemand

UP_THRESHOLD=70

SAMPLING_RATE=150000

IGNORE_NICE_LOAD=1

POWERSAVE_BIAS=0

based on the ideal profile.
but i modified it :)

i'm happy :)

Re: [Question] - Does the Smartreflex work in P.R. 1.3?

Quote:

Originally Posted by Erazor (Post 1007098)

Code:

# minimum frequency to use

MINFREQ=250

# maximum frequency to use

MAXFREQ=700

# list of frequency configurations: each "frequency:volt,dsprate"

FREQS="0:30,90 250:30,360 600:38,430 700:45,440"

SMARTREFLEX_VDD1=1

SMARTREFLEX_VDD2=1

GOVERNOR=ondemand

UP_THRESHOLD=70

SAMPLING_RATE=150000

IGNORE_NICE_LOAD=1

POWERSAVE_BIAS=0

based on the ideal profile.
but i modified it :)

i'm happy :)

overall, how fast is it? do u still feel its overclocked? and isnt 250 min a bit low? will 500 still be fine with smartreflex? and how did u manage to edit up_threshold?

Re: [Question] - Does the Smartreflex work in P.R. 1.3?

a little tutorial or help would be appreciated on enabling smartreflex other than in qcpufreq and editing some stuff other than frequency like up_threshold. :)

Re: [Question] - Does the Smartreflex work in P.R. 1.3?

how fast it is?

ahhhhh VERY FAST.
don't need to be faster for me :)
And i don't know why people overclock it to the max.....

the Tutorial? hmm okay let me help you a little ;)

1.forgot all the apps xD
2.get rootsh and leafpad

Code:

apt-get install rootsh

apt-get install leafpad

3. reboot your N
4. enter X-Term and type in root
5. enter the following command

Code:

leafpad /usr/share/kernel-power-settings/myprofie

write your name for "myprofile"

6.copy the code into it

Code:

# minimum frequency to use

MINFREQ=250

# maximum frequency to use

MAXFREQ=700

# list of frequency configurations: each "frequency:volt,dsprate"

FREQS="0:30,90 250:30,360 600:38,430 700:45,440"

# enables SmartReflex

SMARTREFLEX_VDD1=1

SMARTREFLEX_VDD2=1

# controls the cpu frequency

GOVERNOR=ondemand

# say the cpu change to a higher clockspeed when ** % are reached 

UP_THRESHOLD=70

# set the time where the cpu change to a higher clockspeed

SAMPLING_RATE=150000

# ignore quick usage

IGNORE_NICE_LOAD=1

POWERSAVE_BIAS=0

7.save it

8. type in

Code:

kernel-config load myprofile

9. test the settings

10. when no reboot are happen then you can set it to the default profile. so the profile starts everytime when you boot your N

Code:

kernel-config default myprofile

you have to do this as root ;)

ahm yeah

Have Fun @ testing

Re: [Question] - Does the Smartreflex work in P.R. 1.3?

For total max bro style battery life you may wish to consider limiting the device to 600MHz, you will notice the voltage jump from 600-700MHz is quite significant.

Code:

power=voltage^2*frequency

obviously how you are connected to the net also has a significant effect in battery.

i.e.

under-powered wifi>wifi>2G>3G

The other major pest is crumby software. Python+QML appz? forget it...hardware polling appz? forget it...

Re: [Question] - Does the Smartreflex work in P.R. 1.3?

Quote:

Originally Posted by Erazor (Post 1008684)

Code:

apt-get install rootsh

apt-get install leafpad

3. reboot your N
4. enter X-Term and type in root
5. enter the following command

Code:

leafpad /usr/share/kernel-power-settings/myprofie

write your name for "myprofile"

6.copy the code into it

Code:

# minimum frequency to use

MINFREQ=250

# maximum frequency to use

MAXFREQ=700

# list of frequency configurations: each "frequency:volt,dsprate"

FREQS="0:30,90 250:30,360 600:38,430 700:45,440"

# enables SmartReflex

SMARTREFLEX_VDD1=1

SMARTREFLEX_VDD2=1

# controls the cpu frequency

GOVERNOR=ondemand

# say the cpu change to a higher clockspeed when ** % are reached 

UP_THRESHOLD=70

# set the time where the cpu change to a higher clockspeed

SAMPLING_RATE=150000

# ignore quick usage

IGNORE_NICE_LOAD=1

POWERSAVE_BIAS=0

7.save it

8. type in

Code:

kernel-config load myprofile

9. test the settings

10. when no reboot are happen then you can set it to the default profile. so the profile starts everytime when you boot your N

Code:

kernel-config default myprofile

you have to do this as root ;)

ahm yeah

Have Fun @ testing

Ive got min and max @ 805
up threshold @ 75

have not had 1 single reboot, device is still fast and smooth..
profile based on ideal

Code:

MINFREQ=805

MAXFREQ=805

FREQS="0:25,90 805:48,430"

SMARTREFLEX_VDD1=1

SMARTREFLEX_VDD2=1

GOVERNOR=ondemand

IGNORE_NICE_LOAD=1

UP_THRESHOLD=75

SAMPLING_RATE=150000

POWERSAVE_BIAS=0

Re: [Question] - Does the Smartreflex work in P.R. 1.3?

hows the battery life?