Originally Posted by stooobs (Post 1136859)

i used 7% battery in 12hrs includin a 10minute phonecall and some browsing but nothing else gona uninstall 2.9 and put the testing 1 on, it annoys me having an update keep appearing lol

Originally Posted by karam (Post 1137095)

but today or tomorrow i will update it
and will add a function that removes lags when recieving a call :)
(answer , reject buttons will be smoother to press)
my bro noticed this recently

Originally Posted by stooobs (Post 1136859)

i used 7% battery in 12hrs includin a 10minute phonecall and some browsing but nothing else gona uninstall 2.9 and put the testing 1 on, it annoys me having an update keep appearing lol

Originally Posted by karam (Post 1138727)

hmm thanks for reporting
but for the latest stable batterypatch i can't seem to find any problem hat causes breaks transitions as algiz reported

would you please tell me what is the stale version with you ? (algiz) so i can analyze and see where is the problem ?

Originally Posted by romiiio (Post 1138680)

Hi karam thanks for your hardwork mate but lately i have noticing my n900 slowing down alot when using few different interent windows open and multitasking! My processor always runs at 600mhz whixh wasnt the case before even when a single internet window is open cpu runs at 600mhz all the time and slows the phone down and i struggle scrolling down the page etc. Im using latest speedpatch and latest non-kp batterypatch

Originally Posted by trisha02 (Post 1139121)

my N900 slowed down like hell too.so i removed batterypatch and speed patch.it dint solve the problem.so i reflashed it

Originally Posted by karam (Post 1141443)

well well you can't use batterypatch and Cpu power controle together
only 1 of them

the differences :
Cpu power controle : is a power controle -_- you configure your profile and try pre configured profiles and other configurable settings
and there are some of batterypatch features in it
ex : vfs trick and cpu_sleep (if) script

batterypatch : aims to give the batterylife to N900
compatible with HD recording and can easily controle max/min freq (by editing /usr/share/kernel-power/overclock)and no need to use many profiles ... and it solves some issues
ex: solves the lag sometimes caused when recieving call by setting minfreq to 720 when a call is recieved
and have more configs in dbus-scripts-settings
ex: if you locked your phone while the keyboard is opened and then closed and left the keyboard right away then after couple a sec N900 will send a dbus-signal ( as the system is not active) and will activate cpu_sleep
.. this feature is not included in cpu power controle

although might not explained enough about cpu power controle because i haven't tried it (only saw what it contains)

INSHORT : you cannot fully compare batterypatch and cpu power controle
because they are different from each other

Originally Posted by karam (Post 1012180)

HELLO Everybody
This Guide Has 4 Parts :
1: Speed Patch : To Speed Up N900
2: Battery Patch : To Have A Long Battery Life
3: Battery Patch Non KP : For non kernel-power users
4: Tweaks : To Make You Enjoy N900


Part 1: Speed Patch

INFO

A lot of you must have heard about the 200 lines to speed up linux while blackhat announced 4 lines to do that and it is called miracle patch
anyway neither of the available tutorials on internel are working on N900

BUT For Fortunately i was able to apply it to Maemo 5 on N900!!!!!

You will notice a lot of improvements in hildon-desktop
and basically every thing will be improved

CURRENT VERSION : 2.0

What Does It Do
The CFS (completely fair scheduler) in our phone's kernel manages the allocation of resources (cpu/mem) between tasks.
It was designed to cope with server-class machines such as web servers and databases, giving all tasks equal access to resources.
This means if a server is really busy, then all tasks on the machine slow down equally.
Desktop/mobile class machines shouldn't work the same way as servers though.
They have a human user who expects the machine to respond and give feedback within a certain time.
If a machine is slow to respond, the user loses some sense of control over the machine.
This patch addresses the problem by taking note of what the user is doing right now, and using that information to accelerate the current task, and decelerate other tasks on the system.
The user won't notice the background stuff going slower, they will just see their app working fast. The patch does this by creating multiple classes of task
-------------------------------------------
/dev/cgroup/cpu/tasks
/dev/cgroup/cpu/desktop/tasks
/dev/cgroup/cpu/applications/tasks
/dev/cgroup/cpu/applications/standby/tasks
/dev/cgroup/cpu/applications/launcher/tasks
-------------------------------------------
If you look at the contents of these files, you'll see the process IDs of all the tasks in each class. CPU and memory are shared out to these classes using the files "cpu.shares", and "memory_limit_in_bytes".
When lots of tasks are demanding CPU/memory at once, the resources are handed out to tasks depending on their share.
This is why your phone feels nicer when you have this patch - the kernel automatically classifies tasks and devotes more of cpu/mem to the "application" and "desktop" class tasks, and much less to other classes like "standby".


Installing Speed Patch

Then Reboot twice
------------------------------------------------------------
IMPORTANT
1-)If there was an error in xterm after speedpatch is installed and launched xterminal
that means speed patch was not applied

2-)Speed Patch may not be activated from the first 2 reboots
it may need up to 4 or 5 reboots
i still don't know why is this happening
but once it's activated it doesn't need any further reboots
to check if it was activated
read at the checking section below

3-)if you are having the xterminal problem and it disappear after xterminal is loaded then:
do this to fix it 4-)And if your N900 improperly shut down because of an unexpected reboot
or because of a battery drain
then speedpatch will now be activated on the next reboot
to solve just reboot once
------------------------------------------------------------

Uninstalling Speed Patch
To remove the patch:

Then Reboot

------------------------------------------------------


BENCHMARK
The simplest way to see how the patch effect
is to open browser windows about 8 before applying the patch
and 8 after applying the patch
you will notice a huge improvement

---------------------------------------------------------------------------------


Part2 : BATTERY PATCH

INFO

This Tweak Improves The Battery Life of Our N900
For Standby And Continues Time Of Usage

CURRENT VERSION IS: 3.5
Compatible with all KP versions

When device is locked : or system is inactive or the brightness is off (except when having a call)

1-) vfs_cache_pressure goes to 10 : it's proven that doing this saves a lot of battery on standby
2-) change to underclock profile : vdd1 vdd2 enabled, (but with KPv48=> only vdd1 enabled) powersave_bias=20 and the stock voltages to avoid reboots
3-) renice 1 some processes

When the device is unlocked or the brightness is on

1-) vfs_cache_pressure goes back to 100
2-) overclock profile is loaded : vdd1 vdd2 enabled, conservative mode and powersave_bias=20
3-) renice 0 the previous processes

Extra Feature

Someone may say "i don't want my N900 to use underclock profile and pause some processes when i lock the screen because i'm downloading a large application to install it"

Solution is :
Open the keyboard, lock the screen and leave the keyboard opened
in that case batterypatch is temporary disabled
so locking the screen will activate it's features


Dependencies

dbus-scripts, kernel-power, kernel-power-flasher, kernelpower-settings

Installing Battery Patch

Uninstalling Battery Patch

------------------------------------

Part3 : BATTERY PATCH Non kernel-power users

INFO

This version is for people who doesn't use kernel-power
This Tweak Improves The Battery Life of Our N900
ONLY ON STANDBY
UNLIKE THE Battery Patch Full version

CURRENT VERSION IS: 3.0

When device is locked : or system is inactive

1-) vfs_cache_pressure goes to 10 : it's proven that doing this saves a lot of battery on standby

When the device is unlocked or the brightness is on

1-) vfs_cache_pressure goes back to 100

Dependencies

dbus-scripts

Installing Battery Patch Non kernel-power users

Uninstalling Battery Patch Non kernel-power users

----------------------------------------------------------------------

CHECKING

1. To check if Speedpatch was installed Correctly:

Open an xterm window
if no errors appeared that means speedpatch is applied

or
You Should see some files
-------------------
2.To check if Battery Patch was applied :

Then lock the phone and unlock it
Then
you should see 100
If so then the patch is applied

FAQS

1-)
Q-) I cannot change max frequency with qcpu or any other gui cpu freq changer!!!!

A-) To change the max cpu frequency you need to edit the max freq at :
/usr/share/kernel-power-settings/overclock with any text editor ex:
and then change the maxfreq to anything you want down than save and quit
IMPORTANT !!! IF YOU HAVE AN UNSTABLE N900
IT'S RECOMMENDED TO DISABLE VDD1 ... CHANGE IT TO 0
IF YOU WANT TO OVERCLOCK MORE THAN 805

2-)
Q-) My N900 shows low battery and when i lock the phone and leave it idle ..the battery bar will rise up again

A-)N900 will recalculate the remaining battery charge according to the way using it
.. if you are using N900 in a heavy way then battery bar will show less than leaving N900 on idle mode

----------------------------------------------------------------------



PART3 : TWEAKS

1-) You may try hardware accelerator wich will make hildon-desktop smoother
BUT it is known to be unstable so if it caused any hildon-dekstop crashs or reboots simply disable it

To enable it :
use any text editor to edit /etc/powervr.d/hildon-desktop.ini and change WSEGL_UseHWSync=0 to WSEGL_UseHWSync=1
so :

and change

To

Believe me hildon will be much smoother but as i said before if any reboots occurred then disable it by changing


To


IMPORTANT: if you was very unlucky with HWsync you may have to reflash Your N900
because it may cause a reboot loop
otherwise it is stable to use on 80% of N900s
------------------------------------------------------


2-) And you may also want swappolube and it's proposed values
to install it

once installed launch it then press on PROPOSED button then APPLY then STORE

------------------------------------------------------


3-) And you may also want tracker-cfg and lowmemory mode (will make tracker use less CPU and Memory wich will improve the speed a bit)
install it :

once installed launch it and choose lowmemorymode
Then save and exit

------------------------------------------------------


4-) And ApMeFo app wich organizes folders your menu(try to reduce the shortcuts by putting them in folders) this will improve transitions

to install:

------------------------------------------------------


5-) And installing CSSU with it's nice modified hildon-*
for installing it

http://wiki.maemo.org/Community_SSU

------------------------------------------------------

6-)Also kernel-power is recommended

to install it :

----------------------------------------------------------------------


------------------------------------------------------
IF YOU DID ALL THE INSTRUCTIONS CORRECTLY

You should have a really fast and smooth N900

BTW The Tweaks Are All optional But For the best result Apply Them All


Enjoy

Thanks for :
thingonaspring for helping me with speedpatch
vi_ for helping me with batterypatch
------------------------------------------

Full Removal script for speedpatch and batterypatch for people who messed up due the many updates
from attachments
Download and move to /home/user then execute
But remember to reboot after removing before reinstalling the patches

Originally Posted by sandymahrok (Post 1143012)

i have a problem with overloking my device i can normaly change my cpu frequency but after sometime it automaitcaly changes it to 600mhz or 805 i dont no why i tried all apps for cpu frequency change and all having same problrm so plz solve this problem and provide best solution..thanks

Originally Posted by sandymahrok (Post 1143473)

i got a problemm with my xterm after install speedpatch i always get an error when i start xterm it shows (-sh: /home/user/.bashrc: line 5: cannot create /dev/cgroup/cpu/user/22470/​tasks: nonexistent directory
-sh: /home/user/.bashrc: line 5: cannot create /dev/cgroup/cpu/user/22470/​notify_on_release: nonexistent directory) it means speed patch is not installed but why every time this message come even i uninstall speedpatch plz help me to solve this.