![]() |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Quote:
Also glad to see you made it through the turmoil and are active again here. I wish you well and I'm sure I will have time in the not to distant future to catch up and see where things are. :) |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
since
Code:
apt-get purge batterypatch-non-kpHTML Code:
http://repository.maemo.org/extras-devel/pool/fremantle/free/b/batterypatch/batterypatch_8.0_armel.deb 14.04.2012 18:52 8108 batterypatch_8.1_armel.deb 18.04.2012 18:24 8190 whitch one is for non power kernel users? thanks! P.S.this battery patch realy works ??because after i installed speedpatch and swapolube my battery discharge much faster than before(i am a non power kernel user;non OC user.etc..)i will try with battery patch and if i see no changes i will unninstal firt swapolube( see what will happens) and if no result unninstal speedpatch and see what will happens,and write here the results. |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
How can I set the avoided frequencies witch the Battery Patch applied? Every time I change </sys/devices/system/cpu/cpu0/cpufreq/ondemand/avoid_frequencies> it gets overwritten when the profile is changed.:confused:
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
hey Karam, are you working on the black screen issue in speedpacth? going to nitdroid and coming back to maemo needs 3 restarts to make maemo load. 1st one it turn off without booting, 2nd time it boots with black screen, 3rd time it boots normal.
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
@rslick
Code:
apt-get install batterypatch-non-kp@Fellfrosch you must edit /usr/share/kernel-power-settings/overclock and remove the freqs you don't want @ahmadamaj i'm really sorry, you'll have to wait a bit more time because i have my bakaloria test in 41 days and am really busy with studying right now :( |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Hi Karam,
thanx for your answer. But my problem is a different: When th underclocking profile is active there are two frequencies which are avoided: 125 and 250. I want my N900 to use the the 250 MHz. |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
this can't be
i have checked underclock . 250 is existed btw you need to manually load it: Code:
root |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Unfortunatly it is avoided:
BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash) Enter 'help' for a list of built-in commands. /home/user # kernel-config load underclock loading /usr/share/kernel-power-settings/underclock successfully loaded. /home/user # kernel-config show current kernel configuration: current frequency: 500 supported frequencies: 125 250 500 550 600 720 805 850 900 950 1000 1100 1150 min. frequency: 250 max. frequency: 500 avoid frequencies: 125 250 active frequencies: 500:38,360 550:38,400 600:45,430 720:48,430 805:54,500 850:54,520 900:54,600 950:54,600 1000:60,600 1100:72,600 1150:72,600 SmartReflex VDD1=1, VDD2=1 governor ondemand: ignore nice load= 1, up threshold= 95, sampling rate= 300000, powersave bias= 20 /home/user # The Same with the profile overclock. But there it is OK for me. |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Quote:
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Quote:
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
reinstall batterybatch
apt-get install --reinstall batterypatch |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Quote:
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
@Fellfrosch
seems that your overclock profile was the same as your underclock did you messed up with something before ? ex: coying overclock over underclock ? just to make sure nothing wrong in the update |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Hi Karam,
the profiles were definitive different. I checked the profiles three times. Even tried to copy my backuped old profiles over the newer once which I've modified manually. On the other hand i don't think that there is something wrong with your update. Otherwise the reinstallation wouldn't have fixed the problem. I guess there went something wrong while the update. Maybe a file got corrupted or something like that. Thank You for your big efforts and that you are still supporting your patches. :) |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
plzz help me,
i am not using the linux kernel,i am using the non-kp....i install the h-e-n at mobile hotspot,but i found the fm radio is not working??i think fm module problem? then i install ''linux bfs'' in the HAM, i saw that the fm radio is working but the problem is the mirror app. or the front camera of the n900??and also the videocalling option in skype or goolgetalk not working????their is an error "error resource not found" plz help me i am not familiar in this phone i want only use the h-e-n app, plzz help me how can i run the mirror or frontcam ?????plz reply |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
hi all, after installing battery patch + speed patch , my phone is overheating when i charge the battery. anyone with same problem ?
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Hoe do I load your settings on startup? My n900 sometimes shows "An iunexpected reboot occured. your custom kernel settings were not loaded". How do I load them afterwards?
Cheers, blck |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
reboot will load kernel settings
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Quote:
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Quote:
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
For a long time, fairly recently, I was changing my settings for kernel-config and something was changing them back to what I had before.
The giveaway was that after I changed my settings to something like the following: MINFREQ=600 MAXFREQ=600 GOVERNOR=ONDEMAND and so on and I would set this as the DEFAULT setting After I rebooted, the max and min settings would have changed, and the GOVERNOR setting would be back to CONSERVATIVE. Now I KNEW that the CONSERVATIVE msetting was put there by the patches and CHANGED BACK TO THESE SETTINGS EVEN AFTER I SET THE DEFAULT NOT TO BE CONSERVATIVE GOVERNOR. This happened to me MANY times. This even happened after I UNINSTALLED the battery patch/speed patch combination. It is NOT happening to me now. I am positive that those settings were put back by something in the battery patch/speed patch programs. I didn't mention it online because no real harm was done. But I am making this statement now because the maker of the patch seems to be claiming that nothing like this ever happened to anyone. It happened to me, and I NEVER ONCE voluntarily made that CONSERVATIVE setting because I remembered a discussion by Titan and others in the original overclocking thread that concluded that the conservative setting was NOT HELPFUL. |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
@geneven
hmm well latest versions of batterypatch 8.0 =< are not using conservative anymore maybe those problem you are talking about used to happen with older versions tbh bp wasn't stable enough till version 7.5 however the newest ones are tested enough please recheck and reply as fast as possible but few points here you can't set the max and the mix to the same value it will load the min the one right before the max one ex : in your case 550 would be the min and of course you get conservative back again (older versions) because bp uses it's own kernel-config settings so editing them would be from /opt/batterypatch/profiles/overclock-new or overclock-old (if using an old kernel 48 >=) thanks ------------------- @woody from kp thread first thanks for your post woody Quote:
Quote:
even older version of batterypatch didn't inject it's speedpatch that does so Quote:
and i meant a test for removing stuff ;) Quote:
not batterypatch |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Quote:
Quote:
As for the test portion, I understand what you meant. But I don't think the onus should fall on the Kernel folks to develop a test to determine if your patches cleaned themselves up. If anything, that should be a goal you strive to meet as a project owner. As far at they are concerned, their test right now is "do/did you have BP/SP installed", and if so they're directed here to do a proper clean-up before further help is applied on their thread. To be fair, that attitude has developed because after removal most users haven't had to return to the KP thread for help, as the issue was resolved by removal. (There have been exceptions, and at least one actual kernel issue found because of side-effects, but they were in fact a tiny fraction of the cases.) |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks / NEW VERSION OF SPEEDPATCH(now uses syspart config, no more xterminal problem) TESTERS NEEDED
Hi karam,
I recently installed Kernel Power v50 and afterwards your Speed-Patch. (Until now I used only stock kernel and no speed patch.) Before and after installation I did some test with photo viewer, contacts and browser windows. I installed exactly as required incl. reboots, and the result is stunning. Although I could not believe it, your patch works very well. I read several postings claiming it just could not work on the single core OMAP chip of our N900, but I have to say: there is no doubt, multitasking and overall - it feels so much faster. In one word, it feels as if it had much more RAM inserted! I also looked into the subfolders of the cgroup folder, and found new integer-named files in user, but did not find new integer entries for other running apps. It remains mystical but it works! Quote:
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
if i install speedpatch and after few days of using if i remove it from app manager or terminal will it remove completely or some tweaks will still be there?
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
@rm53
thank you for your post :) it makes me feel that am not spending time on for the community for nothing @Mohammed Muid yes it will be completely removed but note that you MUST update to the latest versions and then remove them if you want because SP versions older than 4.0 are not getting removed completely (current latest is 4.0) BP versions less than 7.5 are not as well (current latest is 8.2) |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
HI Karam after upgrading to the latest speedpatch and batterypatch i am experiencing juttering specially while playing music! When im listening to music and browsing or multitasking with few apps the music stutters i wasnt getting this on the previous version!
Can you help please! |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Quote:
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
i dont know what is the matter with speedpatch. i installed the latest version running kp50. after i installed it i rebooted twice. then i used it for a day. suddenly while browsing my cell auto rebooted. but when it turned on no display showed up.my cell turned on but no display. there was a dark gray light on the screen. then i turned it off with the power button which proves that my cell was on. then i turned it on again. it worked for 30mins. suddnely it turned off aagain and same problem.auto reboot. this happened just after a day i installed speedpatch
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
"but few points here
you can't set the max and the mix to the same value it will load the min the one right before the max one ex : in your case 550 would be the min" In fact, you CAN set the max and the min to the same value. I know because I did it, and I haven't noticed any resulting problems. Furthermore, if you read the original overclocking thread, you will see that someone (I think it was jakiman) ran lots of tests with max and min set the same. |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
@geneven
is that so ? hmm well i believe you didn't understand what i said their won't be problems you will just have the min freq get set to the freq right before the max one if they are both same freq ex : min : 500 max : 500 then min 250 max : 500 got it ? else you can even read faqs at qcpu gui application @phamgia i advice you to install batterypatch and remove it after then in this case any older versions will be removed too ps : i have changed batterypatch working method so if you have a script version for example then remove the folder /opt/dbus-scripts and btw there is a version called batterypatch-for-unstable give it a try @Mohammed Muid speedpatch has got nothing to do with unexpected reboots something else must be causing it maybe updated a program ? maybe messed up with some settings ? else try to uninstall sp and check if the reboots are gone @romiiio those stutters.. well would you try to edit /opt/batterypatch/profiles/underclock-new and change the max to 600 let me know what happens with you |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
@Mohammed Muid
Have you updated to latest libxau6? Check this: http://talk.maemo.org/showthread.php?t=83939 :) EDIT: Oh sorry.. you have already did it..:o |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Quote:
@ karam uninstalled speedpatch and problem solved. now i remember that i previously had speedpatch installed. had to uninstall it cz i faced the same problem earlier |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
i tried to install the battery patch but it say it couldn't find the packages
i've installed bash i put the file in home/user/MyDocs. what did i miss here :confused: |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Batterypatch is good, but why batterypatch don't working on a bit more overclock than 805. I would like to set 500-900 with ideal profile voltage (it.s fully stable on my n900)
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
you can easily control bp
just read the FAQS part @1st post |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
1 Attachment(s)
Karam - Ok, I edit /opt/batterypatch/profiles/overclock-new and set max freq to 900 and after reboot n900 load my old profile (I set it before installing batterypatch). When I type in terminal: "echo 1000 >> /proc/sys/vm/vfs_cache_pressure" lock it and type "cat /proc/sys/vm/vfs_cache_pressure" - batterypatch is working, but max cpu freq is 805 again :/
EDIT: It's working :) I edit "/usr/share/kernel-power-settings/overclock" too, after reboot I have 500-900MHz clock with batterypatch. It's my testing config. Working fine, but not much tested under heavy load (this voltage is from ideal profile, I was tested it on 500-900 clock (with smartreflex) before and it was fully stable, but now dsp is higher). Any sugestions for improvments this config ? Quote:
I change "Samping_rate" to 150000 and "up_treshold" to 75 (like in "ideal" profile) - better performance for me, but I don't know how much is difference between this in battery life, but working faster on 150000 and 75. Battery life: I disconnet n900 from charger 11hrs ago (at 8.00 am). Now conky shows 50% of battery - wifi always connected to AP, some internet browsing, some music on headphones, 2calls and about 7hours kadu in backgroud. Thanks for batterypatch, it;s really good work, after set ideal profile voltages and 500-900clock :). PS: Sorry for my english. |
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
installed batterypatch again and the phone hangs while I make phonecalls....is there any option to change in overclock-in call profile so that I can make it more stable?
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
@karam. when you will release a update for speedpatch to solve boot problem ? i.e booting from Nitdroid to Maemo stucks and shows only black screen until I manually turn it off and on it again.
|
Re: [ANNOUNCE] Speed Patch + Battery Patch + Tweaks --> Everything Needed To Have A Perfect N900
Hy to all.
For me the speed patch realy works. It has no placebo effect as some users says. My N900 was verry slow before de patch even though it was set to min 900 mgh and maxim 900 mgh :) thanks again man :). |
| All times are GMT. The time now is 13:20. |
vBulletin® Version 3.8.8