Re: [Announce] Yate SIP Server (Use GV via SIP)
 

Is the sip experience better with on-device yate?

PS: see my signature for the bug

Re: [Announce] Yate SIP Server (Use GV via SIP)
 

I suffered from that same issue.

Since I tried locking the frequency of the n900 during calls, I really haven't had any problems. I noticed that the default kernel does this, but the power kernel does not.

Re: [Announce] Yate SIP Server (Use GV via SIP)
 

It works for outgoing calls, but incoming calls come over GSM. How do I get incoming calls over yate?

Re: [Announce] Yate SIP Server (Use GV via SIP)
 

You need to set incoming google voice calls to be forwarded to google chat instead of your cell phone number. You should be able to do that here.

Re: [Announce] Yate SIP Server (Use GV via SIP)
 

I tried that, and my phone just didn't ring. I notice in terminal I have a lot of messages like
"<yrtp:WARN> Initial timeout in channel jingle/7 wrapper [0x176f80]
<yrtp:WARN> Initial timeout in channel sip/8 wrapper [0x41001c78]"
Might this be related?

Re: [Announce] Yate SIP Server (Use GV via SIP)
 

About half way down this page it looks like the person is suffering from a similar issue.

Also, make sure you disable and then re-enable the sip account on the n900 after you restart yate (so it re-registers).

Otherwise I am going to need a more complete log and / or you may have to try posting to the yate mailing list.

Re: [Announce] Yate SIP Server (Use GV via SIP)
 

Overclocking solved the choppiness totally.

BTW, as you have mentioned the idle cpu usage is kinda high , like 30% @ 250MHz, did you find any solution for that?.

Asterisks idles like 2% @ 250Mhz IIRC,

asterisk 1.8 support GV support, but unfortunately only asterisk 1.6 available in repositories for N900

Re: [Announce] Yate SIP Server (Use GV via SIP)
 

I never did find a solution for that. You can try changing which modules are loaded in yate.conf, but I had trouble figuring out which modules are needed.

Re: [Announce] Yate SIP Server (Use GV via SIP)
 

excellent! worked fine here. call went through. but i am getting different warnings in terminal. for example
Yate engine is initialized and starting up on Nokia-N900
<openssl:WARN> Certificate verify error 20: UNABLE_TO_GET_ISSUER_CERT_LOCALLY [0xa70d8]

<yrtp:WARN> Initial timeout in channel sip/2 wrapper [0x41002758]
<yrtp:WARN> Initial timeout in channel jingle/2 wrapper [0x1733a8]
<WARN> RTP received SEQ 358 while current is 359 [0x1734c0]

and also following warning during initialisation of yate

<WARN> Failed to save config file '/usr/etc/yate/snmp_data.conf' (13: Permission denied)
<snmpagent:WARN> Could not bind SNMP UDP Listener, error 13 Permission denied

but calls are getting through with voice on both sides. will do some more testing tomorrow for cpu usage and call quality.

Re: [Announce] Yate SIP Server (Use GV via SIP)
 

Can Yate be used with the n810. I can't find where to get php5-cli???