maemo.org - Talk - [Announce] Cleven

maemo.org - Talk (https://talk.maemo.org/index.php)

- Applications (https://talk.maemo.org/forumdisplay.php?f=41)

- - [Announce] Cleven - an aircrack gui (https://talk.maemo.org/showthread.php?t=75428)

Re: [Announce] Cleven - an aircrack gui

"10b.if the data is not collected then go back to cleven menu (without closing the x-term) & press the authenticate button...another x-term will popup showing it try to authenticate with the AP....it will show successfully authenticate or not...
10c.if successfully authenticate the x-term will not autoclose...if it fails then x-term will closed automatic...
10d.at this point go back to cleven main menu & press the inject button...another x-term will appears show it try to inject the AP....

i will continues if you have understand the step above..."

next step plzz.data is not collecting

Re: [Announce] Cleven - an aircrack gui

plz can anyone help me to proceed further when no data is collected?

Re: [Announce] Cleven - an aircrack gui

please anyone help me to proceed further.when data is collected i could crack ap. but what happens when data is not recieving but ap is active?

Re: [Announce] Cleven - an aircrack gui

Quote:

Originally Posted by trisha02 (Post 1084404)

please anyone help me to proceed further.when data is collected i could crack ap. but what happens when data is not recieving but ap is active?

ok how do you know the AP is active????
for me the only way to know it at x-term capture windows....looks at the AP....does any other clients connected with that AP??? if it does then the AP is active....
remember any AP is consider active when there is clients connected to it....

Re: [Announce] Cleven - an aircrack gui

yes that i know. i know it because i when testing it.my friend was able to connect it.and i cudnt fetch the data to crack the ap.i knew the password.i just wantd to test it.

10b.if the data is not collected then go back to cleven menu (without closing the x-term) & press the authenticate button...another x-term will popup showing it try to authenticate with the AP....it will show successfully authenticate or not...
10c.if successfully authenticate the x-term will not autoclose...if it fails then x-term will closed automatic...
10d.at this point go back to cleven main menu & press the inject button...another x-term will appears show it try to inject the AP....

i did it upto this.succesffuly happened. whats next. dat i want to know.

Re: [Announce] Cleven - an aircrack gui

Quote:

Originally Posted by trisha02 (Post 1084573)

i believe i already show you the next step here....
http://talk.maemo.org/showpost.php?p...&postcount=154

Re: [Announce] Cleven - an aircrack gui

Quote:

Originally Posted by pusak gaoq (Post 1084678)

i believe i already show you the next step here....
http://talk.maemo.org/showpost.php?p...&postcount=154

no no no. this was after i collected a minimum data. u mentioned-"ok looks likes you have a minimum data collected...
now you can closed x-term authenticate windows & go back to cleven main menu...."

but my data got collected upto 3.for this what shold be done next?the link u mentioned was for the further steps after my data got collected upto 37k

Re: [Announce] Cleven - an aircrack gui

can anyone please comment on what to do when data is not collecting at all but fetching beacons. and the AP is active.

Re: [Announce] Cleven - an aircrack gui

trisa! ffs could you please stop acting like a child?

I've asked politely to keep the thread relevant to the application - for questions about aircrack and cracking in general go elsewhere..

Please also delete you previous messages where you ask the same thing 10 times in a row - they don't do you any favour and most importantly they piss me off.

Re: [Announce] Cleven - an aircrack gui

Quote:

Originally Posted by pusak gaoq (Post 1073559)

follow these step....

1.open cleven
2.at loading driver press
a.loading injection driver
b.enable monitor mode
3.then press the status bar to get to cleven main menu
4. at cleven main menu press the scan button to search any WEP & WPA AP in range....the default search time is 10 seconds...
5.after 10 seconds search (a popup will show search complete) press WEP button if you want to cracks WEP AP or WPA button for WPA AP...
6.if you pick WEP then press the WEP button...you will see a few AP listed below...now choose any AP you wanna cracked (highlighten)
7.then press the capture button below the AP list.....
8. a x-term will popup to show the capture to that AP....look carefully at the data...if the data keep getting collected then just waits until the data is at 30k-50k....this show that the AP is active...
9.now it the data is not collecting any then the AP is not active....
10.at this point you have to different way to do.....
10a.if the AP is active & the data is collected at 30k-50k then go back to cleven menu (closed the x-term) then press the cleven status bar & select decrypt captured...
10b.if the data is not collected then go back to cleven menu (without closing the x-term) & press the authenticate button...another x-term will popup showing it try to authenticate with the AP....it will show successfully authenticate or not...
10c.if successfully authenticate the x-term will not autoclose...if it fails then x-term will closed automatic...
10d.at this point go back to cleven main menu & press the inject button...another x-term will appears show it try to inject the AP....

i will continues if you have understand the step above...

Can you please do the similar tutorial but for the WPA network instead. Thanks a lot in advance.