maemo.org - Talk - [Announce] Cleven

maemo.org - Talk (https://talk.maemo.org/index.php)

- Applications (https://talk.maemo.org/forumdisplay.php?f=41)

- - [Announce] Cleven - an aircrack gui (https://talk.maemo.org/showthread.php?t=75428)

Re: [Announce] Cleven - an aircrack gui

Quote:

Originally Posted by Saturn (Post 1090894)

Cannot confirm it.

One thing that might not be clear is that the "common" cannot check ".cap" and ".ivs" files together (that's a limitation of aircrack).

Therefore, if you have 20 .cap files and 1 .ivs file from an AP and you select the ivs file + common, you basically select the ivs only.

Could this be the "bug" you see?

Negative. I've just checked it, and all files are .ivs. Also, I managed to capture error aircrack-ng is throwing at me, when I try all common:

Code:

Opening /home/user/.cleven/capturedData/WEP/name_of_ap*.cap

open failed: No such file or directory

If I try any of .ivs without "all common" everything works (but only for selected .ivs file, obviously)

Also, huge thanks for adding broadcast deauth!

Quote:

Originally Posted by szopin

Just download wifite.py (http://code.google.com/p/wifite/) and run it. It has 4 attack options, 4th one being the clientless. I also could not find too much about it, and sadly have no python skills to look through the code.
EDIT: it's -p 0841, my mistake

Thanks szopin, I didn't know that method. I hope it will make it's way to Cleven.

/Estel

Re: [Announce] Cleven - an aircrack gui

Quote:

Originally Posted by Estel (Post 1091388)

Negative. I've just checked it, and all files are .ivs. Also, I managed to capture error aircrack-ng is throwing at me, when I try all common:

Code:

Opening /home/user/.cleven/capturedData/WEP/name_of_ap*.cap

open failed: No such file or directory

If I try any of .ivs without "all common" everything works (but only for selected .ivs file, obviously)

Could it be the name of the AP has some special character? to be more specific a "."?

Not sure yet but I have a suspicion on what could go wrong.

If you don't mind PM me with the exact AP name..

Re: [Announce] Cleven - an aircrack gui

can you make a harmattan icon of it?

Re: [Announce] Cleven - an aircrack gui

*redacted by mistake...*

Re: [Announce] Cleven - an aircrack gui

You have to use MAC registered with AP.

Re: [Announce] Cleven - an aircrack gui

Quote:

Originally Posted by Estel (Post 1091847)

You have to use MAC registered with AP.

Omg, MAC-Filtering? That's all that it means? Wow, thank you very much!!! I finally have a new solution to try out :D

Re: [Announce] Cleven - an aircrack gui

Hmmm... I used one of the MAC registered with the AP, and the authentication was succesful for the first 4 or 5 tries, but then it started rejecting me, I think...

Code:

13:59:18  Sending Authentication Request (Open System) (ACK)

13:59:18  Authentication successful

13:59:18  Sending Association Request (ACK)

13:59:18  Got a deauthentication packet!

And after a few of those, it went back to Association Denied (Code 18)... Any more advise at this point would be greatly appreciated... Could it be some form of manual "counter-attack"...? :|

Re: [Announce] Cleven - an aircrack gui

You flooded the AP with reply-inducing forged packets by any chance? This is their defense. And worst part is... the MAC you spoofed might learn about the unsuccessfull attack, good luck with wpa cracking

Re: [Announce] Cleven - an aircrack gui

Not sure if this is a bug for aps with space in cleven, works fine with fAircrack:

00:01:16 Waiting for beacon frame (BSSID: xx:xx:xx:xx:xx:xx) on channel 10
For the given BSSID "xx:xx:xx:xx:xx:xx", there is an ESSID mismatch!
Found ESSID "Xxx Xxx" vs. specified ESSID "Xxx"
Using the given one, double check it to be sure its correct!

00:01:16 Sending Authentication Request (Open System) [ACK]
00:01:16 Authentication successful
00:01:16 Sending Association Request [ACK]
00:01:16 Denied (code 12), wrong ESSID or WPA ?

00:01:19 Sending Authentication Request (Open System) [ACK]
00:01:19 Authentication successful
00:01:19 Sending Association Request [ACK]
00:01:19 Denied (code 12), wrong ESSID or WPA ?

Edit: same ap same settings no space worked perfect

Re: [Announce] Cleven - an aircrack gui

[FIXED! See below]

Quick (possible) bug report:

It looks like the version from extras-devel (1.12-1) is not correct. It says "Cleven 1.10" at the top, and (for instance) does not recognize .ivs files in the "Decrypt capture" screen.

I've downloaded the clevenMain.py file from the source and used it instead of the clevenMain.pyc file, and it works well (albeit it feels slower, as expected).

Autobuilder mixup, maybe?

===
I found the issue. It turns out that I had installed 1.10 from Extras first, and when I upgraded to 1.12-1 from Extras-devel, the .pyc files were never deleted. Interesting quirk I was not expecting...

No problems with Cleven, then. :)