Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 

I've noticed that my contacts birthdays don't show up in the calendar. They do on the N900...

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 

Yes, this is a limitation added in a sales release (I believe (wait, no. I hope ;) ) we will fix it in the update). Contacts sync can be enabled only for a one MfE account at the same time.
Noted, will check this issue.

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 

Some logging information about red arrow issue:

ACTIVESYNC.LOG
[1878] Oct 17 10:20:08 [Debug] Network : QtSslSupportPrivate: ssl error "The issuer certificate of a locally looked up certificate could not be found" : "The issuer certificate of a locally looked up certificate could not be found"
[1878] Oct 17 10:20:08 [Debug] Network : QtSslSupportPrivate: server certificate "nameofcompany-SSE010" has been already accepted by user
[1878] Oct 17 10:20:08 [Debug] Network : QtSslSupportPrivate: ssl error "The root CA certificate is not trusted for this purpose" : "The root CA certificate is not trusted for this purpose"

[1878] Oct 17 10:48:23 [Error] Transfer 4594992 : finished with unknown status

[1878] Oct 17 10:51:42 [Error] QtSslSupportPrivate: ssl error "The issuer certificate of a locally looked up certificate could not be found" : "The issuer certificate of a locally looked up certificate could not be found"
[1878] Oct 17 10:51:42 [Error] Certificate info:
[1878] Oct 17 10:51:42 [Error] Subject: O= "" CN= "nameofcompany-SSE010" L= "" OU= "" C= "" ST= ""
[1878] Oct 17 10:51:42 [Error] Issuer: O= "nameofcompany" CN= "nameofcompanyROOTCA" L= "" OU= "" C= "com" ST= ""
[1878] Oct 17 10:51:42 [Error] Valid: from "Wed Jun 23 12:32:15 2010" to "Tue Jun 23 12:42:15 2015"
[1878] Oct 17 10:51:42 [Error] Serial: 61:32:8e:2c:00:00:00:00:00:0a
[1878] Oct 17 10:51:42 [Error] Version: 3
[1878] Oct 17 10:51:43 [Debug] Network : User acceptance result for certificate "nameofcompany-SSE010" = 0
[1878] Oct 17 10:51:43 [Error] QtSslSupportPrivate: server certificate "nameofcompany-SSE010" has been accepted by user
[1878] Oct 17 10:51:43 [Debug] Network : CertificateUserChoiceResetter: user choice for certificate "nameofcompany-SSE010" will be reset in 86400 seconds
[1878] Oct 17 10:51:43 [Debug] Network : QtSslSupportPrivate: ssl error "The root CA certificate is not trusted for this purpose" : "The root CA certificate is not trusted for this purpose"

FENIX.LOG
[1619] Oct 17 10:48:21 [Warning] X Error: BadShmSeg (invalid shared segment parameter) 135
Extension: 135 (MIT-SHM)
Minor opcode: 2 (X_ShmDetach)
Resource id: 0x280006a
[1619] Oct 17 10:48:54 [Debug] Messaging : Looking for account by id: 8
[1619] Oct 17 10:48:54 [Debug] Messaging : Load custom fields
[1619] Oct 17 10:48:54 [Debug] Messaging : Custom Field: "pushEnabled" = "0"
[1619] Oct 17 10:48:54 [Debug] Messaging : Custom Field: "pendingDraftsWarning" = "true"
[1619] Oct 17 10:48:54 [Debug] Messaging : Custom Field: "showMoreMails" = "false"
[1619] Oct 17 10:48:54 [Debug] Fenix : static void FNotifier::showMessage(FNotifier::Level, FNotifier::Operation, const QMailAccountId&, const QMailServiceAction::Status&) accountId: 0 errorCode: 1037 folderId: 0 messageId: 0 text: "Unable to use account due to invalid configuration."
[1619] Oct 17 10:48:54 [Debug] Messaging : Looking for account by id: 8
[1619] Oct 17 10:48:54 [Warning] MSceneWindow: Construct and show MWindow before showing a scene window
[1619] Oct 17 10:48:54 [Warning] void FServiceActionManager::onActionActivityChanged(QMa ilServiceAction::Activity) Action finished 8 "Unable to use account due to invalid configuration." error: 1037 store error: 0
[2418] Oct 17 10:48:57 [Debug] Fenix : int main(int, char**) Try to load plugin
[2418] Oct 17 10:48:57 [Debug] Fenix : QString getPluginFileName(int, char**) Considering argument "-prestart"
[2418] Oct 17 10:48:57 [Debug] Fenix : void loadFenixUIPlugin(const QString&) Explicitly set plugin file name ""
[2418] Oct 17 10:48:57 [Debug] Fenix : Trying to load "/usr/lib/fenixplugin/libfenixmeegotouch.so" as plugin...
[2418] Oct 17 10:48:57 [Debug] Fenix : Load succes
[2418] Oct 17 10:48:57 [Debug] Fenix : Trying to cast plugin to FenixImplementation interface
[2418] Oct 17 10:48:57 [Debug] Fenix : Cast success
[2418] Oct 17 10:48:57 [Debug] MComponentData: "Testability plugin /usr/lib/qt4/plugins/testability/libtestability.so load failed with error: The shared library was not found."

MESSAGESERVER.LOG
[1345] Oct 17 10:48:54 [Debug] Messaging : MfeService::stopWaiting( 302 )
[1345] Oct 17 10:48:54 [Debug] Messaging : QMailServiceAction::Status::ErrorCode( 302 ) is 1037
[1345] Oct 17 10:48:54 [Debug] Messaging : QMailServiceAction::Status::ErrorCode( 302 ) is 1037
[1345] Oct 17 10:48:54 [Debug] Messaging : Action Completed signal is emited
[1345] Oct 17 10:48:54 [Debug] ../../../lib/SignOn/identityimpl.cpp 105 updateState Updating state: NeedsRegistration
[1345] Oct 17 10:48:54 [Debug] Messaging : exporting updates
[1345] Oct 17 10:48:54 [Debug] Messaging : Retrieving all for AccountId= 8 ...
[1345] Oct 17 10:48:54 [Debug] Messaging : Now 1318837734860 last sync completed at 1318836461311 diff = 1273549
[1345] Oct 17 10:48:54 [Debug] Messaging : MfeService::startWaiting()
[1345] Oct 17 10:48:54 [Debug] Messaging : start waiting for the signal
[1345] Oct 17 10:48:54 [Debug] Messaging : Request AsDaemonOperationRequest(0x1608e0) has been added into requests queue
[1345] Oct 17 10:48:54 [Debug] Messaging : result = 10 for AccountId= 8
[1345] Oct 17 10:48:55 [Debug] Messaging : Synchronize signal received for the account 8
[1345] Oct 17 10:48:55 [Debug] Messaging : request completed signal received code 302 for Account 8 Request 10
[1345] Oct 17 10:48:55 [Debug] Messaging : MfeService::stopWaiting( 302 )
[1345] Oct 17 10:48:55 [Debug] Messaging : QMailServiceAction::Status::ErrorCode( 302 ) is 1037
[1345] Oct 17 10:48:55 [Debug] Messaging : QMailServiceAction::Status::ErrorCode( 302 ) is 1037
[1345] Oct 17 10:48:55 [Debug] Messaging : Action Completed signal is emited
[1345] Oct 17 10:48:55 [Debug] Messaging : QMailServiceAction::Status::ErrorCode( 302 ) is 1037

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 

It's looks quite familiar to me, so I believe this is an issue that should be fixed in the update.

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 

Ok. Then I'll wait for the update.

Thanks,
nibbe

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 

Hi! It's the same over here. Our IT dept. turned on the Exchange option for "ignore client certificate authentication" and MfE is now working fine. I personally (meaning: our IT dept.) can live with this solution but there's definitely something in the MfE client...

Another request that I have: What I missed the most in MfE Client for N900 was the feature that was present on the E90: you could create private appointments in the phone's calendar and sync them to Exchange. Support for private appointments was dropped in N900 and it seems to be missing from N9 as well! Bummer.

Other than that, MfE on N9 is sooo much nicer than on N900...

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 

Hi I'm struggling to get my MFE configured. I'm using a 64Gb unlocked retail N9.

Originally I had a problem with the certificates, and I installed the whole tree from server to CA, using the Settings->Security-Certificates menu item. Now I can manually verify the server using acmcli thus:

acmcli -T common-ca -t ssl-ca -t ssl-user -v owa.ajilon.com.au:443
fa0395361a464c90b9f5dfe079fb86f5a53b1648 owa.ajilon.com.au
trust chain(3):
d2c4b0d291d44c1171b361cb3da1fedda86ad4e3 Go Daddy Class 2 Certification Authority/The Go Daddy Group, Inc./US
+->fdac6132936c45d6e2ee855f9abae7769968cce7 Go Daddy Secure Certification Authority
+->fa0395361a464c90b9f5dfe079fb86f5a53b1648 owa.ajilon.com.au
Verified OK

NOTE: I need to specify -t ssl-user, but not -t ssl-ca as the Top CA is already pre-installed in common-ca.

When I try to configure MFE, I still get a "Connection to server failed" error messages.

I have enabled logging as per your advice, however this is never getting to the log files. They just show the normal traffic for my other accounts - One gmail account, and an IMAP account.


RM696-34-1_PR_005:/home/user/MyDocs# date
Mon Oct 17 22:39:06 WST 2011
RM696-34-1_PR_005:/home/user/MyDocs# ls -l *.log
-rw-r--r-- 1 user root 371 Oct 17 22:13 activesync.log
-rw-r--r-- 1 user root 7612 Oct 17 22:12 fenix.log
-rw-r--r-- 1 user root 45966 Oct 17 22:14 messageserver.log
-rw-r--r-- 1 user root 25262 Oct 17 22:14 msgindexer.log


As you can see, nothing has been logged since 22:14, which is just shortly after my reboot. There is no reference to the MFE traffic in there, as the account has not been created as I always fail during the setup phase.

Any ideas ?

I am connecting to an Exchange 2003 server, and all my colleagues with Android/iOS can connect to the same server.

When I try to connect to the Web Mail account https://.../exchange, the browser warns me twice that it cannot connect securely, but on the third attempt it lets me in, and does establish an SSL session.

I suspect that the browser/mfe are not honouring certs held in the ssl-user domain.

Thanks,

Euan.

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 

This would be a big problem, if I buy N9 and cant connect to my server. How the hell does iphone do it without a hitch?

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 

I am having no problems with the mail for exchange client, it's ok. I am very disappointed that there's no flagging messages though, that's a real misstep for me on MfE, it means I won't be using this device for work - I get loads of mail and it's a necessity for me.

Any work on if it will be implemented?

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 

Simple "Don't know" is the response. We have done MfE part. If in order MfE to work you need Afaria client to be working on N9, thsi is the question to Afaria (Sybase?) colleagues.

And as not being marketing dude, I don't have any idea about this client.