maemo.org - Talk - N9/N950 Email/Mail for Exchange

maemo.org - Talk (https://talk.maemo.org/index.php)

- MeeGo / Harmattan (https://talk.maemo.org/forumdisplay.php?f=45)

- - N9/N950 Email/Mail for Exchange - Get help & give feedback here (https://talk.maemo.org/showthread.php?t=78480)

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here

Quote:

Originally Posted by MortenS (Post 1138391)

I could enter pin-codes as much as I wanted - from 1 digit up to 30 digits I think.

Did you try your Nokia account PW?

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here

Quote:

Originally Posted by Arpa (Post 1139477)

Did you try your Nokia account PW?

Its only possible to enter numbers when this lock occurs, so that was never an option... See this thread http://talk.maemo.org/showthread.php?t=80821

MfE problem; localhost added as CC

Hallo everyone!

I posted this thread previoulsy in the wrong section. Sorry for reposting it here.

I have a N9 (PR1.1 20.2011.40-4.480.2_PR_480). I have added an MfE account which works without any problem (but one).

The problem I have is, that a "@localhost" CC is added to every email I send out. Other clients of my Debian MTA have no problem whatsoever. The log file of the MTA indicates that it already recieves the localhost CC. Therefore I believe it is a N9 problem.

Has anyone experienced the same problem, or even better, knows how to fix it?

Thanx and cheers

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here

*BUMP* @Sergey

For all posts since the 14th of Dec, beginning page 39...
One of them may have been addressed already on page 40 (#395).

It's been quite a while since we've heard anything, perhaps you're on holidays now??
If you are season well wishes, thanks for your hard work & attentiveness for so many mths.
Enjoy your break, & come back fresh & ready to knock-over all the outstanding posts!

All the best. :)

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here

Quote:

Originally Posted by Ckris (Post 1137040)

Hi,
didn't find this discussed in the thread so I am posting my issue:
I have MfE configured with our company Exchange server.
When calendar entry is created on phone, invited contact(s) receive only plain email, not proper Outlook invite.

However, when I modify event previously created on PC on N9, changed invite is sent out properly.

Any advice?

I found workaround, if event created on N9 is updated later in the N9 calendar and saved, update is then sent out correctly as Outlook calendar event/invite.

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here

Quote:

Originally Posted by Ckris (Post 1140929)

I found workaround, if event created on N9 is updated later in the N9 calendar and saved, update is then sent out correctly as Outlook calendar event/invite.

Could you elaborate more?
I'm not sure I understood how you made it work.
Thanks.

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here

Quote:

Originally Posted by Saturn (Post 1140945)

Could you elaborate more?
I'm not sure I understood how you made it work.
Thanks.

1) Create new event in N9 calendar, add contacts, save
2) All contacts receive plain email
3) Modify event on N9 (i.e. change time), save
4) voila, proper invites are sent

Will check tomorrow if this works without putting contacts into invite at step 1) as step 2) is confusing for recipients.

Hope this helps.

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here

Hi all,
I'm back from vacation and ready to work (a little bit :D ) and help again.

Quote:

Originally Posted by x220 (Post 1138422)

Hi Sergey, could you take a look into this issue that I mentioned in another post and provide any help? Thanks.

Hello, at least for sales release it was a design decision to make notifications work like mentioned in your post. So, not a bug :) Perhaps, will be changed later in updates.

NOTE: one of the problems if we are going to change a current implementation is a case when you are receiving one email per few seconds (in always up-to-date mode, for example). Vibration and sounds looks a bit annoying, just believe me :) .

Quote:

Originally Posted by Docent (Post 1138263)

Hi,

Our Exchange 2010 SP2 organization does not enforce any password for the device via ActiveSync ("Require password" checkbox is cleared in Exchange policy settings).

However Nokia N9 with PR 1.1 software behaves differently. Upon ActiveSync configuration the phone requires user to set up the passcode and there is no way to workaround this. I'm attaching the logs I gathered from the device. I hope they would help investigate this issue.

I'd really appreciate any suggestions on how to get rid of the password :)

Thank you,
Docent

Thanks for the logs. I've checked them and everything looks fine from our (MfE) side, looks like you got a security bug. They are notified about this issue. Moreover, I've checked our bugzilla and it seems to be fixed in PR1.2.

NOTE: This one seems to be the security issue too.

Quote:

Originally Posted by jalyst (Post 1139132)

Sergey,

Some further developments RE this issue are in his thread.
Tis worthwhile reading from here (not too many posts):
http://talk.maemo.org/showthread.php...38#post1138538

godofwar's already identified what looks to be the cause of no HTML formatting for MfE Hotmail accts.
But it'd be nice to get your insights, as there appears to be no HTML formatting in other scenarios too.
After reading can you please highlight what the root causes are, & if there's solutions planned?

Thank-you.

Explanation is quite easy. Hotmail uses Exchange with a protocol version 2.5 and it is not supported downloading of the HTML text (so we are fetching only plain text). There is a workaround to download full message's MIME, but I'm not 100% sure that it will work fine and will not break anything. So, need to test it at first. Thanks for pointing me on a useful user feedback :)

Quote:

Originally Posted by Ckris (Post 1137040)

And once again. Calendar guys are aware about this issue. Btw, as I can see (on my Gmail) all invites got this part in the email: "Content-Type: text/calendar; charset="utf-8"; method=REQUEST", so... looks fine for me :rolleyes: .

P.S. We have a really long the Happy New Year holidays in Russia, so I can disappear on a long period of time again quite soon :)

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here

Back already? You need to get away from us for longer :D
Actually I think you missed some posts, starting from the 14th (Pg 39).

Quote:

Originally Posted by Sergey_Kashin (Post 1142005)

Is MortenS's reported issue the same as this IYO?

Quote:

Thanks for the explanation, & you're most welcome! :)

Quote:

It seems there's other teams that really should have threads like this.
Is there any reason why yours does, and theirs doesn't?

Quote:

P.S. We have a really long the Happy New Year holidays in Russia, so I can disappear on a long period of time again quite soon :)

Go on get outta here! :D
Come back rejuvenated/invigorated.

Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here

Quote:

Originally Posted by jalyst (Post 1142031)

Back already? You need to get away from us for longer :D

:( May be later... :D

Quote:

Originally Posted by jalyst (Post 1142031)

Actually I think you missed some posts, starting from the 14th (Pg 39).

Perhaps I missed few posts. I'll take a look one more time tomorrow.

Quote:

Originally Posted by jalyst (Post 1142031)

Is MortenS's reported issue the same as this IYO?

I'm 99.999999% sure that this is security team bug (MfE can't set up any security code, we are just calling the appropriate provided security API with policies that come from server, moreover, MfE even is not a GUI application).

Quote:

Originally Posted by jalyst (Post 1142031)

It seems there's other teams that really should have threads like this.
Is there any reason why yours does, and theirs doesn't?

Yep, there is at least one good reason for it. We have the best TPO :rolleyes: :D Just joking. Actually, I don't know why other teams don't have threads here (or on meego.com)

Quote:

Originally Posted by jalyst (Post 1142031)

Go on get outta here! :D
Come back rejuvenated/invigorated.

Thanks! :) Since holidays are going to be a very long (until 9th Jan) I'll definitely check this thread from time to time.