maemo.org - Talk
Page 62 of 95 « First 526061 62 636472 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   MeeGo / Harmattan (https://talk.maemo.org/forumdisplay.php?f=45)
-   -   N9/N950 Email/Mail for Exchange - Get help & give feedback here (https://talk.maemo.org/showthread.php?t=78480)

inukshuk 2012-03-10 20:28
Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 
I was unable to send Mail from my N9, but thanks to the detailed explanations on the wiki the issue was easy to debug. I'm just posting this here in case anyone has a similar issue and to say thanks for the great help on the wiki and in this forum.

Our mail server is configured to accept plain password authentication over TLS; however, only AUTH PLAIN was supported. Even though the mailserver reported this correctly, Mail on the N9 always tried to authenticate with AUTH LOGIN.

I don't know if this is documented anywhere, but in case you're unable to send mail with a similar configuration, check whether or not your server supports AUTH LOGIN. After I enabled AUTH LOGIN on the server everything works perfectly.

Sergey_Kashin 2012-03-11 14:35
Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 
Quote:
Originally Posted by rayluc25 (Post 1177286)
Question, I have Mail for Exchange set up with my @hotmail.com address, but everything shows in plain text instead of loading HTML even though I have checked HTML in the email settings.

Is this just a limitation of MfE? I also decided to set up my @hotmail.com account through regular email (not MfE) and the emails do show up as HTML there. Though it would be nice if I could have email pushed to me and also have HTML.
Like I wrote few pages before, it is a protocol limitation, because hotmail uses Exchange AS 2.5 protocol. To get normal HTML formatted emails for hotmail via Exchange you can use this small application to enable "download full message's MIME" mode.
NOTE: old messages still will be in plain text, but all new messages will be fine.

Quote:
Originally Posted by andynatt (Post 1177046)
I have an N9, and have set up my Mail for Exchange to connect to a Zimbra service.

Its all working (sync/send/receive/calendars), but special characters (e.g. åøæ) viewed in the "From" and "To" fields are not viewing correct.

For the character Ø i see =?UTF-8?Q?=C3=98

Is there a resolution for this?

Thanks in advance
Hmm, I can't see this bug on my test device, so looks like it is fixed. And I think it should be fixed even in PR1.2. Are you still on PR1.1?

andynatt 2012-03-12 14:16
Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 
Quote:
Originally Posted by Sergey_Kashin (Post 1177847)

Hmm, I can't see this bug on my test device, so looks like it is fixed. And I think it should be fixed even in PR1.2. Are you still on PR1.1?
No, my device is running PR1.2 (0.2012.07-1.320.05.1_PR_320) and its still occurring.

My personal Google account (from the add account options) works ok.

Anything else I can test out ?

andynatt 2012-03-12 14:25
Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 
Quote:
Originally Posted by fongo (Post 1177524)
andynatt what did you do to get Mfe/Zimbra working? I cannot get it to work, Mfe is not sending the client cert so I get SSL Handshake Failed.
I am not doing anything non-standard. I have the domain and server address configured, and using a secure connection on the default port. i also have "priority give to server" set.

Sorry I cant provide any more information than that. It worked fine first time.

thenutflush 2012-03-13 06:12
Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 
I can't seem to find any answers in other threads. So here goes nothing.

After PR1.2 update, Fenix Mail won't launch. I can't access the Mail settings and MfE can't be setup either.

Have flashed using NSU and WinFlasher to no avail. I'm kinda fustrated at the moment. Everything else works on PR1.2, just not email of any kind. There seems to be no alternative email clients for the Nokia N9 either...

Need Help!

Sergey_Kashin 2012-03-13 06:39
Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 
Quote:
Originally Posted by andynatt (Post 1178353)
No, my device is running PR1.2 (0.2012.07-1.320.05.1_PR_320) and its still occurring.

My personal Google account (from the add account options) works ok.

Anything else I can test out ?
I don't think so, looks like this issue is fixed in PR1.3, so all you need is to wait till next update :)

Quote:
Originally Posted by thenutflush (Post 1178828)
I can't seem to find any answers in other threads. So here goes nothing.

After PR1.2 update, Fenix Mail won't launch. I can't access the Mail settings and MfE can't be setup either.

Have flashed using NSU and WinFlasher to no avail. I'm kinda fustrated at the moment. Everything else works on PR1.2, just not email of any kind. There seems to be no alternative email clients for the Nokia N9 either...

Need Help!
and what about the logs?

fongo 2012-03-13 15:11
Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 
1 Attachment(s)
I am trying to set up an Mfe account on my N9 / PR1.2 with a Zimbra 7.1.2_GA server. I have been able to use the exact same account details on Android w/ SecureEAS so my user config part is correct.

A connection is never established. The logs on the N9 indicate "SSL handshake error". I had our mail admin run a tcpdump on the Zimbra server and the error we see is "Warning: No Certificate". By tracing this all the way through, I see the N9 is never sending the cert, which I *have* loaded on N9 and set to use for Mail.

Logs attached, I can privately send the tcpdump from the server. Is there some way I'm missing to force the certificate? (I was never prompted in Mfe to select a cert; I loaded the cert via Security -> Certificates).

Thanks.

nbedford 2012-03-14 21:39
Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 
How can I update the stored password for an IMAP account? Maybe I'm being real dumb, but it seems like I have to remove the account and re-add it?

Sergey_Kashin 2012-03-15 09:02
Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 
Quote:
Originally Posted by fongo (Post 1178889)
I am trying to set up an Mfe account on my N9 / PR1.2 with a Zimbra 7.1.2_GA server. I have been able to use the exact same account details on Android w/ SecureEAS so my user config part is correct.

A connection is never established. The logs on the N9 indicate "SSL handshake error". I had our mail admin run a tcpdump on the Zimbra server and the error we see is "Warning: No Certificate". By tracing this all the way through, I see the N9 is never sending the cert, which I *have* loaded on N9 and set to use for Mail.

Logs attached, I can privately send the tcpdump from the server. Is there some way I'm missing to force the certificate? (I was never prompted in Mfe to select a cert; I loaded the cert via Security -> Certificates).

Thanks.
Client certificates currently are not supported by MfE. Maybe it will be fixed in the future update(s).

Quote:
Originally Posted by nbedford (Post 1179555)
How can I update the stored password for an IMAP account? Maybe I'm being real dumb, but it seems like I have to remove the account and re-add it?
Sign-in dialog will appear as soon as email application (messegeserver) receive the authentication error from the server :) So, no need in re-creation of the account.

ceroberts75 2012-03-15 10:22
Re: N9/N950 Email/Mail for Exchange - Get help & give feedback here
 
has anyone else run into an issue with the contacts syncing to the device from mFe but not from the device to mfe?

seems that if i make a change on my pc with mfe to a contact, it will take and sync, but when i merge a new number or make a change on my handsest, it would not sync.


All times are GMT. The time now is 04:20.
Page 62 of 95 « First 526061 62 636472 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8