maemo.org - Talk
Page 16 of 47 « First 61415 16 171826 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Maemo 5 / Fremantle (https://talk.maemo.org/forumdisplay.php?f=40)
-   -   [Announce] CSSU Testing thread (https://talk.maemo.org/showthread.php?t=80525)

Estel 2012-04-17 22:31
Re: [Announce] CSSU Testing thread
 
Got a 75 Ohm headphones, or what? :)

visN900 2012-04-18 00:43
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by Estel (Post 1193550)
Got a 75 Ohm headphones, or what? :)
ROFL :D

i have creative EP-830

Estel 2012-04-18 15:29
Re: [Announce] CSSU Testing thread
 
It was only a half-joke, as mechanism detecting type of plug connected (headphones, microphone, TV-out) is based on OHM value between mass and 3th part of jack plug. On pure headphones, 3th part is non-existent, so resistance is 0. ON microphone, resistance is ~infinite. On TV-Out - while connected to TV - it's 75 Ohm.

So, if You get TV-Out enabled popping out while plugging-in headphones, it seems like it happen when plug is only partially insert - resistance between 1st or 2nd part of jack and mass (or 1st and 2nd part, it depends on how much plug is inside) is triggered by detecting 75 Ohm resistance.

I can't tell why it's happening - it doesn't in my case. Maybe Your plug/cable is damaged, and there is very little connection between 1st and 2nd pin (left and right channel), generating ~75 Ohm resistance? It's 7-8x higher value than direct (even thin) connection, so You could not detect it while using headphones.

/Estel

don_falcone 2012-04-18 15:36
Re: [Announce] CSSU Testing thread
 
sed s/mass/ground

luunaitk12 2012-04-19 05:44
Re: [Announce] CSSU Testing thread
 
hello all,

i updated to cssu last week, and everything was alright...till i got a few themes added. i wanted to get rid of a few themes so after removing them, i got a msg in fast application manager that i had to manually replace the transition.ini after it had removed the theme. so i had the cssu menu and i chose from the power button menu to restore to default. after that i booted and no more cssu option anywhere, not in menu not in power button its jus gone.

so now i need some help or guidence to get it bak or suggestion how to reinstall cssu, do i flash it with with normal firmware then added cssu again? or jus reinstall cssu over the exiting install?

i had backup menu installed b4 getting cssu and it had made a backup but its showin as not installed in app manager and doesnt show on boot with keyboard open...i had the testing cssu installed....

hope someone can provide some help...

thanks

g0r 2012-04-19 22:29
Re: [Announce] CSSU Testing thread
 
There is a bug back on Modest email in CSSU stable and testing that was fixed on PR1.3 I was mentioned few posts back as this bug was already reported and fixed I am not sure if I have to file/report it again here is the bug report , and the problem has been discussed in this thread . So do I have to file the bug again ?

freemangordon 2012-04-20 00:03
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by g0r (Post 1194617)
There is a bug back on Modest email in CSSU stable and testing that was fixed on PR1.3 I was mentioned few posts back as this bug was already reported and fixed I am not sure if I have to file/report it again here is the bug report , and the problem has been discussed in this thread . So do I have to file the bug again ?
Maybe just reopen it, if you can change the product. Otherwise open a new one with the reference to the original report.

Sorry for the troubles.

luunaitk12 2012-04-20 09:39
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by luunaitk12 (Post 1194191)
hello all,

i updated to cssu last week, and everything was alright...till i got a few themes added. i wanted to get rid of a few themes so after removing them, i got a msg in fast application manager that i had to manually replace the transition.ini after it had removed the theme. so i had the cssu menu and i chose from the power button menu to restore to default. after that i booted and no more cssu option anywhere, not in menu not in power button its jus gone.

so now i need some help or guidence to get it bak or suggestion how to reinstall cssu, do i flash it with with normal firmware then added cssu again? or jus reinstall cssu over the exiting install?

i had backup menu installed b4 getting cssu and it had made a backup but its showin as not installed in app manager and doesnt show on boot with keyboard open...i had the testing cssu installed....

hope someone can provide some help...

thanks

anyone there to help out? or guide to the right place?

Cow 2012-04-20 11:32
Re: [Announce] CSSU Testing thread
 
i've installed cssu-stable, can i still install cssu-testing?

g0r 2012-04-20 12:41
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by freemangordon (Post 1194654)
Maybe just reopen it, if you can change the product. Otherwise open a new one with the reference to the original report.

Sorry for the troubles.

New bug report opened with reference to the old one, to view, vote for faster problem solving see bug report 12604 here

Edit: Edit: apparently is a duplicate see bug 12285

maartenmk 2012-04-20 17:03
Re: [Announce] CSSU Testing thread
 
The support for multiple MCC card partitions & file systems is nice, but it seems to mess up the Tracker, at least for me it kept on indexing 'new' media files.
I have a dedicated Easy Debian partition on the internal mass memory disc.

Excluding the mount directories (/media/mmc1, mmc1p2 in my case) with Tracker Cfg did solve the problem, but I don't think that is the idea of CSSU.

freemangordon 2012-04-20 17:56
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by g0r (Post 1194841)
New bug report opened with reference to the old one, to view, vote for faster problem solving see bug report 12604 here

Edit: Edit: apparently is a duplicate see bug 12285
You can find fixed modest in cssu-devel repo, source code here

Changelog:

Code:
modest (3.90.7-11.1) unstable; urgency=low

  * Fixed bug https://bugs.maemo.org/show_bug.cgi?id=12285.
    Do not delete email from server if "Leave messages on server" is ON
    - forward-port http://gitorious.org/modest/modest/c...4bd26a33081c51
  * Manual send & receive doesn't always retrieve emails
    - https://gitorious.org/modest/modest/...39726febde76ec
  * Use async operation instead of synchronous one for the main thread
    - https://gitorious.org/modest/modest/...614190668a05f5
to enable cssu-devel repo:
using microb go to http://maemo.merlin1991.at/cssu/community-devel/ and click community-devel-fremantle.install. HAM should open, allow him to install the repo.

To upgrade modest (as root in xterm):

apt-get update
apt-get install modest

DO NOT DO apt-get upgrade unless you know what you are doing

WARNING: This is really a devel repo, use it on your own risk ;). On the other hand anyone willing to risk a reflash and/or data loss could test the new stuff there and report if any bugs are found :).

panjgoori 2012-04-21 15:18
Re: [Announce] CSSU Testing thread
 
im facing a problem after upgrading to latest CSSU version. Mediaplayer keep saying after playing a video for a while 'unable to play media. Media codec not found'. Any solution for this problem or anyone else facing this problem ? Im getting this problem after upgrading to latest CSSU version.

marbleuser 2012-04-21 16:01
Re: [Announce] CSSU Testing thread
 
Which part of cssu do i need to apt-get to prevent the need to reboot every 3 days due to a laggy interface, if I don't want anything else from cssu?

Estel 2012-04-21 17:15
Re: [Announce] CSSU Testing thread
 
Which part of CSSU I need to apt-get, if I want to avoid reboots due to battery being out-of-power, and I don't want to charge it in any way, including carrying cables, charger, etc? They're quite heavy.

Maybe CSSU devs may waste they valuable time and publish list of such components, or even better, prepare pakage CSSU-Lite with only such parts? Or do subversion for every single user preferences? What do You think, guys? Please, pleeease?
---

/Estel

peter2p 2012-04-21 17:49
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by marbleuser (Post 1195426)
Which part of cssu do i need to apt-get to prevent the need to reboot every 3 days due to a laggy interface, if I don't want anything else from cssu?
Could OptimizeN900 help you in any way?
Does a great job for me...

Quote:
Originally Posted by Estel (Post 1195451)
Maybe CSSU devs may waste they valuable time and publish list of such components
There should be a Like button beside the Thanks one...:)

marbleuser 2012-04-22 03:57
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by Estel (Post 1195451)
Which part of CSSU I need to apt-get, if I want to avoid reboots due to battery being out-of-power, and I don't want to charge it in any way, including carrying cables, charger, etc? They're quite heavy.

Maybe CSSU devs may waste they valuable time and publish list of such components, or even better, prepare pakage CSSU-Lite with only such parts? Or do subversion for every single user preferences? What do You think, guys? Please, pleeease?
---

/Estel
Geez Estel, don't you get how repositories work yet? Sounds like you've installed the entire cssu repository to get the bits you want ! How's buggy modest and buggy xterm working for ya?

So far I've only been interested in cameraui2 , so I've only installed that.

I actually withdraw my question as I don't believe cssu can prevent a heavy user's 3 day reboot. Feel free to correct me by pointing to which bits actually achieve that.

Mohammed Muid 2012-04-22 05:48
Re: [Announce] CSSU Testing thread
 
is it possible to implement full screen caller image through cssu? that would also be a nice improvement. i had many nokia phones with that. also i had an android phone which dint hav full screen caller image but after downloading some app. it could get a full screen image.

Estel 2012-04-22 10:59
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by marbleuser (Post 1195675)
Geez Estel, don't you get how repositories work yet? Sounds like you've installed the entire cssu repository to get the bits you want ! How's buggy modest and buggy xterm working for ya?

So far I've only been interested in cameraui2 , so I've only installed that.

I actually withdraw my question as I don't believe cssu can prevent a heavy user's 3 day reboot. Feel free to correct me by pointing to which bits actually achieve that.
Actually, I use modest and xterm daily (well, don't remember, when I closed xterm last time), and it's working great for me. If You want to have android-kid-like package's mess on Your device, it's up to You - yet, don't waste time of CSSU devs just because of that.

BTW, if You're so "smartie" that You feel comfortable with creating package mess on Your device, You should already know what cause UI slowdowns after certain time, and that it doesn't have anything to do with CSSU. Use You "high-tech powa" ;) and google for swap fragmentation - it was talked zillion of times on TMO.

/Estel

allpicksucks 2012-04-22 12:00
Re: [Announce] CSSU Testing thread
 
Hello everyone,

I've just installed the latest CSSU update and I guess something went wrong. Usually the device reboots after the update and everything's fine, but this time it can't turn on.
What happens is: the usual short vibration, then the NOKIA screen appears, then the screen fades and the diode blinks orange-orange-yellow. This process repeats a few times, then there is a loadscreen with the "Device malfunction!" words.

Is it caused by the wrong update? If yes, should I reflash my N900 or what?
Thanks in advance.

g0r 2012-04-22 22:03
Re: [Announce] CSSU Testing thread
 
I am not sure if I am on the right threat for requests but here I go anyway:
can moonlight be ported to our beloved n900? moonlight/silverlight . There are some threats from 2009/2010 requesting/discussing same but hey we are in 2012 now and thanks to the amazing developers in this community the improvements on our device after 3 or so years is beyond some peoples imagination. I believe this will be a major improvement welcomed by the majority who travel a lot and want to watch tv channels supplied for free for mobile devices over the internet by some entertainment providers.

RichardN900 2012-04-23 04:01
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by visN900 (Post 1190566)
ok for everyone experiencing problem of NO memory follow as this post says.
....
I'm not having this exact issue, but i am having something alike and i think it should be easy to solve.

In the past, when i wanted to change my uSD i just took off the cover, slide the card out and then insert a new one or the same one, and for the moment the back cover was again on position the phone would have the "new" card mounted and accessible.

But now, after this last update, card is not remounting so i have to reboot my phone, then it mounts it.
Also i'm seeing a "boot" partittion?... ¿isn't that a little dangerous?
And some times after remount them it shows two "memory card", one is with a (2) on it's name. This is a HUGE issue because the one with the (2) sometimes is the card and sometimes is "boot".
I think is a dangerous step back, not for me but just in the case anyone not too familiar with my phone could play around with it and mess around.



¿How could i solve the not remounting issue?
I have tried the reinstall ke-recv but there is no change on the behavior.
¿Should i extract manually the file from .deb?

Thanks.

casketizer 2012-04-23 04:08
Re: [Announce] CSSU Testing thread
 
I have a small question. Does cssu fix the play button bug of the Media Player Widget? I still haven't tried CSSU.. ;)

RichardN900 2012-04-23 04:14
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by RichardN900 (Post 1196176)
But now, after this last update, card is not remounting so i have to reboot my phone, then it mounts it.
Also i'm seeing a "boot" partittion?... ¿isn't that a little dangerous?
And some times after remount them it shows two "memory card", one is with a (2) on it's name. This is a HUGE issue because the one with the (2) sometimes is the card and sometimes is "boot".
I think is a dangerous step back, not for me but just in the case anyone not too familiar with my phone could play around with it and mess around.



¿How could i solve the not remounting issue?
I have tried the reinstall ke-recv but there is no change on the behavior.
¿Should i extract manually the file from .deb?

Thanks.
Manually extracting and "installing" ke-recv didn't solved this issue, neither does executing it manually after putting the card back.

¿Anything on this?

g0r 2012-04-23 10:08
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by freemangordon (Post 1194984)
You can find fixed modest in cssu-devel repo, source code here

Changelog:

Code:
modest (3.90.7-11.1) unstable; urgency=low

  * Fixed bug https://bugs.maemo.org/show_bug.cgi?id=12285.
    Do not delete email from server if "Leave messages on server" is ON
    - forward-port http://gitorious.org/modest/modest/c...4bd26a33081c51
  * Manual send & receive doesn't always retrieve emails
    - https://gitorious.org/modest/modest/...39726febde76ec
  * Use async operation instead of synchronous one for the main thread
    - https://gitorious.org/modest/modest/...614190668a05f5
to enable cssu-devel repo:
using microb go to http://maemo.merlin1991.at/cssu/community-devel/ and click community-devel-fremantle.install. HAM should open, allow him to install the repo.

To upgrade modest (as root in xterm):

apt-get update
apt-get install modest

DO NOT DO apt-get upgrade unless you know what you are doing

WARNING: This is really a devel repo, use it on your own risk ;). On the other hand anyone willing to risk a reflash and/or data loss could test the new stuff there and report if any bugs are found :).
I'v been monitoring modest for tthe past few days after the upgrade following your instructions and I can say that the above problem it is fixed at least for me Thank You.

RichardN900 2012-04-28 18:28
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by RichardN900 (Post 1196181)
Manually extracting and "installing" ke-recv didn't solved this issue, neither does executing it manually after putting the card back.

¿Anything on this?
I think is time to report it as a bug.

laith.m.y 2012-04-28 20:32
Re: [Announce] CSSU Testing thread
 
I didnt update cssu from 5 months ago , but yesterday I update it to the latest one , and I read in the changelog :
Quote:
Added HD/DVD resolutions support
but I didnt see any thing like this when I open the camera , is there any extra that I must do ???

thanks in advance :)

visN900 2012-04-29 01:48
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by laith.m.y (Post 1198818)
I didnt update cssu from 5 months ago , but yesterday I update it to the latest one , and I read in the changelog :

but I didnt see any thing like this when I open the camera , is there any extra that I must do ???

thanks in advance :)
u should install 720p patches as in this thread. follow those steps and then u ll c HD options in camera

qwazix 2012-05-07 05:56
Re: [Announce] CSSU Testing thread
 
I'd like to propose a feature. When the user clicks on the x in the task switcher, it usually takes some time to kill the task. There could be a dark overlay over the window to signal that a click was registered and that the window is about to close. In high load scenarios it would improve the usability significantly

Estel 2012-05-08 04:15
Re: [Announce] CSSU Testing thread
 
Brilliant idea, if doable. Countless of time I was repeatedly hitting this button (under high load), not knowing if my tap was unregistered, OR program is stuck and I'm waiting for hildon "kill-it?" prompt, OR it's just closing, but slowly.

/Estel

kent_autistic 2012-05-08 04:52
Re: [Announce] CSSU Testing thread
 
i suggest putting the glow effect just like when you press an icon in app menu.

bennypr0fane 2012-05-13 16:13
Re: [Announce] CSSU Testing thread
 
Hello,
I'm on CSSU Testing 3.1
- After installing it, behavior of my screen changed:
It's supposed to switch off automatically after 30 seconds of idleness, but it only dims down halfway. When I touch it or pull the slider in that condition, it brightens up.
To acutally switch it off, I need to do it manually w/ power button or slider.
- I installed Theme Customizer, mainly for the purpose of making the web shortcuts on the desktop smaller, but then I decided to also enable its custom transitions, which are A LOT faster and enhance my experience with N900 by about 100%, so I'd really like to keep them.
Problem is, I want my apps to force-rotate, which I set in CSSU features config, but they don't.
I'm guessing it is because transitions.ini from Theme Customizer is used (as opposed to the system one), but on the other other hand, when calling up CSSU feature config, it says it will apply any changes in the setup to BOTH files, so forced rotation should be enabled in the theme transitions.ini as well, right?
Or, maybe there is a way to use the fast transitions in the CSSU fiel?
Thanks for any help, Ben


How can I get it to auto-switch off as usual?
Thanks, Ben

Alfred 2012-05-13 16:32
Re: [Announce] CSSU Testing thread
 
Are u sure, the box "Automatically lock the screen" in the display settings is ticked?

Estel 2012-05-13 19:07
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by bennypr0fane (Post 1206114)
Hello,
I'm on CSSU Testing 3.1
- After installing it, behavior of my screen changed:
It's supposed to switch off automatically after 30 seconds of idleness, but it only dims down halfway. When I touch it or pull the slider in that condition, it brightens up.
To acutally switch it off, I need to do it manually w/ power button or slider.
I got same thing, but from very ancient times of CSSU, when there was only one branch. I have no idea what resulted in such effect - if it's CSSU or not (yet, I don't have any theme customizers, custom transitions or any other strange things), but I actually enjoy it - during long updates or any other longer operation, I don't need to switch screen on and off all the time - i just see results in dimmed screen. And, if I really want it totally disabled, i just use slider.

It's also not true, that it doesn't turn screen off at all - it does, but only after long time (few minutes of being dimmed). Strange, but actually usable.

BTW, on my second N900, I also have CSSU installed, and I didn't noticed such behavior. I also use same transitions.ini on both devices (copied from one to another), and generally, same programs. NFC WTF.

/Estel

bennypr0fane 2012-05-13 22:23
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by Alfred (Post 1206118)
Are u sure, the box "Automatically lock the screen" in the display settings is ticked?
Yes, made sure before I posted it.

bennypr0fane 2012-05-13 22:32
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by Estel (Post 1206174)
I got same thing, but from very ancient times of CSSU, when there was only one branch. I have no idea what resulted in such effect - if it's CSSU or not (yet, I don't have any theme customizers, custom transitions or any other strange things), but I actually enjoy it - during long updates or any other longer operation, I don't need to switch screen on and off all the time - i just see results in dimmed screen. And, if I really want it totally disabled, i just use slider.

It's also not true, that it doesn't turn screen off at all - it does, but only after long time (few minutes of being dimmed). Strange, but actually usable.

BTW, on my second N900, I also have CSSU installed, and I didn't noticed such behavior. I also use same transitions.ini on both devices (copied from one to another), and generally, same programs. NFC WTF.

/Estel
Actually, the screen issue is not exactly runinig my life either, I worry about it only because of battery life. You being the battery expert and all :cool: , do you think it's shortened considerably by this screen issue?
I'm not sure it's related to CSSU myself. I've had the problem posted in hardware for a week now and no response (neither in IRC). I'm just suspecting it because it started after the last CSSU update.
I wasn't implying the screen issue is related to the custom transitions though - I'm hoping these are 2 separate problems! :rolleyes:
The problem with custom transitions, I think, is that I can't force rotate apps if I use them
What is NFC WTF?

Estel 2012-05-13 23:27
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by bennypr0fane (Post 1206257)
do you think it's shortened considerably by this screen issue?
It depends. In my case, it prevent me - in many situations - from lighting the screen to "normal" brightness and disabling it all over again (to check progress of update or whatsnot). But I've got habit of using slider (to disable screen&block input) as soon as I don't need it. Results may wary in Your case, especially, if You're used to leaving device "enabled" for autolock to trigger.

NFC WTF mean that I've no f*ckin clue what the f*ck absolutely no idea why it happens ;)

/Estel

romiiio 2012-05-13 23:37
Re: [Announce] CSSU Testing thread
 
Hi i requested this earlier too any chance of having seperate wallpapers for portrait and landscape and also portrait lock feature coming? Is that on its way??

Estel 2012-05-14 00:04
Re: [Announce] CSSU Testing thread
 
Separate wallpapers are here already, check changelogs before asking.

As for lock working for either landscape or portrait, unfortunately, still haven't heard about plans of implementing it :(

/Estel

kent_autistic 2012-05-14 00:20
Re: [Announce] CSSU Testing thread
 
Quote:
Originally Posted by romiiio (Post 1206274)
Hi i requested this earlier too any chance of having seperate wallpapers for portrait and landscape and also portrait lock feature coming? Is that on its way??
orientation lock is already implemented in the latest cssu release. well atleast for me!


All times are GMT. The time now is 06:49.
Page 16 of 47 « First 61415 16 171826 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8