http://db.tt/Y2XYyeSr
Got this updates half hour ago!!!!
I m confused what to do??
@schturman will u add new qml applets made by coderus??
Will u add third option ?? (aegis-dpkg)???
What to do of the packages i have installed using inception??

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.7.8
 

All new files will be added to the new version..

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.7.8
 

i added to tweak EE inception remover..

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.7.8
 

Version 9.8.0 is ready... Update via tweak UU or Auto-checker until my dropbox will be blocked again :D
(I'm have not yet created а repo at openrepos.net)

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.7.8
 

I tried to remove Inception with EE option 1 but my N9 entered into a reboot loop.

Is there any solution other than flashing?

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.7.8
 

Reflash...

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.7.8
 

Hi Schturman. Whats news commands to the terminal Coderus aegis and the opensudo?

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.7.8
 

aegis-apt-get
aegis-dpkg -i
sudo -s
sudo

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.7.8
 

Schturman. The command line from Tweak-3 is wrong.. Cant install the system Ui of Cderus. Please see that. Thanks

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.7.8
 

Post output please...

PS. I looking into the script it have:
like it should be... Check your actions...

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.7.8
 

When i push T-3-1-0 show me:
Aegis-dpkg line96 wrong command
Attachment 32753

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.7.8
 

Do you installed Coderus Aegis-install from tweak EE ?
I tested it right now, now problem at all...


PS. I'm tired, going to sleep. Will speak later...

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.7.8
 

The file TWEAKT-3 problem line 96. Well after u see the problem and if u can upload.Thanks and good night

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.7.8
 

Did you installed Coderus Aegis-install from tweak EE ? If yes, try to install it again and post output. After this try tweak T-3 again..
Bye...

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

I cant insall openvpn from N9 Quicktweak.... Any Help...???

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Hi Schturman
I try install repo coderus and the aegis-dpkg work normal..
I think u need add the repo trust Coderus in ur option EE to aegis-dpkg.
Thanks

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Why ? Post log...

Coderus asked me not to add trusted repo... Tweak EE use another Coderus way to install aegis-install and all work perfect...

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Schturman try add me in ur skype rafaelvlmendes to show

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

This is the error while installing OPENVPN...
What should I do now...??? I think I have to install Python...
How...??? :(
I dont know...

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

I've just installed power pack and now I'm having issues with the standby screen. Once on, it doesn't dim like it usually does, just stays bright. Then when I cover the proximity sensor, it turns off, but when I uncover it the screen stays off, but still allows me to double tap. I've uninstalled power pack and it hasn't fixed this problem. Can anyone help me with this?

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.7.8
 

Same problem here.. And after install, brightness bar was down first and then it just disappears.. and yes, i installed aegis install from EE

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Just upgraded to qtweak 9.8.0, then went to remove inception via tweak EE-1. After pressing enter and putting root password the phone rebooted. Now it's in rebootloop and will have to flash again (Just made a backup so no big deal).
Anyone else removed inception via tweak EE-1? I don't know if the problem was that I didn't install coderus aegis-install before removing it.

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

i removed inception via tweak EE-1 works perfect...
Try this for solution...
http://talk.maemo.org/showpost.php?p...24&postcount=2

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

I uninstalled manually and got thrown into a boot loop, also. After a fresh start...we are good to go.
HOWEVER, after applying my tweaks, FileBox ROOT is not saving my settings (theme color, show hidden files, etc). Any guess what's going on there? Everything else appears to be working as it should.

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

i installed Coderus Aegis-install , but when go to tweak HH it gave me Coderus Aegis-install or Open mode .
so it's not installed yet .
please how to install it and fix this problem in this version 9.8.0

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

mikal2100, yes.. Probably... I will add checking of python package to this tweak.

Probably you played with toggles from status menu (ALS, blanking).
Try to deactivate this toggle from status menu or try tweak BB-1-2 and BB-3-1

You sure aegis install installed correctly ? Can you try again from tweak EE-2 and post output.

It strange that you are number 3 that got reboot-loop... I tested it on both my devices before release this version. All work like expected...
Now I see also fnldstntn used EE-1 without any problem... You not need coderus aegis-install before removing it.
How work Tweak EE-1:
1. It check if restok file have word "Rank". if it have "Rank -100" it will run restok-fixer script:
2. Uninstalling 3 packages of inseption:
3. installing hack-installer, that will install coderus patched aegis-install and opensudo.
4. ask you to create USER pass.
5. ask you to reboot.
That all...

You mean you uninstalled inception manually (not from tweak) and you got reboot-loop ?
Before applying fileboxROOT, Open normal filebox, navigate to some folders and exit. Now Apply fileboxROOT, try to save setting exit and open again to check. If still not saved, try again open normal filebox, play with it a little and try again to save setting in fileboxROOT.

Probably you installed Coderus Aegis-install not from Tweak EE, you did it manually ? If yes this is a problem, because tweak checking if opensudo installed, because i DON'T know how to check if Aegis-install patched or not... Tweak EE-1 and EE-2 will install Aegis-install and opensudo that needed for some tweaks.
Just go to tweak EE-2 and install it.

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Yes, that is what I mean. I have a second N9 and I did the same thing (manually remove Inception, NOT with N9QT) and it worked fine. The only difference is that the second N9 had all packages installed with Inception removed first. I read that that shouldn't matter, though...

Thanks for the tips, I will try them.

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Inception uninstall never asked for me to reboot it. It just shutdown and then tried to reboot. Neither did ask me to create a user pass.

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Something wrong with your phone... When you uninstall inception it NOT should shutdown your phone...

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

I installed CoDerus Aegis-install from tweak EE-2 and Aegisctl from EE-4; and then T-3-1-0 (CoDeurs Unrestricted System-UI) but it doesn't work, output says missing dependencies. Also the same on tweak HH, it says i need CoDerus Aegis-install or open-mode installed, so CoDerus Aegis-install doesnt work?.

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

1. Go to tweak EE-2 -> run it.
2. Copy the FULL output here
3. Go to T-3-1-1-0 -> copy output and post here.

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Do i need to uninstall that coderus ui before install back with aegis-install, not inception?

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

no... you not need...

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Here are screenshots of my install...

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Ok, see attached files.
But there is something different this time: the first time i installed EE-2 (CoDerus Aegis.install, the phone rebooted itself), but now not reboot after the installation.

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Ah, but there's this... When uninstalling inception it automaticly installs aegis-installer and opensudo and reboots after that.. Let's see how it goes when i install directly from EE-2..

No, it's the same.. Brightness bar is missing.. origin can not be determined

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Mmm...i don't know, i have errors in all the applets, only the abailability applet is installed correctly.

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Timpaxi, It hard to see output from images... Please copy the text and post. Also run first EE-2 and post output..

herno24, strange... It's not EE-1, it's EE-2Too much errors and probably aegis-install not installed like it should be installed. Also it not installed opensudo...

I don't know what the reason... Maybe restok-fixer is not enough and I need to put back the origin-fixer...

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Aegis rejecting system-ui-brightness-qml_1.0.2_armel.deb: package 'system-ui-brightness-qml' origin cannot be determined -- signature checkfailed
Aegis rejecting duicontrolpanel-ledapplet-l10n-additional_0.0.3-3_all.deb: package 'duicontrolpanel-ledapplet-l10n-additional' origin cannotbe determined -- signature check failed
Aegis rejecting duicontrolpanel-ledapplet_0.0.3-3_armel.deb: package 'duicontrolpanel-ledapplet' origin cannot be determined -- signature check failed
(Reading database ... 63018 files and directories currently installed.)
Preparing to replace system-ui-tools 1.0.3 (using system-ui-tools_1.0.3_armel.deb) ...
xsession/sysuid stop/waiting
Unpacking replacement system-ui-tools ...
Preparing to replace system-ui-widgets 1.0.7 (using system-ui-widgets_1.0.7_armel.deb) ...
initctl: Job has no running instances: xsession/sysuid
Unpacking replacement system-ui-widgets ...
Preparing to replace system-ui-avialability 1.0.0 (using system-ui-avialability_1.0.0_armel.deb) ...
initctl: Job has no running instances: xsession/sysuid
Unpacking replacement system-ui-avialability ...
Preparing to replace libkqoauth 0.97.0 (using .../libkqoauth_0.97.0_armel.deb) ...
Unpacking replacement libkqoauth ...
Preparing to replace quick-status-updater 0.2-2 (using .../quick-status-updater_0.2-2_armel.deb) ...
stop: Job has no running instances: xsession/sysuid
xsession/sysuid start/running, process 3700
Unpacking replacement quick-status-updater ...
Preparing to replace system-ui-music-controls 0.2 (using .../system-ui-music-controls_0.2_armel.deb) ...
Unpacking replacement system-ui-music-controls...
Restarting system-ui...done
aegis-installing system-ui-tools (from '')
aegis-installing system-ui-widgets (from '')
aegis-installing system-ui-avialability (from '')
aegis-installing libkqoauth (from '')
aegis-installing quick-status-updater (from '')
aegis-installing system-ui-music-controls (from '')
Setting up system-ui-tools (1.0.3) ...
initctl: Job is already running: xsession/sysuid
Setting up system-ui-widgets (1.0.7) ...
initctl: Job is already running: xsession/sysuid
Setting up system-ui-avialability (1.0.0) ...
initctl: Job is already running: xsession/sysuid
Setting up libkqoauth (0.97.0) ...
Setting up system-ui-music-controls (0.2) ...
Restarting system-ui...done
Processing triggers for applauncherd-launcher ...
Setting up quick-status-updater (0.2-2) ...
xsession/sysuid stop/waiting
xsession/sysuid start/running, process 3811
Processing triggers for libcontextsubscriber0 ...
Updating from: '/usr/share/contextkit/providers/'
Generated: '/usr/share/contextkit/providers/cache.cdb'
mv: can't rename '/usr/share/meegotouch/applicationextensions/statusindicatormenu-bluetooth.desktop': No such file or directory
mv: can't rename '/usr/share/meegotouch/applicationextensions/statusindicatormenu-transfer.desktop': No such file or directory

ALL Applets installed successfully

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0
 

Selecting previously deselected package hack-installer.
(Reading database ... 63018 files and directories currently installed.)
Unpacking hack-installer (from .../hack-installer_1.0.4_armel.deb) ...
aegis-installing hack-installer (from '')
Setting up hack-installer (1.0.4) ...
# Harmattan aegis installer hacking
# Backuping installer package status
# Backuping original sources lists
# Backuping original apt lists
# Removing old data
# Injecting local repository
# Refreshing hack repository
# Installing patched aegis-install
# Removing local repository
# Restoring original apt lists
# Restoring original sources lists
# Returning installer package status
# Aegis-installer hacked. You can remove hack-installer package now =)
Processing triggers for applauncherd-launcher ...
Luetaan pakettiluetteloita
Muodostetaan riippuvuussuhteiden puu
Luetaan tilatiedot... Valmis
Muodostetaan riippuvuussuhteiden puu
Luetaan tilatiedot... Valmis
Seuraavat paketit POISTETAAN:
hack-installer*
0 päivitetty, 0 uutta asennusta, 1 poistettavaa ja 4 päivittämätöntä.
Toiminnon jälkeen vapautuu 692k t levytilaa.
(Reading database ... 63037 files and directories currently installed.)
Removing hack-installer ...
Processing triggers for applauncherd-launcher ...
aegis uninstalling hack-installer
Updating desktop entries... Done
/opt/N9QTweak/Tweaks/TweakEE: rivi 150: aegis-dpkg: komentoa ei löydy
Now you need create pass for USER!
Changing password for user
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.

Re-enter new password:
Password changed.

Coderus Aegis-install & opensudo installed !