maemo.org - Talk - [Announce] N9/50 QuickTweak app (for PR1.3 only)

Flashed it today in the morning! Still a lot of issues, and even worse than before. I will try to get the proper full Image.BIN file to repeat it with the EMMC as suggested also earlier.

Might be of help that as soon as I recovered some of my contacts in the weekend and noticed some drawbacks, I used the QuickReboot Icon from the N9QTweak App (v 978 or 9, if I recall properly), and since then I got the bloody yellow exclamation mark box with the fearless legend, This device is malfunctioning! even while I tried flashing for the first time,

lacro

2013-07-30 03:07

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0

A few months ago, as soon as I bought my N9, I updated the FirmWare to PR 1.3 40 2012 with out any hassle, with the proper BIN image file v. 059J260, better suited for my needs than my very own v 059M2W4 release according to my device.

Currently I have so many issues (improper use of N9QTweak) that I should flash it thoroughly including the EMMC procedure, but as NaviFirm is down and used to tell me so, I don't know now which are all the files required in this case.

Considering, http://www.mrcrab.net/nokia/Nokia_N9...n=40.2012.21.3
or http://www.mrcrab.net/Nokia-Product-...ctCode=059J260

Schturman

2013-07-30 04:37

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0

From the last link you can download legacy and emmc too.
Qreboot it's not a reason for malf, it just reboot command ;)

Akkumaru

2013-07-30 05:04

How do you seperate each option in QRefresh as an application? Thanks

Schturman

2013-07-30 07:50

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0

Look into the script how i built it:
/opt/N9QTweak/Refresh/refresh

Schturman

2013-07-30 20:10

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0

Quote:

Originally Posted by Ancelad (Post 1360850)

UPD: restored by dd. Ubuntu, I love you.

Can you write a full guide how to do this, please. If I remember right the Open mode needed ?

Schturman

2013-07-30 23:36

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0

New version ready (9.8.1) ! :D
Update via tweak UU or Auto-checker. First post updated too...

PS. Who need WIFI 5GHz support, please test this tweak and report here if you see some problems. After reboot it can take a few sec. until the .conf file start to work. lease check also after Full Refresh if this continue to work or not.

guillermorojaz

2013-07-31 03:30

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Schturman.

Greetings. I hope you can help me.
I have a question, would like to change the response time to press the screen to rearrange the icons, where is the file that controls these milliseconds? I searched on the meegotouch.css but I could not come up with that parameter. It's too short, I would like to extend that time. I hope I understand, and please excuse my English.

Thanked.

Schturman

2013-07-31 05:27

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Sorry, i don't have answer for this.

Ancelad

2013-07-31 05:53

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

About 5 GHz - why .conf instead init?

Schturman

2013-07-31 06:32

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by Ancelad (Post 1364020)

About 5 GHz - why .conf instead init?

You mean like Coderus said on lolnokia.ru ?
Where is this init ? I thought he meant to files in: /etc/init or in: /etc/init/xsession, for example to xsession.conf or icd2.conf
I missed something ?

PS. what about guide for dd ?

Ancelad

2013-07-31 06:37

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by Schturman (Post 1364024)

You mean like Coderus said on lolnokia.ru ?
Where is this init ? I thought he meant to files in: /etc/init or in: /etc/init/xsession, for example to xsession.conf or icd2.conf
I missed something ?

CODeRUS answered you on lolnokia. I've used xsession :)

Quote:

Originally Posted by Schturman (Post 1364024)

PS. what about guide for dd ?

What do you mean? My "four"pda-forum post?

coderus

2013-07-31 06:37

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

@Scturman check Allnokia, there is repacked iw for harmattan with autostart and config :)

Schturman

2013-07-31 06:56

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by Ancelad (Post 1364025)

What do you mean? My "four"pda-forum post?

Also :)

Quote:

Originally Posted by coderus (Post 1364026)

@Scturman check Allnokia, there is repacked iw for harmattan with autostart and config :)

Thanks, I saw it and asked some questions. I will change this tweak with your new file.

Ancelad

2013-07-31 07:04

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by Schturman (Post 1364031)

Also :)

WIP :) BTW it wil be in Russian... And I think, you know all these methods :)

Schturman

2013-07-31 07:28

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by Ancelad (Post 1364032)

WIP :) BTW it wil be in Russian... And I think, you know all these methods :)

Russian still no problem for me :D :p I did it once something like 1-1.5 years ago and I don't remember where I saw this guide and if I saved this or not. I remember only that user need open mode for this (if I remember right) :)
I don't use open mode and all my restores after reflash I do via tweak RR + system restore.

nieldk

2013-07-31 07:46

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Did anyone have issues with openvpn activator ?
Cant seems to get that to install, n9QTweak just exists/crashes, and in shell terminal I see an apt message that it is broken, and needs to be reinstalled. Which I cant do, as original package cant be located ?

Ancelad

2013-07-31 07:48

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by Schturman (Post 1364033)

Ok, I'll give you link :) OpenMode is needed in some methods... Maybe I'll make it in English too, but I'm going to have rest in a few days, so... :D

Schturman

2013-07-31 08:25

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by Ancelad (Post 1364038)

Ok, I'll give you link :) OpenMode is needed in some methods... Maybe I'll make it in English too, but I'm going to have rest in a few days, so... :D

Will be nice thanks. If it can work in normal mode too it will be more then nice :D

Schturman

2013-07-31 08:25

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by nieldk (Post 1364037)

Post full output from tweak...

nieldk

2013-07-31 09:04

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by Schturman (Post 1364044)

Post full output from tweak...

Well, any 'easy way' :) The output is quite large now, as it is showing a bunch of 'recovering openvpn' messages.
Difficult to catch the screen output, as N9QT quits immediately after trying to reinstall openvpn (i guess thats what its trying to do anyway)

Schturman

2013-07-31 09:40

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by nieldk (Post 1364049)

It not should completely exit from N9QT... :confused: It strange if it exit from tweaker...
Do you have python, wget, unzip installed? If yes, this tweak should work...

nieldk

2013-07-31 09:44

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by Schturman (Post 1364053)

It not should completely exit from N9QT... :confused: It strange if it exit from tweaker...
Do you have python, wget, unzip installed? If yes, this tweak should work...

Yep, all is installed.
(I had to manually install coderus repo also for open-sudo)
I use open mode kerne (pr1.3) and no inception.
My install is a fairly clean and recent reflash, so its really a clean install trying to 1st get openvpn

Schturman

2013-07-31 09:47

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Ahhh.. Open mode... It known issue that in installation process it can close app. This is a reason that N9QT close itself..

Ancelad

2013-07-31 09:48

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by Schturman (Post 1364055)

Open mode... It known issue that in installation process it can close app. .

Yes, sometimes... :)

Schturman

2013-07-31 10:24

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Version 9.8.1 repackaged and reuploaded. Update via tweak UU.
* Tweak СС-4-1 - updated with new package from CODeRUS (thanks), activation changed.

PS.. Who already installed 5GHz support from tweak СС-4-1, before update, please remove this tweak СС-4-2.

mousse04

2013-08-01 13:41

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Does PowerPack version in 9.8.1 work great? Even with fasterN9?
I read the thread about PowerPack but never got clear answer of what is this?

Schturman

2013-08-01 13:58

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

It work like it should work. No problem with fasterN9.

mousse04

2013-08-01 14:14

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by Schturman (Post 1364242)

It work like it should work. No problem with fasterN9.

What this mod is supposed to do?

Garp	2013-08-01 17:46

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by Schturman (Post 1364055)

Ahhh.. Open mode... It known issue that in installation process it can close app. This is a reason that N9QT close itself..

Yes but what's the result or what to do if you have openmode? I din't get it!:confused:

Schturman

2013-08-01 18:46

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by mousse04 (Post 1364248)

What this mod is supposed to do?

This is not a really mod, PP include changed system files. In this files fixed some bugs...

Quote:

Originally Posted by Garp (Post 1364284)

Yes but what's the result or what to do if you have openmode? I din't get it!:confused:

It simple... Just open the script of the tweak that you need and do all steps manually...

Garp	2013-08-02 07:02

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

1 Attachment(s)

I uninstall openvpn and got attached message (and same when running apt-get upgrade)
E: The packet openvpn have to be reinstalled but can't find archive with it.
Is openvpn then correct uninstalled?

Schturman

2013-08-02 08:19

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Wait a little and try again. or run: pkill pkgmgrd twice and try again. or do it manually:

Code:

apt-get remove --purge -y openvpn openvpn-blacklist openssl-blacklist openssl libpkcs11-helper1

PS:
This is what tweak include:

Code:

devel-su user -c "/etc/init.d/openvpn stop >/dev/null 2> /dev/null"

rm -f /etc/init/apps/aopenvpn-icon-changer.conf

ststus=$(sed -n 10p /etc/dbus-1/system.d/dnsmasq.conf | awk '{print $2}' | cut -d'"' -f2)

if [[ $status == "default" ]]; then

:

else

sed -i "/<policy user=\"user\">/,/policy context=\"default\">/c\\

        <policy context=\"default\"> " /etc/dbus-1/system.d/dnsmasq.conf

fi

rm -f /usr/share/applications/flushdns* && devel-su user -c "rm -f /home/user/.local/share/applications/openvpn*"

cd /usr/share/icons/hicolor/80x80/apps && rm -f *openvpn80* flushd* && cd /usr/share/icons/hicolor/64x64/apps && rm -f *openvpn64* flushd*

cd /etc/openvpn && rm -f vpn.conf log.txt 12vpn.sh

apt-get remove --purge -y openvpn openvpn-blacklist openssl-blacklist openssl libpkcs11-helper1

Garp	2013-08-02 09:18

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by Schturman (Post 1364392)

Wait a little and try again. or run: pkill pkgmgrd twice and try again. or do it manually:

Code:

apt-get remove --purge -y openvpn openvpn-blacklist openssl-blacklist openssl libpkcs11-helper1

PS:
This is what tweak include:

Code:

devel-su user -c "/etc/init.d/openvpn stop >/dev/null 2> /dev/null"

rm -f /etc/init/apps/aopenvpn-icon-changer.conf

ststus=$(sed -n 10p /etc/dbus-1/system.d/dnsmasq.conf | awk '{print $2}' | cut -d'"' -f2)

if [[ $status == "default" ]]; then

:

else

sed -i "/<policy user=\"user\">/,/policy context=\"default\">/c\\

        <policy context=\"default\"> " /etc/dbus-1/system.d/dnsmasq.conf

fi

rm -f /usr/share/applications/flushdns* && devel-su user -c "rm -f /home/user/.local/share/applications/openvpn*"

cd /usr/share/icons/hicolor/80x80/apps && rm -f *openvpn80* flushd* && cd /usr/share/icons/hicolor/64x64/apps && rm -f *openvpn64* flushd*

cd /etc/openvpn && rm -f vpn.conf log.txt 12vpn.sh

apt-get remove --purge -y openvpn openvpn-blacklist openssl-blacklist openssl libpkcs11-helper1

Tried all nothing helps same message at the end manually :
~ # apt-get remove --purge -y openvpn openvpn-blacklist openssl-blacklist openss
l libpkcs11-helper1
Indlæser pakkelisterne... Færdig
Opbygger afhængighedstræ
Læser tilstandsoplysninger... Færdig
E: Pakken openvpn skal geninstalleres, men jeg kan ikke finde noget arkiv med den.
~ #

coderus

2013-08-02 09:24

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Code:

export LANGUAGE=C

before posting logs :D

lablueboy

2013-08-02 10:08

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.0

Quote:

Originally Posted by Schturman (Post 1360564)

Coderus added new version of hack-installer.. I will repackage this version with new hack-installer...
herno24, yes, this is exactly a problem, but why it not installed for some people like you, I don't know...

hello it's me again. I tried both ee1 and ee2. Both start by installing aegis hack right? But qtweak always crashes when it removes the hack installer. I manually installed opensudo. I also had to manually remove inception.(it's fine right?)
also i tried to download the deb package and install it manually before i removed inception. And when i removed the package from the app manager, same thing it crashed.
it said that the aegis hack was installed but i was wondering why did it crash when uninstalling the installer?

Schturman

2013-08-02 11:48

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Do you have open mode?
Copy/paste output from tweak that you used: EE-1 or EE-2

Garp	2013-08-02 11:49

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Quote:

Originally Posted by coderus (Post 1364407)

Code:

export LANGUAGE=C

before posting logs :D

xport LANGUAGE=C
~ # apt-get remove --purge -y openvpn openvpn-b
lacklist openssl-blacklist openssl libpkcs11-he
lper1
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: The package openvpn needs to be reinstalled, but I can't find an archive for it.
~ #

Schturman

2013-08-02 12:40

Re: [Announce] N9/50 QuickTweak app (for PR1.3 only) - v9.8.1

Garp, Try to run apt-get update and after this run this tweak again or remove manually.
If it not help, try to install this tweak again and after this uninstall.

All times are GMT. The time now is 10:41.

Page 188 of 205

188

Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8