maemo.org - Talk
Page 1 of 4 1 23 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N9 / N950 (https://talk.maemo.org/forumdisplay.php?f=51)
-   -   Crack in N9's Polycarbonate (https://talk.maemo.org/showthread.php?t=81690)

automagic68 2012-01-18 18:16
Crack in N9's Polycarbonate
 
2 Attachment(s)
The polycarbonate on my N9 has a crack near the camera's dual LEDs on the back. Should I worry about it?

I attached pictures of the crack.

Manatus 2012-01-18 18:25
Re: Crack in N9's Polycarbonate
 
Quote:
Originally Posted by automagic68 (Post 1152423)
The polycarbonate on my N9 has a crack near the camera's dual LEDs on the back. Should I worry about it?
If you mean very very small half rounded hole immediately next to the LEDs, it is the second microphone used in removing noise from phone calls.

automagic68 2012-01-18 18:43
Re: Crack in N9's Polycarbonate
 
Quote:
Originally Posted by Manatus (Post 1152428)
If you mean very very small half rounded hole immediately next to the LEDs, it is the second microphone used in removing noise from phone calls.
The crack is actually near that hole...See attached pics

ENNINE 2012-01-18 19:01
Re: Crack in N9's Polycarbonate
 
****. That crack will continue, slowly.

Manatus 2012-01-18 19:06
Re: Crack in N9's Polycarbonate
 
Quote:
Originally Posted by automagic68 (Post 1152436)
The crack is actually near that hole...See attached pics
Ouch! Ennine is probably right and it may keep traveling... :(

automagic68 2012-01-18 19:30
Re: Crack in N9's Polycarbonate
 
Is getting the shell replaced eventually by a repair service possible? I am totally confused at how that crack came to be as I haven't ever dropped the N9 or mistreated it. :confused:

Ayle 2012-01-18 19:37
Re: Crack in N9's Polycarbonate
 
Quote:
Originally Posted by automagic68 (Post 1152458)
Is getting the shell replaced eventually by a repair service possible? I am totally confused at how that crack came to be as I haven't ever dropped the N9 or mistreated it. :confused:
It might have been there before as an hairline crack that wasn't visible and just grew bigger.

eerde 2012-01-18 20:05
Re: Crack in N9's Polycarbonate
 
Typical warrenty case ...

Muzimak 2012-01-18 20:07
Re: Crack in N9's Polycarbonate
 
Jeez man sorry, is it possible to have the shell replaced proffessionally?

ENNINE 2012-01-18 20:32
Re: Crack in N9's Polycarbonate
 
Maybe. Why not.


All times are GMT. The time now is 08:22.
Page 1 of 4 1 23 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8