|
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
See:
Code:
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.342.01.1_PR_342ROW FW is pr legacy 001 hence it fails as downgrading isn't allowed even within the same fw version (pr1.3)... |
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
Bloody annoying!
|
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
Quote:
The forum here is quite fast when it comes to updates with proper guides so just refer here next time... |
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
Hi, I've got a N9 which shows the yellow warning triangle telling me that I have changed the software.
I have now tried re-flashing (on several computers) using this guide but it gives me an error message. Anyone who can help bring it back to life? ---------------------------------------------------- Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Program Files\Nokia\Flasher>flasher.exe -i flasher 3.12.1 (Oct 6 2011) Harmattan WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty. Suitable USB interface (bootloader/phonet) not found, waiting... Found device RM-696, hardware revision 1603 NOLO version 2.3.6 Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_001 Success C:\Program Files\Nokia\Flasher>flasher.exe -f -F DFL61_HARMATTAN_40.2012.21-3_PR _LEGACY_001-OEM1-958_ARM.bin flasher 3.12.1 (Oct 6 2011) Harmattan WARNING: This tool is intended for professional use only. Using it may result in permanently damaging your device or losing the warranty. Suitable USB interface (bootloader/phonet) not found, waiting... Found device RM-696, hardware revision 1603 NOLO version 2.3.6 Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_001 Sending ape-algo image (7096 kB)... 100% (7096 of 7096 kB, avg. 13141 kB/s) Suitable USB interface (phonet) not found, waiting... Ping attempt 1 (250 ms) Server application: 1.7.2 Found product RM-696 rev. 1603 Server implements softupd protocol version 1.8 Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001 Image moslo not present Image mmc not present Image tar skipped Image config skipped Battery level 93 %, continuing. image [state progress transfer flash speed] --------------------------------------------------------------------- [x] cert-sw [finished 100 % 1 / 1 kB NA ] [x] cmt-2nd [finished 100 % 95 / 95 kB NA ] [ ] cmt-algo [pending 0 % 0 / 0 kB NA ] [ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ] [x] xloader [finished 100 % 23 / 23 kB NA ] [x] secondary [finished 100 % 94 / 94 kB NA ] [_] kernel [writing 37 % 2048 / 2714 kB 1910 kB/s] [_] rootfs [finishing 100 % 2048 / 1170282 kB NA ] ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error image [state progress transfer flash speed] --------------------------------------------------------------------- [x] cert-sw [finished 100 % 1 / 1 kB NA ] [x] cmt-2nd [finished 100 % 95 / 95 kB NA ] [x] cmt-algo [finished 100 % 789 / 789 kB NA ] [x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3540 kB/s] [x] xloader [finished 100 % 23 / 23 kB NA ] [x] secondary [finished 100 % 94 / 94 kB NA ] [x] kernel [finished 100 % 2714 / 2714 kB 1314 kB/s] [f] rootfs [finishing 0 % 2048 / 1170282 kB NA ] Fetching error list: ======================================== bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed bb5_rdc_cert_read failed mmc: sfdisk returned status 1 mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmczZnBYu/internal0p2' mmc: Could not remove mount directory /tmp/sudmmczZnBYu/mnt: No such file or dir ectory [Pipe 5] Finishing in error state with status 1 ======================================== ERROR: Failed to flash images C:\Program Files\Nokia\Flasher> |
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
Take it easy, don't jump at ones on fllashing the device, but first install the pcsuite software and just insert your phone on one of USB ports and select as syncronising device and let it instal the phone device driwers and after is finish installing pull USB out few sec then put it again on the same USB port but select as Storage driver, and let it install drivers...then prepare your fllashing operation.
I might guess..that your phone allready was fllashed with "zimage" for nitdroid that's why you are getting the warning on screen, weell fllashing it again it will vipe that duo boot...but is up to you... I see by the product version...you are atempting to update, and local version is 001 as you see on firmware file...don't use higher value than that. Try this way...to make it easy fllashing your phone, maybe you should make dir in c:/nokia and install fllash in there and import your firmare.bin in that c:/nokia/fllasher and in comand line on dosbox-win enter like this: c:/nokia/fllasher/fllasher.exe -f -F c:/nokia/fllasher/firmware.harmatan_001.bin and turn your phone OFF. I did fllash my phone by turning on instead bcz pc could not find my phone few times...so it might happen to your phone to...so try borh ways...but careful do not disconect cable if pc and phone are active and operating fllashing or transfering files! |
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
Yikes :eek: it looks like another of those N9s with dodgy flash memory...
|
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
Thanks AN9 and THEDEAD1440!
Unfortunately it seems that it is a hardware issue. I have tried and tried but no success. Is there any possibility to install a kind of "basic" software? I don't really have anything to loose now. |
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
Quote:
|
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
Quote:
i have same Error |
Re: [HOWTO] Comprehensive Firmware Flashing Guide for N9
Quote:
|
| All times are GMT. The time now is 10:21. |
vBulletin® Version 3.8.8