maemo.org - Talk
Page 108 of 129 « First 98106107 108 109110118 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N9 / N950 (https://talk.maemo.org/forumdisplay.php?f=51)
-   -   overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.7] (https://talk.maemo.org/showthread.php?t=83357)

superleggera 2012-08-15 19:00
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Hi,

Been following this thread, thanks for the excellent work, makes a noticeable difference to my N9.

I've read through this thread, but there doesn't seem to be much in the way of people posting their best clock/voltage combinations. This OMAP 3630 chipset runs natively at up to 1.2ghz anyway, so I would expect it to be stable at that clock speed so I'm not too concerned by running at that speed, it's the voltages I'm not sure about :-)

kfahoo 2012-08-20 21:56
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
I have noticed that when phone is overclocked I have problem with installing bigger apps either from store and manually, anyone else noticed that issue or is it only my phone?

JadHusin 2012-08-24 04:40
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
I got the "operation not permitted error (do you have the right credentials?)" error from this command : /usr/sbin/. Is this related to NITDroid? I have NITDroid installed on my Nokia N9.

Zion~ 2012-09-01 06:45
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Anyone safely overclocking at 1300 MHz?

Arie 2012-09-01 06:51
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Zion~ (Post 1258901)
Anyone safely overclocking at 1300 MHz?
I've done it, but I'd suggest to stay away from overclocking to 1300, I stick to stock voltage and as far as I can push that 1150mhz is the best for me.

Zion~ 2012-09-01 06:59
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Arie (Post 1258903)
I've done it, but I'd suggest to stay away from overclocking to 1300, I stick to stock voltage and as far as I can push that 1150mhz is the best for me.
Hmm, odd just tried these settings and my device rebooted.
Default voltage is 1225000, no?

Arie 2012-09-01 07:05
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Zion~ (Post 1258904)
Hmm, odd just tried these settings and my device rebooted.
Default voltage is 1225000, no?
I have similar voltage, set it to 1150mhz, if that doesn't work drop it to 1125mhz.

Zion~ 2012-09-01 07:08
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Arie (Post 1258907)
I have similar voltage, set it to 1150mhz, if that doesn't work drop it to 1125mhz.
I'm at 1140 MHz

Arie 2012-09-01 07:11
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Zion~ (Post 1258909)
I'm at 1140 MHz
Then stay there :)

Zion~ 2012-09-01 07:13
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Arie (Post 1258910)
Then stay there :)
Spoke too soon, after the tests are completed my device restarts itself shortly after.

Even at 1125.


All times are GMT. The time now is 14:34.
Page 108 of 129 « First 98106107 108 109110118 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8