maemo.org - Talk - overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.7]

maemo.org - Talk (https://talk.maemo.org/index.php)

- Nokia N9 / N950 (https://talk.maemo.org/forumdisplay.php?f=51)

- - overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.7] (https://talk.maemo.org/showthread.php?t=83357)

Re: overclocking kernel modules for PR1.2 [v1.4]

My device acts weird at similar frequencies . Here's what I tested so far and results , I want to know if someone else is getting this .
I also turned on SR but results are same

1. 1350mhz - 1.3875v : stable
2. 1360mhz - 1.3875v : stable
3. 1370mhz - 1.3875v : extreme lag and freezes , device is inoperable
4. 1370mhz - 1.4v : same as point 3
5. 1370mhz - 1.4125 : same 3
6. 1370mhz - 1.4250 : same

And every frequency above 1370mhz makes the device inoperable , no matters what voltage or sr .

I see an improvement in conky with this new opptimizer , now I'm not seeing anymore only max frequency , the frequency goes also to 300 or 600mhz .

Re: overclocking kernel modules for PR1.2 [v1.4]

Donated. Thanks for the effort, and I really appreciate making a GUI as well. Sharing is caring :)

I've been using 1.3 GHz stable on my N9, haven't yet reached for the limit.

Re: overclocking kernel modules for PR1.2 [v1.4]

Quote:

Originally Posted by Dragoss91 (Post 1198045)

Probably the CPU is slowing itself down due to overheating, we will need some more reports and research to be sure.

Quote:

Originally Posted by Sniper_swe (Post 1198040)

Working great with open mode kernel (nitdroid kernel)
Apply on startup is not yet supported?

Apply on startup is tricky, we need another script or daemon and it needs to be very careful to not apply the same frequency and voltage 2x in a row if you get an unexpected reboot, otherwise you can get a brick (you would need to reflash but if we apply the bad settings too early you might not be able). To avoid leaving this in development another week, the initial version will not have this feature.

Re: overclocking kernel modules for PR1.2 [v1.4]

Quote:

Originally Posted by Creamy Goodness (Post 1198033)

Yes, there's links to donate at the bottom of the first post. If you cannot donate, send me a private message with your email and I will send it.

Donation complete on paypal, thank for all work. I sent an email.

Re: overclocking kernel modules for PR1.2 [v1.4]

I saw 1 more line of wifi signal with 1.3GHZ or maybe its luck, gonna test it further. (Im not using the GUI)
Did anyone note this?

Re: overclocking kernel modules for PR1.2 [v1.4]

N9 seems to have a lot of secrets :D:D:D:D:D:D:D:D

Attachment 26015

Re: overclocking kernel modules for PR1.2 [v1.4]

I will consider that a bug report, I wonder what happened.

Re: overclocking kernel modules for PR1.2 [v1.4]

Quote:

Originally Posted by Creamy Goodness (Post 1198083)

I will consider that a bug report, I wonder what happened.

it was funny :d

when this happened i was tweaking some values in /sys/devices/cpu/cpufreq/

Re: overclocking kernel modules for PR1.2 [v1.4]

Quote:

Originally Posted by Dragoss91 (Post 1198082)

N9 seems to have a lot of secrets :D:D:D:D:D:D:D:D

Attachment 26015

kkk.. the world's most powerful..
-
care not to turn a stone $ 450
-
:rolleyes:

Re: overclocking kernel modules for PR1.2 [v1.4]

Woot! I just donated. Thanks for all the hard work. I'll PM you, as requested.