maemo.org - Talk - overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.7]

maemo.org - Talk (https://talk.maemo.org/index.php)

- Nokia N9 / N950 (https://talk.maemo.org/forumdisplay.php?f=51)

- - overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.7] (https://talk.maemo.org/showthread.php?t=83357)

Re: overclocking kernel modules for PR1.2 [v1.4]

Tried this morning some tweaks and something is still weird . I was thinking the n9 may be unstable due to governor that changes often frequencies and voltages so I set the scale_min_freq same like scale_max_freq , so the cpu will stay at max everytime . I also tried to set governor to performance but phone freezes immediately when I set a higher frequency than 1360mhz .

Device is acting weird when I am doing these tweaks , it's very laggy and it sets a frequency after I change the scale_min_freq . I don't know how to explain better this situation , here's an example .

current speed is 1350mhz
set scale_min to 1400mhz
echo 1400mhz 1.4v to opptimizer
conky and everything else still showing 1350mhz
set scale_min to 800mhz (phone freezes)
set scale_min to 1400mhz (phone works but very laggy)
conky and everything else showing 1400mhz now

I can repeat these steps for any frequency , I also tried for 1700mhz and it worked , conky was showing 1700mhz but I know it's just a bug .

here's also a video of how device is acting after I pass the 1360mhz with the method presented above : http://www.youtube.com/watch?v=5H_bc_IkuOQ

Re: overclocking kernel modules for PR1.2 [v1.4]

As I read the previous post, I found everybody got a different voltage as default in their device, mine is 1.2v in default.

now i running 1.3Ghz at 1.375v with latest module, let see any reboot coming, in previous version I got a reboot after few times usage.

Thanks you Creamy Goodness

Re: overclocking kernel modules for PR1.2 [v1.4]

max 1,35ghz here, above that kabooom freeze and reboot

Re: overclocking kernel modules for PR1.2 [v1.4]

Quote:

Originally Posted by itsnotabigtruck (Post 1197522)

In my experience, foreign currency conversion fees are normally along the lines of 3%, not 3 EUR. On a donation of a few euros, the fee shouldn't be noticeable.

(I wonder if fears of currency conversion fees are the reason INCEPTION donations have been rather limited...)

In my case it's 2.5€+3%. Not a huge problem for big sum but for small sums it suxx a bit... :/(My bank is a real issue:/)

Re: overclocking kernel modules for PR1.2 [v1.4]

Quote:

Originally Posted by Creamy Goodness (Post 1197779)

yeah you can try this:

Paypal donate link

thanks :)

Btw I made some good progress today:
The symsearch module can now be unloaded so updating is easier. I added a warning screen to the UI that appears if you enter dangerously high values, just to make sure you don't do anything stupid by accident. I also fixed the problem with the voltage not returning to normal when you don't enter a custom voltage.
I only have one more thing to do before releasing this, I need to run the stability test in a separate thread so it doesn't prompt you to close the app when it's busy.

Nice :) Will do )

Re: overclocking kernel modules for PR1.2 [v1.4]

Hi

If i donate, can i test that app?

Re: overclocking kernel modules for PR1.2 [v1.4]

Quote:

Originally Posted by Dragoss91 (Post 1198082)

N9 seems to have a lot of secrets :D:D:D:D:D:D:D:D

Attachment 26015

this can't be true :s

Re: overclocking kernel modules for PR1.2 [v1.4]

donated. thnks for your work.

Re: overclocking kernel modules for PR1.2 [v1.4]

Another donation made from me. I really appreciate your work. :)

Re: overclocking kernel modules for PR1.2 [v1.4]

It's 99.9% done now, I will release the non-beta today. Only thing left that is needed is a transparent window to block you from messing with the UI while it is doing the benchmark. I couldn't get this working at 2am last night but it should be really easy now. I will update the first post with everything soon. Maybe a few hours because I'm at work.