Re: [Announce/WIP][Alpha] MeeCoLay - run Harmattan apps on Fremantle!
 

On FAM just tap the bar on the top where it says Faster Application Manager and tap View Log!

I hope it help.
Regards

Re: [Announce/WIP][Alpha] MeeCoLay - run Harmattan apps on Fremantle!
 

--- 2012-12-12 22:11:41 ---
/usr/bin/apt-get -q update -o Dir::Etc::sourcelist=/opt/fapman-cache/sources.list -o Dir::State::lists=/opt/fapman-cache/lists -o Dir::Etc::sourceparts=""
Hit http://repository.maemo.org fremantle-1.3 Release.gpg
Get:1 https://downloads.maemo.nokia.com ./ Release.gpg [198B]
Ign http://repository.maemo.org fremantle-1.3/free Translation-en_GB
Ign http://repository.maemo.org fremantle-1.3/non-free Translation-en_GB
Ign https://downloads.maemo.nokia.com ./ Translation-en_GB
Get:2 http://repository.maemo.org fremantle Release.gpg [489B]
Ign http://repository.maemo.org fremantle/free Translation-en_GB
Get:3 https://downloads.maemo.nokia.com ./ Release.gpg [198B]
Ign http://repository.maemo.org fremantle/non-free Translation-en_GB
Hit http://repository.maemo.org fremantle-1.3 Release
Ign https://downloads.maemo.nokia.com ./ Translation-en_GB
Get:4 http://repository.maemo.org fremantle Release [7958B]
Ign http://repository.maemo.org fremantle-1.3/free Packages/DiffIndex
Hit https://downloads.maemo.nokia.com ./ Release
Hit https://downloads.maemo.nokia.com ./ Release
Err https://downloads.maemo.nokia.com ./ Release

Ign http://repository.maemo.org fremantle-1.3/non-free Packages/DiffIndex
Get:5 https://downloads.maemo.nokia.com ./ Release [507B]
Err https://downloads.maemo.nokia.com ./ Release

Ign https://downloads.maemo.nokia.com ./ Release
Get:6 https://downloads.maemo.nokia.com ./ Release [507B]
Ign https://downloads.maemo.nokia.com ./ Release
Ign http://repository.maemo.org fremantle/free Packages/DiffIndex
Ign http://repository.maemo.org fremantle/non-free Packages/DiffIndex
Hit http://repository.maemo.org fremantle-1.3/free Packages
Ign https://downloads.maemo.nokia.com ./ Packages/DiffIndex
Hit http://repository.maemo.org fremantle-1.3/non-free Packages
Get:7 http://repository.maemo.org fremantle/free Packages [9201kB]
Ign https://downloads.maemo.nokia.com ./ Packages/DiffIndex
Hit https://downloads.maemo.nokia.com ./ Packages
Hit https://downloads.maemo.nokia.com ./ Packages
Get:8 http://repository.maemo.org fremantle/non-free Packages [283kB]
Fetched 9494kB in 1min12s (131kB/s)
Reading package lists...
W: GPG error: https://downloads.maemo.nokia.com ./ Release: The following signatures were invalid: KEYEXPIRED 1349249546 KEYEXPIRED 1349249546 KEYEXPIRED 1349249546
W: GPG error: https://downloads.maemo.nokia.com ./ Release: The following signatures were invalid: KEYEXPIRED 1349249546 KEYEXPIRED 1349249546 KEYEXPIRED 1349249546
W: Ignoring Provides line with DepCompareOp for package binutils
W: You may want to run apt-get update to correct these problems
--- 2012-12-12 22:13:31 ---
Start reading package lists
--- 2012-12-12 22:13:44 ---
Finished reading package lists
--- 2012-12-12 22:14:29 ---
/usr/bin/apt-get -qsy --allow-unauthenticated -o Dir::Etc::sourcelist=/opt/fapman-cache/sources.list -o Dir::State::lists=/opt/fapman-cache/lists -o Dir::Etc::sourceparts="" --auto-remove install meecolay
--- 2012-12-12 22:14:36 ---
Output from last process:
---
Reading package lists...
Building dependency tree...
Reading state information...
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
meecolay: Depends: libqtcore4 but it is not going to be installed
Depends: libqtgui4 but it is not going to be installed
Depends: libqtwebkit4 but it is not going to be installed
Depends: maemo-meegotouch-interfaces but it is not going to be installed
Depends: libqt4 but it is not going to be installed
E: Broken packages

Re: [Announce/WIP][Alpha] MeeCoLay - run Harmattan apps on Fremantle!
 

I guess you need cssu

Re: [Announce/WIP][Alpha] MeeCoLay - run Harmattan apps on Fremantle!
 

Is this one ?
http://my-maemo.com/software/applica...to=2133&faq=42

Re: [Announce/WIP][Alpha] MeeCoLay - run Harmattan apps on Fremantle!
 

You need cssu-testing ( i dont know if stable release will be enough as i didnt try it ! )
http://repository.maemo.org/communit...mantle.install
Please read the wiki to make sure you know what you are doing
http://wiki.maemo.org/CSSU

./Sifo

Re: [Announce/WIP][Alpha] MeeCoLay - run Harmattan apps on Fremantle!
 

hi dears............
how can i install meecolay fully?????
becuase it isnt in extras-devel catalog......
thank u........please answer me

Re: [Announce/WIP][Alpha] MeeCoLay - run Harmattan apps on Fremantle!
 

Do you mind reading the first post ? and maybe the wiki page too ?

Re: [Announce/WIP][Alpha] MeeCoLay - run Harmattan apps on Fremantle!
 

Any news on if this works with Wazzap???

Re: [Announce/WIP][Alpha] MeeCoLay - run Harmattan apps on Fremantle!
 

Kinda miffed at the whole thing and need help installing an N9 .deb package in xterm and then use meecolay and these are the steps I've taken so far...

1. sudo gainroot
2. cd MyDocs
3. dpkg -x package.deb /

after step 3 nothing happens...

a. specifically, what directory is that / pointing to?
b. since i'm running from MyDocs how will i type in the path to extract to?
c. I do recall marmistrz saying we shouldn't run apps as root...is this the same as "installing under gainroot" and then later calling meecolay opt/bin/ under the same "gainroot" permission?

please help...

Re: [Announce/WIP][Alpha] MeeCoLay - run Harmattan apps on Fremantle!
 

@Cozzbie

It is recommended to install the debian and not to extract it ( unless you know what you are doing and i dont think so. ! )
after installing the package with
you just need to move the icon and the desktop file to their correct directories as the dirs in fremantle are different in harmatten, and you need to modify the desktop file so the app can be used with meecolay
( please read the Workarounds wiki page about this part )

Answering you questions :
a. this way you will extract the deb in your opt/ and usr/ dirs, just like installing them but this way the control file ,postinst and postrm scripts wont be read by dpkg so you wont know what is exactly missing of dependencies
b. eg :
c. simply when you want to use dpkg or apt-get you are going to need root access
and when you want to launch an app with meecolay in terminal you should NOT use root or sudo gainroot just
now i guess i wrote a wiki page dont you think so :p ?
please read the wiki and the whole thread to avoid asking the same questions again...:cool:

./sifo

Edit : because the deb is extracted without any error so there wont be an output or something, which means you need to look for the binary and try it out !