Re: [Solved thanks to the great thedead 1440!!!] Nokia N9 Reboot Loop
 

here it is :


stefe@stefedi-HP:~/Downloads/n9$ sudo flasher -F DFL61_427.bin -F DFL61_EMMC_427.bin -f --flash-only=mmc
[sudo] password for stefe:
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 002, device address 006.
Device identifier: 3579*********** (SN: N/A)
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.427.6_PR_427
Sending ape-algo image (7103 kB)...
100% (7103 of 7103 kB, avg. 15341 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 002, device address 007.
Device identifier: 357923042085409 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.427.6_PR_427
Image cmt-2nd skipped
Image cmt-algo skipped
Image cmt-mcusw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image tar skipped
Image config skipped

Battery level 85 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] mmc [finished 100 % 261587 / 261587 kB 10734 kB/s]
Success




and


stefe@stefedi-HP:~/Downloads/n9$ sudo flasher -F DFL61_427.bin -f
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 002, device address 007.
Device identifier: 357923042085409 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.427.6_PR_427
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 85 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3157 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 2460 kB/s]
[x] rootfs [finished 100 % 1170254 / 1170254 kB 11100 kB/s]
Updating SW release
Success



No errors




thanks

stefe

Re: [Solved thanks to the great thedead 1440!!!] Nokia N9 Reboot Loop
 

So no errors and you are still in reboot loop?

If so, please do the commands as below in the mentioned order instead:

Re: [Solved thanks to the great thedead 1440!!!] Nokia N9 Reboot Loop
 

I have already done the erase-user-data, just not in secure mode.
And I have already done the second command as well.

I have left the N9 empty its battery, and recharged and tried again, to no avail...

It seems i will have to change phone soon.... pity

Re: [Solved thanks to the great thedead 1440!!!] Nokia N9 Reboot Loop
 

Done - no effect.

And RD mode is only half-functional, no wifi, some apps do not work.

Could it be faulty?

Re: [Solved thanks to the great thedead 1440!!!] Nokia N9 Reboot Loop
 

Hi there,

Could You Maybe give Me some advice? My N9 has switched off because of low battery power and when I tried to switch it on again after leaving it on charge for a while it just brings up the Nokia Logo with a wrench icon beneath it, then a yellow warning triangle with a message about software and it switches off again. I have tried to flash it in windows and linux but does not work because it is not detected by the USB?

I would appreciate any help to get this phone back to Life.

Re: [Solved thanks to the great thedead 1440!!!] Nokia N9 Reboot Loop
 

Hi when you plug it in for flashing, did you plug it in after the "Suitable device/phonenet not found" message appeared?

After plugging in what appears on your PC and Device?

Re: [Solved thanks to the great thedead 1440!!!] Nokia N9 Reboot Loop
 

I plugged it in after the message. Nothing happens on the PC nor the phone. Just stays at "Suitable device ......."

Re: [Solved thanks to the great thedead 1440!!!] Nokia N9 Reboot Loop
 

Before plugging it in can you press the power button on your device for 8-10 seconds to ensure it really is powered off...

Re: [Solved thanks to the great thedead 1440!!!] Nokia N9 Reboot Loop
 

I tried that, I even left thee phone for days, I stripped it apart completely, removed the battery, checked the IC's etc. Assembled it again. Just does the same..
I read somewhere that this is happening because apparently the Battery is flat and it is in RD Mode. But how do I get it out of RD Mode if the PC doesn't detect it. Even when I try to charge it with the normal charger, it does nothing at all.

Re: [Solved thanks to the great thedead 1440!!!] Nokia N9 Reboot Loop
 

One thing to check if your hardware doesn't have an issue is when you plug in a wall charger does the white LED blink?

If it doesn't it means your battery, usb port or something isn't connected properly... You may then need to re-check your hardware set-up or give it to Nokia Care...