GPE Calendar wont close, reboot required
 

I am running gpe-calendar 0.73-21 (as labeled in the application manager), running the firmware before the latest (I have SDHC cards and the latest firmware appears to create problems for these cards, so I haven't updated to the latest firmware version) and when I close the calendar I get a dialog box with the text "library routine called out of sequence" and an OK button. Pressing the OK button only brings up the same diaglog box, endlessly. I have to reboot the tablet in order to get control back. Is this a version update issue? If there is a newer version of this app, and I don't have the latest firmware loaded, will it work?

Re: GPE Calendar wont close, reboot required
 

which version of the calendar are you using. I tried to install the newest (experimental) one by accident and it did something similar.

Re: GPE Calendar wont close, reboot required
 

I find these varioius GPE repositories very confusing, I never know which one to use.

The GPE Calendar I have installed is shown in application manager as 2.7+maemo+svn20070728-1 and comes from here http://linuxtogo.org/~florian/maemo/index.html

Anyway, it won't close either and I am on the latest firmware.

Re: GPE Calendar wont close, reboot required
 

If you press OK enough times, it will close -- I think my highest count was 72 (or something like that). Seriously.

Anyway, I:

1. Installed Emerinig: http://maemo.org/downloads/product/erminig/
2. Synced my GPE Calendar to my Google Calendar.
3. Uninstalled GPE Calendar and deleted all of the GPE Calendar-related files.
4. Reinstalled GPE Calendar (you'll have to start it once to create a new GPE Calendar database).
5. Ran Erminig to get my Google Calendar stuff back to GPE Calendar.

...and I haven't had this issue since.

Hope this helps.

Tim

Re: GPE Calendar wont close, reboot required
 

____________________________________________
770 2006 OS boot from MMC

I have a similar problem, the other way round, the calender close without warning after opening up agenda. I am also running gpe-calender .73-21. Anybody experience the same thing?



bun:(

Re: GPE Calendar wont close, reboot required
 

I take that back... I just went back to view my schedule in March and when I tried to close GPE Calendar, it triggered the error again. Hmmm...

Anyway, if you just continue to click the square hardware button until it closes.

-T.

Re: GPE Calendar wont close, reboot required
 

You have to go to menu/close to have it close the first time. Not the x. Works every time (for me).

Re: GPE Calendar wont close, reboot required
 

Isn't it supposed to stay open to be able to notify any alarms you have set?

Ton.

Re: GPE Calendar wont close, reboot required
 

Yes, that what I found.

Re: GPE Calendar wont close, reboot required
 

So far as I can tell, I have no alarms set.

However Menu/Close does the trick, thanks for that.

Re: GPE Calendar wont close, reboot required
 

Actually, using Menu/Close is the way I have found to close it, as X just closes the window and doesn't shut the Calendar down. I want to close it down so that the application is not running at all, so Menu/close is the only way I have found. Also, I spent 15 minutes hitting the OK button and it never did shut down.

Re: GPE Calendar wont close, reboot required
 

Menu/Close does Quit GPE Calendar (the [x] purposely minimizes the Calendar so that Alarms will work), but Quitting is what triggers the "libroutine" error, not minimizing.

-T.