maemo.org - Talk
Page 49 of 205 « First 394748 49 505159 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   SailfishOS (https://talk.maemo.org/forumdisplay.php?f=52)
-   -   Porting Sailfish to N9 (https://talk.maemo.org/showthread.php?t=90761)

rainisto 2013-12-09 07:33
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by flotron (Post 1393881)
So simlocked n9s can't install Sailfish. Even if you unlock it after contract. Must be factory unlocked

Can anyone confirm this?
Are you sure that that the device doesnt have devicelock enabled? As that one prevents doing to open mode also (and has the same error message on flasher). 1st you need to disable devicelock and then you can go to open mode.

Alecsandru 2013-12-09 07:33
Re: Porting Sailfish to N9 (or other)
 
how about n900?

rainisto 2013-12-09 07:36
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by flotron (Post 1393871)
after using


I still get "Simlock ON: cannot flash unsigned image"

So this is the end of my adventures with Sailfish and n9?
erase-mmc should not be needed as erase-user-data also erases mmc partition, flasher might get confused as you are trying to erase mmc two times in same command so:

flasher -f -F main.bin --erase-user-data=secure -F emmc.bin

And make sure that you dont have devicelock enabled in the harmattan.

flotron 2013-12-09 07:41
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by rainisto (Post 1393906)
erase-mmc should not be needed as erase-user-data also erases mmc partition, flasher might get confused as you are trying to erase mmc two times in same command so:

flasher -f -F main.bin --erase-user-data=secure -F emmc.bin

And make sure that you dont have devicelock enabled in the harmattan.
I'm very sure no device lock.

I get "Simlock ON: cannot flash unsigned image" when i try to:

flasher -a main.bin -k zImage_2.6.32.54-openmode_l2fix --flash-only=kernel -f -R

rainisto 2013-12-09 07:42
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by plourde (Post 1393754)
I have tried to reflash to factory since i messed up and after the moslo kernel was installed since the partition is different I am having issues reflash since there is a mismatch how can i fix this

Partition table mismatch (start=112672768, sum=104480768). You may want to use the no-preserve option or flash an erase image

thank you
Most of the people here just point to you to generic flashing instructions that unfortunately wont help you. You should just do what the error message tells you to do.

ADD "--no-preserve" to your flashing command, that will repartition the device for you. Normal flashing instructions fail to mention this.

rainisto 2013-12-09 07:47
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by flotron (Post 1393908)
I'm very sure no device lock.

I get "Simlock ON: cannot flash unsigned image" when i try to:

flasher -a main.bin -k zImage_2.6.32.54-openmode_l2fix --flash-only=kernel -f -R
Then your out of luck, since the only occasion when ""Simlock ON: cannot flash unsigned image" error is supposed to come is:

a) operator sim lock is not unlocked properly

b) end user has set devicelock code for example from default empty string to "12345"(or whatever) and they have forgotten to clear it back to default empty string with --erase-user-data=secure when they have reflashed the default factory image for secure mode.

So if flashing back to normal secure mode with:
"flasher -f -F main.bin -F emmc.bin --no-preserve --erase-user-data=secure" doesn't solve the problem, then you are stuck with Harmattan.

flotron 2013-12-09 07:51
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by rainisto (Post 1393910)
Then your out of luck, since the only occasion when ""Simlock ON: cannot flash unsigned image" error is supposed to come is:

a) operator sim lock is not unlocked properly

b) end user has set devicelock code for example from default empty string to "12345"(or whatever) and they have forgotten to clear it back to default empty string with --erase-user-data=secure when they have reflashed the default factory image for secure mode.

So if flashing back to normal secure mode with:
"flasher -f -F main.bin -F emmc.bin --no-preserve --erase-user-data=secure" doesn't solve the problem, then you are stuck with Harmattan.
The phone is unlocked (not factory unlocked)

Well... i have a nice harmattan clock now :mad:

billranton 2013-12-09 08:09
Re: Porting Sailfish to N9 (or other)
 
You could try setting the lock code from harmattan, then setting it to an empty string?

flotron 2013-12-09 08:14
Re: Porting Sailfish to N9 (or other)
 
No lockcode, is simlock

nieldk 2013-12-09 08:29
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by flotron (Post 1393913)
No lockcode, is simlock
Wow, this is something to dig into, ....
hopefully a solution can be found for this situation

one thing, dont really think its an issue, but, have you enabled a SIM PIN Code?


All times are GMT. The time now is 04:20.
Page 49 of 205 « First 394748 49 505159 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8