maemo.org - Talk
Page 30 of 52 « First 202829 30 313240 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   SailfishOS (https://talk.maemo.org/forumdisplay.php?f=52)
-   -   Porting Sailfish to N9 (https://talk.maemo.org/showthread.php?t=90761)

eldoraado 2013-12-30 18:05
Re: Porting Sailfish to N9 (or other)
 
Where is the corner for the N9 port. Or is it only the current topic for it. I can lend a hand for testing. Have N950 and a N9 to spare. Already have my hand on the original Jolla :P

taixzo 2013-12-30 18:50
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by ZLooM (Post 1402123)
I noticed that when the phone is on the table to scroll complicated. When the phone is in my hand to scroll easier. Tested on "Store".

Sorry my bad English.
This is because if the phone is not in your hand the touchscreen is not grounded. Sailfish seems slightly more sensitive to this, but the same bug is present in Meego; if you're not touching the case it's hard to make the touch input react.

ZLooM 2013-12-30 18:59
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by taixzo (Post 1402186)
This is because if the phone is not in your hand the touchscreen is not grounded. Sailfish seems slightly more sensitive to this, but the same bug is present in Meego; if you're not touching the case it's hard to make the touch input react.
wow! I did`t know this. Thant you.

Ta76eem 2013-12-30 20:47
Re: Porting Sailfish to N9 (or other)
 
I have one question .. I flashed nitdroid kernel .. then flashed moslo kernel .. is it it ok to install ubiboot ( sailfish version ) .. and then install sailfish ??

juiceme 2013-12-30 21:57
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by Ta76eem (Post 1402241)
I have one question .. I flashed nitdroid kernel .. then flashed moslo kernel .. is it it ok to install ubiboot ( sailfish version ) .. and then install sailfish ??
Yes, that's OK. Altough, the sailfish-preconfigured ubiboot does not have the Nitdroid menu, only Harmattan and Sailfish.

mikecomputing 2013-12-30 22:20
Re: Porting Sailfish to N9 (or other)
 
Its kinda ironic when people use they'r time to try to get android layer work in sailfishos on n9.

When the time better be used to make dialer hangs and swapped landscape bugs fixed and gps working instead.....

flip1199 2013-12-31 04:55
Re: Porting Sailfish to N9 (or other)
 
How do I add this?

Quote:
Originally Posted by max83 (Post 1401332)
Add this to ur /etc/ssu/ssu.ini file

[General]
arch=armv7hl
configVersion=12
credentials-scope=sales
credentials-ttl=1800
credentials-url-store=https://store-repository.jolla.com
deviceMode=4
disabled-repos=adaptation1, thirdparty, adaptation0
domain=sales
enabled-repos=aliendalvik
flavour=release
home-url=https://dav.jollamobile.com/dav/home/%1/
initialized=true
registered=false
release=1.0.1.12
rndRelease=latest

[repository-urls]
aliendalvik=https://store-repository.jolla.com/releases/latest/aliendalvik/SbJ
limited-nemo-mw=http://repo.merproject.org/obs/home:/vgrade:/branches:/nemo:/devel:/mw/latest_armv7hl/
nemoadaptation0=http://repo.merproject.org/obs/nemo:/devel:/hw:/ti:/omap3:/n9xx-common/latest_armv7hl/
nemoadaptation1=http://repo.merproject.org/obs/nemo:/devel:/hw:/ti:/omap3:/n950-n9/latest_armv7hl/
store=https://store-repository.jolla.com/SbJ/armv7hl/


and then type this:
ssu ur
now ull have to see the if they are take effect or not
so type:
ssu lr
if you can see the results accordingly which tells u that u added the store-repository then u are good to go for store

goodluck

kibet85 2013-12-31 05:15
Re: Porting Sailfish to N9 (or other)
 
has anyone managed to restart tracker and show harmattan pictures on sailfish..

Ta76eem 2013-12-31 05:43
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by juiceme (Post 1402274)
Yes, that's OK. Altough, the sailfish-preconfigured ubiboot does not have the Nitdroid menu, only Harmattan and Sailfish.
so no need to flash the openmode kernel ?

taixzo 2013-12-31 05:48
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by kibet85 (Post 1402349)
has anyone managed to restart tracker and show harmattan pictures on sailfish..
I just connected to computer over USB and unplugged, and they showed up.

max83 2013-12-31 06:15
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by flip1199 (Post 1402345)
How do I add this?
flip, you must have installed nano or you can simply open this path in ur nautilus and put them there
remember to open nautilus by issuing sudo
sudo nautilus
and then goto /etc/ssu/
now u can see the ssu.ini file open it with any text editor and change all inside to the one I posted

kibet85 2013-12-31 06:42
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by taixzo (Post 1402353)
I just connected to computer over USB and unplugged, and they showed up.
u did it on the N9 port...

juiceme 2013-12-31 07:36
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by Ta76eem (Post 1402352)
so no need to flash the openmode kernel ?
You need to be in Open Mode before you install any of these. If you already have Nitdroid kernel, yes, that is also an Open Mode kernel.

romu 2013-12-31 09:25
Re: Porting Sailfish to N9 (or other)
 
Hi,
I started with a fresh install of the vgrade R4 image before christmas, and updated my N9 to 1.0.2.5 yesterday. I noticed now the wifi connection is far less robust than it was before the upgrade. When it falls, no way to restore the connection with ifconfig, wlan0 doesn't even appear in the terminal ! Anyone to confirm?

For few weeks now, my provider offers me some 3G connectivity. I tested on Harmattan, it works. But no way to make it work with Sailfish. If I go to the settings -> mobile network, I always see "Internet unactivated" (or "disabled", I don't run an English GUI).

Roaming to set to "always allow"
Network mode is set to "Preferred 3G"
And the network choice is set to "automatic".

On the Sailfish home screen I see 3G or 3.5G, but no way to connect the web.

Any idea how to debug this? Does 3G work for you?

coderus 2013-12-31 09:30
hold on internet connection and enter apn settings

romu 2013-12-31 09:42
Re: Porting Sailfish to N9 (or other)
 
Thanks. Some progresses...kind of :-p

After setting the APN, I can now choose between wifi and mobile data connection. If I choose this later one, I get "Connection problem".

Anyway, not a big deal, I can live without 3G.

EDIT: It works now! Thanks Coderus.

Nad 2013-12-31 14:31
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by kibet85 (Post 1402349)
has anyone managed to restart tracker and show harmattan pictures on sailfish..
Harmattan's MyDocs are not mounted in Sailfish by default. You can edit ftsab to mount the partition then use symlinks to view Harmattan files. Otherwise, you could try to edit the tracker config files to read Harmattan contents. Have a look at the wiki page for more info.

k6ps 2013-12-31 14:39
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by romu (Post 1402395)
...
Does 3G work for you?
Yes, works for me on vgrade_r4 image, but i had to set it up manually, as @coderus pointed out.

k6ps

taixzo 2013-12-31 15:04
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by Nad (Post 1402513)
Harmattan's MyDocs are not mounted in Sailfish by default. You can edit ftsab to mount the partition then use symlinks to view Harmattan files. Otherwise, you could try to edit the tracker config files to read Harmattan contents. Have a look at the wiki page for more info.
Right, I forgot I had done that step.

Ta76eem 2013-12-31 15:34
Re: Porting Sailfish to N9 (or other)
 
when flashing the moslo kernel :
ERR: Re-partitioning failed! No partition created
..(using Windows)

coderus 2013-12-31 15:56
Re: Porting Sailfish to N9 (or other)
 
telnet to moslo and read log

Ta76eem 2013-12-31 16:51
Re: Porting Sailfish to N9 (or other)
 
how to telnet to moslo ??

Ta76eem 2013-12-31 18:39
Re: Porting Sailfish to N9 (or other)
 
how to delete the moslo kernel .. So I can flash it again.. ??

juiceme 2013-12-31 21:19
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by Ta76eem (Post 1402615)
how to delete the moslo kernel .. So I can flash it again.. ??
No need to delete it, unless you flashed it persistently to MTD :D

Ta76eem 2014-01-01 09:31
Re: Porting Sailfish to N9 (or other)
 
do how to flash it using Windows ??

Ta76eem 2014-01-01 09:32
Re: Porting Sailfish to N9 (or other)
 
I always get this error
Quote:
Originally Posted by Ta76eem (Post 1402539)
when flashing the moslo kernel :
ERR: Re-partitioning failed! No partition created
..(using Windows)

nieldk 2014-01-01 09:45
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by Ta76eem (Post 1402696)
I always get this error
happended here also, running the flasher a second time fixed it.

Ta76eem 2014-01-01 10:33
Re: Porting Sailfish to N9 (or other)
 
flashed 3 times ... With same error appears

aQUICK1 2014-01-01 10:38
Re: Porting Sailfish to N9 (or other)
 
Maybe rerun flasher under adm and w7 32?

Ta76eem 2014-01-01 11:05
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by aQUICK1 (Post 1402704)
Maybe rerun flasher under adm and w7 32?
That's already what I did ..
but still getting the same error...

Hurrian 2014-01-01 11:40
Re: Porting Sailfish to N9 (or other)
 
Should this be added to the Sailfish N9 adaptation config?

/etc/fstab
Code:
/dev/mmcblk0p1 /home/nemo/MyDocs vfat noauto,nodev,noexec,nosuid,noatime,nodiratime,utf8,uid=29999,shortname=mixed,dmask=000,fmask=0133,rodir 0 0
/etc/usb-moded/dyn-modes/mass_storage.ini
Code:
[mode]
name = mass_storage
module = g_file_storage
mass_storage = 1

[mountpoints]
mount = /dev/mmcblk0p1

[sync]
nofua = 1

[altmount]
mount = /home/nemo/MyDocs
What this does:
Adds MyDocs to Sailfish

willi6868 2014-01-02 10:57
Re: Porting Sailfish to N9 (or other)
 
Is it possible to activate and use LPM-screen on N9 running Sailfish image? :rolleyes:

Ta76eem 2014-01-02 11:09
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by coderus (Post 1402545)
telnet to moslo and read log
Flashed moslo kernel I get

Code:
Welcome to MOSLO vNEMO_MOSLO-N9_0.0.13.2
check  wiki,merproject.org/wiki/Nemo

Waiting for eMMC devic. . .
Repartitoning MMC for AlternateOS .
Do not unplug USB or poweroff the device!!!
ERR: Re-partitioning failed! No partition created.

You can telnet into 192.168.2.15

juiceme 2014-01-02 11:49
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by Ta76eem (Post 1402978)
Flashed moslo kernel I get

Code:
Welcome to MOSLO vNEMO_MOSLO-N9_0.0.13.2
check  wiki,merproject.org/wiki/Nemo

Waiting for eMMC devic. . .
Repartitoning MMC for AlternateOS .
Do not unplug USB or poweroff the device!!!
ERR: Re-partitioning failed! No partition created.

You can telnet into 192.168.2.15
Most of time people get the partitioning error is because there's not enough space in your MyDocs partition. You might want to save your stuff and delete files from there....

Ta76eem 2014-01-02 12:04
Re: Porting Sailfish to N9 (or other)
 
shouldn't it be 4gb free in MyDocs .. I already have 4.2GB free ?

juiceme 2014-01-02 12:24
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by Ta76eem (Post 1402993)
shouldn't it be 4gb free in MyDocs .. I already have 4.2GB free ?
That's WAY too tight :D

Ta76eem 2014-01-02 12:24
Re: Porting Sailfish to N9 (or other)
 
deleted the whole DCIM file .. and not it worked .. Thanks a lot :)
..
I installed ubiboot before flashing the Moslo Kernel succesfully ..
re-install ubiboot or no need ??

juiceme 2014-01-02 12:50
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by Ta76eem (Post 1402998)
deleted the whole DCIM file .. and not it worked .. Thanks a lot :)
..
I installed ubiboot before flashing the Moslo Kernel succesfully ..
re-install ubiboot or no need ??
If you used the MOSLO kernel like it should be used, just booting it with flasher and not doing permanent flashing, then there is no need to reflash ubiboot kernel, it'll be there just like it was before using MOSLO. :)

liar 2014-01-02 14:46
Re: Porting Sailfish to N9 (or other)
 
Quote:
Originally Posted by juiceme (Post 1401663)
It won't work, believe me, you just cannot use random modules off a different kernel even if you turned off the modversions checking.
It is futile, it just will not work.
thats why we should focus on the 3.5.3 kernel, the module works on the 3.5.3 kernel

but mysatroker isn't the actual issue why aliendalvik doesn't work: it's only used for sound and such. aliendalvik will probably even work without it. the real issues are hwcomposer and gralloc

muscat.lover 2014-01-02 21:25
Re: Porting Sailfish to N9 (or other)
 
Hello guys
I hope you can help
I'm trying to install a Sailfish OS on Nokia N9 using Windows
Using these steps

.......................................

DOWNLOAD FILES
=============
1.flashware for N9 from here
http://mrcrab.net/nokia/Nokia_N9.htm...uctType=RM-696

2.flasher for windows from here
http://skeiron.org/tablets-dev/maemo...her_3.12.1.exe

3.OpenMode Kernel from here
http://www.swagman.org/juice/ubiboot...openmode_l2fix

4.Moslo Kernel from here http://www.multiupload.nl/WLLK09RF96

5.Ubiboot specially for sailfish from here http://www.swagman.org/juice/ubiboot...31213_SFOS.tar

6.Sailfish Image from here
http://n9.araya.su/images/mic_images...ish_r3.tar.bz2

INSTALLATION FLASHER
================
7.Backup all your mobile data.

8.Rename N9 flashware files as emmc.bin and main.bin

9.Install flasher on your windows C:\Program Files\Nokia\Flasher

10.Copy all N9 flashware files including emmc.bin & main.bin in C:\Program Files\Nokia\Flasher

11.connect mobile with computer and open CMD (command prompt) in windows as administrator

12.type cd C:\Program Files\Nokia\Flasher

13.type flasher –i (your mobile will restart)

14.flash you firmware with this command flasher -f -F main.bin --erase-user-data=secure -F emmc.bin --erase-mmc=secure

15.after 10 15 minutes the phone should proceed to flash normally.

INSTALLATION OPENMODE KERNEL
=======================
16.put openmode kernel file in directory C:\Program Files\Nokia\Flasher

17.Now in cmd flasher window type flasher -a main.bin -k zImage_2.6.32.54-openmode_l2fix --flash-only=kernel -f –R

18.The phone should proceed to flash normally.

19.In your phone enable developer mode –settings-security-developer mode , Phone will bootup again

INSTALLATION MOSLO KERNEL
====================
20.Now copy Moslo Kernel files in directory C:\Program Files\Nokia\Flasher

21.And run this command flasher -k zImage-moslo -n initrd-moslo -l -b , Again phone will restart and some green color coding will run on mobile

22.Once it complete disconnect the phone and restart mobile normally

INSTALLATION UBIBOOT
================
23.Now extract and copy all Ubiboot files in directory C:\Program Files\Nokia\Flasher

24.Also copy these ubiboot files in your N9 MyDocs folder

25.Go to terminal in your mobile and type
devel-su
cd /home/user/MyDocs/
tar -xvf ubiboot_035_sailfishos.tar -C /

26.Now in computer flasher window type this command
flasher -a main.bin -k zImage_2.6.32.54-ubiboot-02_301013 --flash-only=kernel -f –R

27. phone should proceed to flash normally

INSTALLATION SAILFISH
================
28.Rename sailfish image file as sailfish.tar.bz2

29.Copy this sailfish.tar.bz2 file in your mobile MyDocs

30.Open Terminal in mobile and type
devel-su
rootme
cd /home/user/MyDocs/
mkdir /sailfish
mount /dev/mmcblk0p4 /sailfish
tar --numeric-owner -xvjf sailfish.tar.bz2 -C /sailfish/
sync

Now restart your mobile and in selection menu select sailfish



************************************************** **********

But there was a problem that my phone does not fail in the installation developer mode and I have tried a lot

I wish I could advise me a way to work with Windows (without using Terminal on the phone)


All times are GMT. The time now is 23:36.
Page 30 of 52 « First 202829 30 313240 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8