![]() |
Re: Porting Sailfish to N9 (or other)
Quote:
Best thing of course is if you already are running in open mode, then you do not need to do anything that would erase your current Harmattan installation, as you only need to make sure there's enough space on MyDocs to carve out the sailfish partition. If you are not in open mode, well, you can do it, but it requires some manual tweaking to not lose your data, as you need to back up your partitions and do some selective restoring after you have gone to clean open mode. Or, if you do not care for clean open mode, (like, you will have the "scary warning" and maybe some instability of some applications) you do not need to do any clean reflashing, it is possible to install ubiboot on your system just as is. |
Re: Porting Sailfish to N9 (or other)
Quote:
I think there were some progress with camera+ something... |
Re: Porting Sailfish to N9 (or other)
afaik nobody working on N9 sailfish adaptation
|
Re: Porting Sailfish to N9 (or other)
probably not! :(:( Licenses and kernel block progress
|
Re: Porting Sailfish to N9 (or other)
Sorry if this has already been tackled - but the Flasher v3.12.1 is no longer available on the wiki. The link posted is dead.
Is there somewhere else I can get this? |
Re: Porting Sailfish to N9 (or other)
@afaq
I just had a quick look over at filecrop.com. Plenty of download links available there, though most of them seem Windows versions. Of course it's not an official site, so a virus scan is advised. |
Re: Porting Sailfish to N9 (or other)
|
Re: Porting Sailfish to N9 (or other)
Thank you both. Much appreciated.
|
Re: Porting Sailfish to N9 (or other)
break news:"Hi, there are licensing issues with N9's hardware adaptation, and Wayland on the N9 is not so good. But stay tuned!" says jollaHQ
|
Re: Porting Sailfish to N9 (or other)
Jolla HQ says no as well ;)
https://twitter.com/jucato/status/436832029921918977 |
Re: Porting Sailfish to N9 (or other)
Quote:
|
Re: Porting Sailfish to N9 (or other)
Quote:
|
Re: Porting Sailfish to N9 (or other)
Quote:
|
Re: Porting Sailfish to N9 (or other)
Hi everyone. Today I finally got my N9 flashed with ubiboot for Sailfish/Harmattan using these http://wiki.maemo.org/Sailfish with linux.
Now ubiboot starts and shows Sailfish, Harmattan and ubiboot info icons. If I tap Harmattan, phone shuts. If I tap Sailfish, it starts with welcome screen. Then I have to select language and in next screen confirm language. After that "please wait" screen appears for then seconds and it starts over again. Other people seem to have same problem but I didn't find any solution for it.. |
Re: Porting Sailfish to N9 (or other)
harmattan. you missed preinit files for ubiboot
sailfish. you need to tap accept button to continue |
Re: Porting Sailfish to N9 (or other)
Quote:
|
Re: Porting Sailfish to N9 (or other)
not unpacked preinits package. or missed executable bits for files.
|
Re: Porting Sailfish to N9 (or other)
Quote:
|
Re: Porting Sailfish to N9 (or other)
Quote:
That package should contain the preinits already, so unless you made some problem in installinf the package, you should be OK with that. Now, if you have boot problems, connect the device to a PC with USB cable and start ubiboot. On boot it will enter maintanance mode where the partitions on the device are exported to the PC as USB drives. If you have a linux computer, you will see all the drives, if a windows computer, then you will only see MyDocs (which is vfat) Now, do that, and look for the ubiboot log files, which will tell you what is your problem. The log file is /MyDocs/boot/ubiboot.log |
Re: Porting Sailfish to N9 (or other)
Nokia X runs Android, Sailfish will run on Android devices. Will Sailfish run on Nokia X? Just wondering.
|
Re: Porting Sailfish to N9 (or other)
will work as soon as CM 10.1 arrive to Nokia X
|
Re: Porting Sailfish to N9 (or other)
It's funny that Nokia X has bigger chance to get a fully working Sailfish OS than Nokia N9 which was always considered more open comparing to other handsets.
|
Re: Porting Sailfish to N9 (or other)
Quote:
Nokia X has probadly newer Qualcom something with better GPU than N9 with 5 year old HW. N9 Omap GFX driver is old and X11 only. I guess Qt5/QtQuick2 and Wayland is using OpenGL more heavily than N9 did and depends on good better 3D GFX HW drivers. There seems to be same issue with mer kernel adaptions for Qt5/Wayland for beaglebone black (anyone knows if there exist any mer/nemo/sail kickstart files for beaglebone black btw?) it has almost same GFX as N9 if I remember correct. |
Re: Porting Sailfish to N9 (or other)
This is by far the best jolla thread. Keep up the great work! GJ Love sail on n9 even if its far from perfect.
|
Re: Porting Sailfish to N9 (or other)
I think there shouldn't be put that much effort in porting sailfish to N9.
If the orientation and the camera will not be fixed, who will use it as day-by-day phone (is anybody that uses now n9 with sailfish?) Then is the GPS, Android interface, etc. There is the sailfish theme which gives a flavour, is that one that could be improved eventually :). N9 is a phone beautiful as it is, i see no way you could improve it without too much effort. We love it, we don't want it to die, but that's it, it's already quite old, jolla is the future. Moreover, in the near future sailfish will be fully functional on android phones, this is the thing Jolla team is working on. |
Re: Porting Sailfish to N9 (or other)
How good will Sailfish run on android devices? will sailfish run on any android device? thank you for your answer.
|
Re: Porting Sailfish to N9 (or other)
Sailfish can be runned on android with CM10.1 capability
|
Re: Porting Sailfish to N9 (or other)
Quote:
|
Re: Porting Sailfish to N9 (or other)
Quote:
AFAIK the lowlevel N9 camdriver is there. But the jollaapp "depends" on android via libhybris camera drivers and N9 depends core linux driver. But both uses gstreamer but different sinks if I understand it correct... Some who know this better should clarify. But to me it sounds like cameraplus is something to look at? Cameraplus was inititial for harmattan but seems to have some uknown state sailfishport. I tried compile some month ago, but failed. but did not investigate why it failed... go check it :) |
Re: Porting Sailfish to N9 (or other)
|
Quote:
|
Re: Porting Sailfish to N9 (or other)
Quote:
|
Re: Porting Sailfish to N9 (or other)
Pointless. Besides, even Sailfish is not working properly and drivers for Windows would have to be written from scratch.
|
Re: Porting Sailfish to N9 (or other)
Quote:
(or any device in general, that is...) :D |
Re: Porting Sailfish to N9 (or other)
Quote:
Load the Beagle BSP with u-boot and you're golden. |
Re: Porting Sailfish to N9 (or other)
Quote:
|
Re: Porting Sailfish to N9 (or other)
hehe. Mike is always so smooth and gentle.
|
Re: Porting Sailfish to N9 (or other)
Quote:
|
Re: Porting Sailfish to N9 (or other)
the new mer image has been uploaded in mer project website they claim that they fixed the OHM issues
2014-02-24 fixed ohm-* missing dependency refer here |
Re: Porting Sailfish to N9 (or other)
Any status on getting 1.0.3.8 running on the N9? So far it's been fairly quiet.
|
| All times are GMT. The time now is 23:47. |
vBulletin® Version 3.8.8