maemo.org - Talk
Page 26 of 81 « First 162425 26 272836 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   The Other Half (https://talk.maemo.org/forumdisplay.php?f=59)
-   -   Producing Qwerty OtherHalf --order counter: 75/75 --ordering closed (https://talk.maemo.org/showthread.php?t=91535)

Henque19 2014-01-06 15:57
Re: Building OtherHalf keyboard prototype --exciting times! last call to jump in and help!
 
Great work!
Dirkvl, I've got €30 heading your way.

I'm probably not the only one, but I do have a 3D-printer and limited modelling skills so when you're at the prototyping stage I can lend a hand.

dirkvl 2014-01-06 19:06
Re: Building OtherHalf keyboard prototype --exciting times! last call to jump in and help!
 
At the moment I am at the point that I'm confident that the software side will work -thanks to kimmoli!- so it is time to design and order some pcb's.

3D printer would be practical, but forthe first prototype it will probably better to have one available nearby! :)

kimmoli 2014-01-06 19:09
Re: Building OtherHalf keyboard prototype --exciting times! last call to jump in and help!
 
Quote:
Originally Posted by dirkvl (Post 1404339)
3D printer would be practical, but forthe first prototype it will probably better to have one available nearby! :)
I use Felix printer (http://shop.felixprinters.com/workshop.html) and assume their hq is at least in your country ??

dirkvl 2014-01-06 19:14
Re: Building OtherHalf keyboard prototype --exciting times! last call to jump in and help!
 
my faculty has three 3d-printers, so will probably try that first when I have a design made

HtheB 2014-01-07 00:26
Re: Building OtherHalf keyboard prototype --exciting times! last call to jump in and help!
 
what about integrating the oled screen hack in the keyboard?
would that be possible?

Akkumaru 2014-01-07 07:51
Possible but more work i guess? :p

gordon_pcb_designer 2014-01-07 07:59
Re: Building OtherHalf keyboard prototype --exciting times! last call to jump in and help!
 
Hi to all guys,
I'm following the great job you all are making here and i've to say i admire you so much ;) as i don't understand a lot about programming and so.. but in case you'll need an hand for design a pcb or so, i'm here! ;)
Anyway, is very stimulating to follow you!! go ahead!!

dirkvl 2014-01-07 08:05
Re: Building OtherHalf keyboard prototype --exciting times! last call to jump in and help!
 
Quote:
Originally Posted by HtheB (Post 1404411)
what about integrating the oled screen hack in the keyboard?
would that be possible?
everything is possible! but no.

Quote:
Originally Posted by gordon_pcb_designer (Post 1404448)
Hi to all guys,
I'm following the great job you all are making here and i've to say i admire you so much ;) as i don't understand a lot about programming and so.. but in case you'll need an hand for design a pcb or so, i'm here! ;)
Anyway, is very stimulating to follow you!! go ahead!!
Maybe, good with error checking gerber files? :)

gordon_pcb_designer 2014-01-07 08:29
Re: Building OtherHalf keyboard prototype --exciting times! last call to jump in and help!
 
Quote:
Originally Posted by dirkvl (Post 1404451)
everything is possible! but no.



Maybe, good with error checking gerber files? :)
Yes if you need that, I normally use Cam350..

EDIT: it seems i can't send you private messages, i suppose due my few post here.. if you're pleased you could try to message me, hope i'll be able to answer at least and share the way you want use to send me needed files to check and so.. anyway I'm here waiting news :)

matimilko 2014-01-08 18:35
Re: Building OtherHalf keyboard prototype --exciting times! last call to jump in and help!
 
Quote:
Originally Posted by dirkvl (Post 1404339)
At the moment I am at the point that I'm confident that the software side will work -thanks to kimmoli!- so it is time to design and order some pcb's.

3D printer would be practical, but forthe first prototype it will probably better to have one available nearby! :)
First thank You for great work on TOH keyboard!
I don't know much about programming, but if can help on hardware, making keyboard and mechanism for I can try.
On TOH isn't much space to make some good mechanism like on N97, I think slide out is only possible and of course we all want thin keyboard.
Connection should be over cables?


All times are GMT. The time now is 00:55.
Page 26 of 81 « First 162425 26 272836 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8