maemo.org - Talk
Page 48 of 81 « First 384647 48 495058 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   The Other Half (https://talk.maemo.org/forumdisplay.php?f=59)
-   -   Producing Qwerty OtherHalf --order counter: 75/75 --ordering closed (https://talk.maemo.org/showthread.php?t=91535)

dirkvl 2014-02-02 19:52
Re: [WIP] Producing Qwerty OtherHalf --pre-ordering started! --order counter:49 --video in first post
 
So, did some tests with the current dummy-model. I glued the flex-cable in place -since the pcb's are not yet here- to check whether it performs good enough. And guess what, it totally does!

http://www.globalconnectortechnology...sage-guide.jpg

This was one of the last crucial point in the design what could have been a problem, but the 'Premo Flex' cable manages to bend the 1.5mm radius and seems not to add extra resistance in the slide&tilt movement.

Pics? Not yet.. The last video may have been a bit blurry on purpose! :p This wednesday maybe a more elaborate video when the 2nd revision model comes in!

bennypr0fane 2014-02-04 01:54
Re: [WIP] Producing Qwerty OtherHalf --pre-ordering started! --order counter:51 --video in first post
 
That video is really blurry and extra short. Can you maybe do a little better? It hardly gives me a better idea of what your TOH looks like than the image in the 1st post

dirkvl 2014-02-04 15:13
Re: [WIP] Producing Qwerty OtherHalf --pre-ordering started! --order counter:51 --video in first post
 
Quote:
Originally Posted by bennypr0fane (Post 1410771)
That video is really blurry and extra short. Can you maybe do a little better? It hardly gives me a better idea of what your TOH looks like than the image in the 1st post
2 cm above your post:

Quote:
Originally Posted by dirkvl (Post 1410507)
Pics? Not yet.. The last video may have been a bit blurry on purpose! :p This wednesday maybe a more elaborate video when the 2nd revision model comes in!

HtheB 2014-02-04 20:53
Re: [WIP] Producing Qwerty OtherHalf --pre-ordering started! --order counter:55 --video in first post
 
dirkvl, will you be using (modifying) the official Jolla OtherHalf 3D model that Jolla has released?

dirkvl 2014-02-04 21:03
Re: [WIP] Producing Qwerty OtherHalf --pre-ordering started! --order counter:55 --video in first post
 
Quote:
Originally Posted by HtheB (Post 1410978)
dirkvl, will you be using (modifying) the official Jolla OtherHalf 3D model that Jolla has released?
Perhaps! Depends on the quality of the parts coming in tomorrow. If they fit perfectly, they are +- the same shape as the released model.

Still have to look into them, but it *could be* that it is cumbersome to modify them, as they are not in Solidworks format. But that is pure speculation! :)

So: definitely yes, or maybe no. Sometimes.

http://media.giphy.com/media/ALvdHigd2gBqw/giphy.gif

carharttguy 2014-02-05 08:08
Re: [WIP] Producing Qwerty OtherHalf --pre-ordering started! --order counter:55 --video in first post
 
Any chance on an Azerty OtherHalf? :)

dirkvl 2014-02-05 08:33
Re: [WIP] Producing Qwerty OtherHalf --pre-ordering started! --order counter:55 --video in first post
 
Quote:
Originally Posted by carharttguy (Post 1411061)
Any chance on an Azerty OtherHalf? :)
no...


10chars

dirkvl 2014-02-05 12:16
Re: [WIP] Producing Qwerty OtherHalf --pre-ordering started! --order counter:55 --video in first post
 
https://vimeo.com/85914466

F2thaK 2014-02-05 13:44
Re: [WIP] Producing Qwerty OtherHalf --pre-ordering started! --order counter:60 --video in first post
 
you sir, are a genuis

bill_klpd 2014-02-05 17:15
Re: [WIP] Producing Qwerty OtherHalf --pre-ordering started! --order counter:60 --video in first post
 
Great work dirkvl! I wish I had a jolla right now :p

Is it possible to have a hole in the centre of the other half for the camera/flash or it will have the board under of these?


All times are GMT. The time now is 04:54.
Page 48 of 81 « First 384647 48 495058 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8