| Prev |   1   2   3   | Next
maemo.org - Talk
Page 2 of 3
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N900 (https://talk.maemo.org/forumdisplay.php?f=44)
-   -   briked N900 with strange loop boot (https://talk.maemo.org/showthread.php?t=91791)

ehsantlk 2013-11-13 16:33
Re: briked N900 with strange loop boot
 
Quote:
Originally Posted by freemangordon (Post 1386040)
ACT_DEAD means it is charging
ok. is it ok while I dont plug it into the charger?

is it important to battery has fully charged before flash the device?
or is just for to be sure

nokiabot 2013-11-13 16:35
Re: briked N900 with strange loop boot
 
Yesterday i tried hard to flash one with exact condition could not succed as m lame with terminal then fired up infinity it did the job :) i flashed rootfs only then reset after that flashed both but it stuck then flashed nolo bootloader and then the files it came to life:)

nokiabot 2013-11-13 16:44
Re: briked N900 with strange loop boot
 
@freemango now i have a n900 that shows nokia logo as soon as i put the battery and stays like that so what coud be wrong ? Is it hardware or software any help btw the usb port is ripped off and i also dont know how it happend.

nokiabot 2013-11-13 16:47
Re: briked N900 with strange loop boot
 
@ freemango instruct him in simple way to flash nolo then the file it coud do the job :)

nokiabot 2013-11-13 16:50
Re: briked N900 with strange loop boot
 
Well i found a infinity crack let me check twmorrow if it works via usb without any ufs cyclone or jaf connected.:)

freemangordon 2013-11-13 16:51
Re: briked N900 with strange loop boot
 
nolo is just fine if he can see that device enters ACT_DEAD mode

@ehsantlk - please, follow the flashing guide on maemo wiki and post the result. Flash both fiasco and EMMC

ehsantlk 2013-11-13 16:54
Re: briked N900 with strange loop boot
 
Quote:
Originally Posted by freemangordon (Post 1386053)
nolo is just fine if he can see that device enters ACT_DEAD mode

@ehsantlk - please, follow the flashing guide on maemo wiki and post the result. Flash both fiasco and EMMC
ok. but I just want to battery getting fully charged and I will do that
it's maybe take a while .

nokiabot 2013-11-13 17:02
Re: briked N900 with strange loop boot
 
Now do tell me something whats up with the n900 i currently have should i go and solder wires to a rj45 connector or check every lame connections i find for low or high voltages disconections shorts etc. Pretty low on time this week help appreciated.

ehsantlk 2013-11-13 21:07
Re: briked N900 with strange loop boot
 
Quote:
Originally Posted by freemangordon (Post 1386053)
nolo is just fine if he can see that device enters ACT_DEAD mode

@ehsantlk - please, follow the flashing guide on maemo wiki and post the result. Flash both fiasco and EMMC
ok. I fully charged the battery

""""""""""""""""""""""""""""""""""""""""""""
sudo flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f

flasher v2.5.2 (Oct 21 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus 002, device address 006.
Found device RX-51, hardware revision 2204
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2_PR_MR0
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus 002, device address 007.
Raw data transfer EP found at EP2.
Image(s) flashed successfully in 28.737 s (8906 kB/s)!
'''''''''''''''''''''''''''''''''''''''''''''''''' '''''''''''''''''''''''''''''''''''''''''''''''''' '''''''''''''''''
at this point I unplug the usb and taking out the battery for about 10 seconds

"""""""""""""""""""""""""""""""""""""""""""""""""" """""""
sudo flasher-3.5 -F RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f

flasher v2.5.2 (Oct 21 2009)

SW version in image: RX-51_2009SE_20.2010.36-2_PR_MR0
Image 'kernel', size 1705 kB
Version 2.6.28-20103103+0m5
Image 'rootfs', size 185728 kB
Version RX-51_2009SE_20.2010.36-2_PR_MR0
Image 'cmt-2nd', size 81408 bytes
Version BB5_09.36
Image 'cmt-algo', size 519808 bytes
Version BB5_09.36
Image 'cmt-mcusw', size 5826 kB
Version rx51_ICPR82_10w08
Image '2nd', size 14720 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.9+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2307, 2308, 2309, 2310
Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2307, 2308, 2309, 2310
Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2307, 2308, 2309, 2310
Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2407, 2408, 2409, 2410
Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2407, 2408, 2409, 2410
Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2407, 2408, 2409, 2410
Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
Version 1.4.14.9+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2607, 2608, 2609, 2610
Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2607, 2608, 2609, 2610
Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2607, 2608, 2609, 2610
Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2507, 2508, 2509, 2510
Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2507, 2508, 2509, 2510
Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2507, 2508, 2509, 2510
Version 1.4.14.9+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.9+0m5
Suitable USB device not found, waiting.
USB device found found at bus 002, device address 009.
Found device RX-51, hardware revision 2204
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2_PR_MR0
Sending xloader image (14 kB)...
100% (14 of 14 kB, avg. 3625 kB/s)
Sending secondary image (106 kB)...
100% (106 of 106 kB, avg. 13359 kB/s)
Flashing bootloader... done.
Sending cmt-2nd image (79 kB)...
100% (79 of 79 kB, avg. 11357 kB/s)
Sending cmt-algo image (507 kB)...
100% (507 of 507 kB, avg. 20305 kB/s)
Sending cmt-mcusw image (5826 kB)...
100% (5826 of 5826 kB, avg. 22939 kB/s)
Flashing cmt-mcusw... done.
Sending kernel image (1705 kB)...
100% (1705 of 1705 kB, avg. 13222 kB/s)
Flashing kernel... done.
Sending and flashing rootfs image (185728 kB)...
100% (185728 of 185728 kB, avg. 15946 kB/s)
Finishing flashing... done
CMT flashed successfully
"""""""""""""""""""""""""""""""""""""""""""""" """"
again I unplug the cable and remove the battery for about 10 sec
then I start the N900 phone . I got NOKIA logo and then five dots come for few second , after that screen getting dim(I still can see 5 dots )at this time yellow light blink for 2 time and then vibrate and NOKIA logo come again
I Hope you can find out what's wrong

freemangordon 2013-11-13 21:15
Re: briked N900 with strange loop boot
 
@ehsantlk:
try to flash rootfs, EMMC, rootfs

without reboot in between

EDIT:

you may want to join #maemo on freenode.net and ask for further help there if ^^^ doesn't help


| Prev |   1   2   3   | Next
All times are GMT. The time now is 18:43.
Page 2 of 3
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8