maemo.org - Talk - LED pattern modification

maemo.org - Talk (https://talk.maemo.org/index.php)

- SailfishOS (https://talk.maemo.org/forumdisplay.php?f=52)

- - LED pattern modification (https://talk.maemo.org/showthread.php?t=92194)

LED pattern modification

Someone mentioned blinking LED on battery full being a nuisance, /etc/mce/20hybris-led.ini seems to contain LED patterns, so modifying

Code:

PatternBatteryFull=40;4;0;500;2500;ffffff

Code:

PatternBatteryFull=40;4;0;0;0;00ff00

should result in non-blinking green, to distinguish it from charging indicator, yet it is blue just like the charging one... hmmm. Nope, after getting email it is green now as expected. Standard warnings apply, your Jolla might explode if you blink while editing that file

Re: LED pattern modification

ah good ! Thank you very much !

Re: LED pattern modification

You can also disable LED notifications you don't want active.

Disable email LED notifications:

Code:

LEDPatternsDisabled=PatternDeviceOn;PatternCommunicationEmail

LEDPatternsDisabled variable can be found in the end of the ini file.

Can't emphasize this too much:
In the past wrong or missing characters in the mce.ini have been able to put the devices into boot loop at next reboot.