maemo.org - Talk
Page 17 of 45 « First 71516 17 181927 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   The Other Half (https://talk.maemo.org/forumdisplay.php?f=59)
-   -   Jolla OtherHalf OLED display / toholed (https://talk.maemo.org/showthread.php?t=92239)

tommo 2014-01-31 07:59
Re: [WIP] Jolla OtherHalf OLED display (POLL!!!)
 
Quote:
Originally Posted by kimmoli (Post 1409914)
I think i know now who are in the first four.

Please check that you have voted 'yes' in Poll, or you will be dropped out.
One of the first has not voted.

There is still some things that has to be clarified before i can sell these, but assembly will start during weekend.

The 3D print is still open - is sculpteo good enough? i did reorder sample and it should come next week.
cant wait!
btw you should have copyright on the doodle face, just someone at crackberry with the same!

Bundyo 2014-01-31 08:47
Re: [WIP] Jolla OtherHalf OLED display (POLL!!!)
 
Quote:
Originally Posted by kimmoli (Post 1409914)
The 3D print is still open - is sculpteo good enough? i did reorder sample and it should come next week.
While I like the polished plastic on Sculteo, it is rather rough and feels like paper on touch.

As I've said to dirkvl, I've heard that i.materialise.com is better quality-wise, though never ordered from them. Both sites offer sample kits for 30 EUR with 25 EUR off voucher for next purchase, so it is rather the same on that front if you stick with the one you get the samples from.

On the shipping side, i.materialise is better - they offer one day shipping for 14 EUR and 5 day for 13, while Sculpteo only have 12 EUR for one week (or more).

andreas1 2014-01-31 08:55
Re: [WIP] Jolla OtherHalf OLED display (POLL!!!)
 
I am surely interested to have one,

just a few questions (faq to first post :))

What is the increase in weight compared to a normal toh-jolla?
what is the increase in "thickness" compared to a normal toh-jolla?
Is there any estimation concerning battery usage?
Will the toh be without the meme-head?
Will the "quality" of toh surcface be polished like in a normal toh-jolla compared to the demo-version, which seems a bit "unpolished"?
https://lh3.googleusercontent.com/-B...o/14010025.jpg

-
Edit. added more questions.

kimmoli 2014-01-31 20:01
Re: [WIP] Jolla OtherHalf OLED display (POLL!!!)
 
Here are some answers
  • What is the increase in weight compared to a normal toh-jolla?
    with my current PLA printed one, weight increase is 2 g (total 143 g)
  • what is the increase in "thickness" compared to a normal toh-jolla?
    About +1.8 mm (new thickness 11.7 mm ,original by spec 9.9 mm)
  • Is there any estimation concerning battery usage?
    Some results, see here
  • Will the toh be without the meme-head?
    See post #1. It will be available with or without (It will be on inside anyway)
  • Will the "quality" of toh surcface be polished like in a normal toh-jolla compared to the demo-version, which seems a bit "unpolished"?
    TBD (demo is printed with my own printer.) Still looking for best supplier.
    But it is kinda ok for me. not so slippery as the original toh. but looks like "selfmade" when taking a closer look.

minimos 2014-01-31 21:49
Re: [WIP] Jolla OtherHalf OLED display (POLL!!!)
 
Quote:
Originally Posted by kimmoli (Post 1410089)
[*]what is the increase in "thickness" compared to a normal toh-jolla?
About 11.7 mm (Original by spec 9.9 mm)
I hope you mean that the total thickness will be 11.7 mm, not that the *increase* will be 11.7 mm. Right?

xkkkx 2014-01-31 23:19
Re: [WIP] Jolla OtherHalf OLED display (POLL!!!)
 
Quote:
Originally Posted by minimos (Post 1410136)
I hope you mean that the total thickness will be 11.7 mm, not that the *increase* will be 11.7 mm. Right?
I think that's the case as he is comparing directly the original total thickness 9.9mm to TOHOLED 11.7mm

Rauha 2014-01-31 23:26
Re: [WIP] Jolla OtherHalf OLED display (POLL!!!)
 
Is it not pretty clear from the pictures that total thickness won't increase by 118%?

Phone + TOHOLED = 11,7mm

Bundyo 2014-02-01 07:40
Re: [WIP] Jolla OtherHalf OLED display (POLL!!!)
 
Well, he could have fit an Arduino in those 1.1cm :)

kimmoli 2014-02-01 07:41
Re: [WIP] Jolla OtherHalf OLED display (POLL!!!)
 
Quote:
Originally Posted by matimilko (Post 1409561)
Great work!
For TOH with ink paper, You can count me in!!!
So does this mean that you'll wait for that and skip oled?

kimmoli 2014-02-01 17:33
Re: [WIP] Jolla OtherHalf OLED display
 
1 Attachment(s)
I tried i-materialise --> not like. :(

first it took several hours to get my account confirmation link.

Then it says minimum wall thinkness 0.8 - 1mm, detail 0.3mm tolerances +/-0.3mm

And then very limited color selections; and this part is too large to be polished (tumbled)

But finally got test of natural polyamide ordered. lets see.


All times are GMT. The time now is 20:45.
Page 17 of 45 « First 71516 17 181927 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8