Re: [Intex][LTE] European LTE bands on Intex
 

I also ended up with a phone in boot loop, when fiddling with NV Items with QPST and QXDM tools. It seems that in this state, phone reboots when the modem picsk up the GSM signal. Removing SIM doesn't help, becouse the modem is still trying to register with any network for emergency call. So, what helped was to find a place with NO GSM signal from any provider, so the modem has no chance to carry any network (I'm living in small vilage at countryside, so I've had no problem to find such place). Or alternatively you can try to place the phone into something like farraday cage etc. When the phone has no chance to catch any GSM network it doesn't reboot, so then I was able to set the NV Items back to correct values and after writing them and power-cycling the phone, the reboot loop is gone and the phone works just as before. But obviously still without the european LTE support...

Re: [Intex][LTE] European LTE bands on Intex
 

I had same problem when trying to play with NV values, but i did not tried to find no-coverage place. I just was so fast to wrive nv back in couple of seconds when phone booted :D

Re: [Intex][LTE] European LTE bands on Intex
 

...but I'm an idiot and the first thig I did was .... restore factory default...so no development mode and no usb diagnostic....:o

I'm trying this way but till now I wasn't able to find a place without GMS signal...not even a microwave oven in garage...:(

In any case....thankyou guys for your suggestions

Re: [Intex][LTE] European LTE bands on Intex
 

elevator is the way

Re: [Intex][LTE] European LTE bands on Intex
 

Finally I got it :-).
Reboot in recovery mode, start a shell, remove ofono service at startup, reboot....:D

Thank you very much @jamar for the right suggestion !!!
Now I've my phone back and can try a lot of other dangerous things :p

Re: [Intex][LTE] European LTE bands on Intex
 

You did something wrong. Here is the whole procedure discribed.
Here is also discribed, how do you go back for the intex Modem Firmware:

https://together.jolla.com/question/...tex-aqua-fish/

Re: [Intex][LTE] European LTE bands on Intex
 

There are a lot of posibilities in this thread. Which part have you used exactly? can you give an answer date or number or something?
thanks

Re: [Intex][LTE] European LTE bands on Intex
 

Yes...I wrote some posts on that thread....but the problem here wasn't related to droid-modem-l500d-(in|eu).
In this case my phone entered in boot-loop after I played with NV values (and the droid-modem wad already "in" version).

Re: [Intex][LTE] European LTE bands on Intex
 

i downloaded the both files (in & eu),
extracted the content of the eu file
copied the extracted files to the necessary places
run flash-modem.sh

Rebooted the phone.
Saw that i couldn't connect to any network
did the same procedure for the modem-in file (restored indian modem firmware back)
rebooted phone.

LTE in Germany only with T-Mobile :-(
o2, e-plus, Vodafone : 3G :-(

Re: [Intex][LTE] European LTE bands on Intex
 

@ZLooM. ZLooM from maemo.su it's You or not? :)

Re: [Intex][LTE] European LTE bands on Intex
 

I have a problem with authorization to download files from this point "curl -c /tmp/cookie.jar -b /tmp/cookie.jar -L -v -k -H 'Authorization: Basic xxxxxxxxxxxxxxxx' https://store-repository.jolla.com/r...ata/repomd.xml."

Explain me please this moment.

Thanks for advance.

Re: [Intex][LTE] European LTE bands on Intex
 

I also speak russian, but thats not me :-)

Re: [Intex][LTE] European LTE bands on Intex
 

Download the packages with:
pkcon download [download-path] [name of the package]
You dont need to use curl.
just download the packages and extract them with rpm2cpio

Re: [Intex][LTE] European LTE bands on Intex
 

It's message for ZLooM :-) manual from maemo.su is made by ZLooM.

Re: [Intex][LTE] European LTE bands on Intex
 

maybe I don't understood. It's this pack droid-modem-l500d-eu-0.0.8.2-10.8.1.jolla.armv7hl.rpm? I receive "Command failed: This tool could not find the package" (for PC and Intex Terminals) after pkcon download.

Re: [Intex][LTE] European LTE bands on Intex
 

Yes =) it's me

Re: [Intex][LTE] European LTE bands on Intex
 

просто меня смутили даты. на maemo.su мануал от 26.08.16, а на TJC ответ от 28.08.16 о неудачном опыте без ссылки на сам мануал(нуу или я слепой).

and I don't understood - how to do: from maemo.su or from TJC?

Re: [Intex][LTE] European LTE bands on Intex
 

i used this command for downloading:

pkcon download /home/nemo/Downloads droid-modem-l500d-eu
pkcon download /home/nemo/Downloads droid-modem-l500d-in

Re: [Intex][LTE] European LTE bands on Intex
 

Да меня смутил человек с билайном и моя Йота, которая как оказалось некоторое время ловила исключительно дома. Хотя не должна была в принципе этого делать.

Re: [Intex][LTE] European LTE bands on Intex
 

:-( see attach(screenshot) 9.6GB free. other dir. why?

Re: [Intex][LTE] European LTE bands on Intex
 

т.е. на tjc это кто-то другой, получается?

Re: [Intex][LTE] European LTE bands on Intex
 

just create folder pk-zypp-cache

Re: [Intex][LTE] European LTE bands on Intex
 

нет это я же.

Re: [Intex][LTE] European LTE bands on Intex
 

don't work. I don't understand - I specify one dir, pkcon refers to other.

Re: [Intex][LTE] European LTE bands on Intex
 

#MOD NOTICE#

Had some reports requesting that a reminder be placed, just a reminder folks, this is an English forum;

No offence to those for whom English isn't your primary language, but the majority of members speak English, or they speak it as a secondary language.

Non-English is fine for several posts, but not excessive usage please...

Re: [Intex][LTE] European LTE bands on Intex
 

sorry. but english for me is a problem and these messages are offtopic slightly.

Re: [Intex][LTE] European LTE bands on Intex
 

Delete cache in this folder (Remove all files from the cache folder)

Afterwards:
pkcon refresh

Afterwards download the both modem files

Re: [Intex][LTE] European LTE bands on Intex
 

in /var/cache/ ? as root?

it's made. reboot. don't work, see attach.

why in Root dir(1.1GB free), not in ~/Downloads(9.6GB free)?

Re: [Intex][LTE] European LTE bands on Intex
 

Are you entering this commands as devel-su ?

Enter thanthanFor me it works without any problems....

Re: [Intex][LTE] European LTE bands on Intex
 

"then" :)

"Than" is for comparison: "Jack is taller than Jill."
"Then" is for time relation: "And then it happened."

(Since we are talking about English as a foreign language... :cool:)

Re: [Intex][LTE] European LTE bands on Intex
 

not, but I made this now.
- devel-su
- rm in /var/cache
- pkcon refresh
- chmod...
- pkcon download...
I have "Fatal error: Insufficient space in download directory /var/cache/pk-zypp-cache/packages/adaptation0"

I made also
- rm in /var/cache
- chmod...
-pkcon download...
I have the same "Fatal error: Insufficient space in download directory /var/cache/pk-zypp-cache/packages/adaptation0"

BUT! This directory packages/adaptation0" don't exist in both cases.
I see /var/cache/pk-zypp-cache/raw/adaptation0 and /var/cache/pk-zypp-cache/solv/adaptation0 after "pkcon refresh".

Re: [Intex][LTE] European LTE bands on Intex
 

sorry.
i think it has smth. to do with autocorrection. I wrote it on a translation-mac with 8 languages installed.
it corrects anything in any possible languages while typing.... ;-)
Bad computer.....

Re: [Intex][LTE] European LTE bands on Intex
 

1. something is bad with your repositories.
2. Package related operations like zypper / pkcon i would run always as devel-su (root)
3. adaptation0 repository MUST be present on any device
4. run:

ssu lr

look for the repositories adaptation0 and adaptation1. are they there?

5. if it doesnt help:
Disable all patches, make full system upgrade to 2.0.2.51

devel-su
ssu re 2.0.2.51
ssu ur
version --dup

Re: [Intex][LTE] European LTE bands on Intex
 

4. Yes, they are.
5. System is upgaded to 2.0.2.51. Reinstall? with these commands?

I don't use patches. I use phone for 10 days only. I try to migrate from N9. LTE isn't important for this moment and one local operator use band3, but it isn't my case.

how to determine audio chip? dmesg | grep -i audio don't work for me.

Re: [Intex][LTE] European LTE bands on Intex
 

yes try to re-run upgrade to 2.0.2.51 again
with
devel-su
ssu re 2.0.2.51
version --dup

i think smth. is missing...


i'm also not the best sailfish guru, maybe you ask some of our gurus, like Coderus.
You can write him PM in russian btw.

Re: [Intex][LTE] European LTE bands on Intex
 

likewise. don't work. reset device remains. but not now.

I know but it's impossible here :-) and I haven't others contacts. twitter, vk, fb etc. aren't my variants. we'll see.

Thanks for help.

Re: [Intex][LTE] European LTE bands on Intex
 

I made "Reset device"(to v.2.0.2.45), install only File_Browser.
As root or not but error remains the same for me. It's impossible to download.

Re: [Intex][LTE] European LTE bands on Intex
 

write your email in the post. i try to download it for you.
buy the way, have you active jolla account?

Re: [Intex][LTE] European LTE bands on Intex
 

I wrote a private msg. Thanks :-)
Yes, else Store is unavailable.

Re: [Intex][LTE] European LTE bands on Intex
 

What do you mean "Store is unavaiable"?

Have you created Jolla account ?
Do you have access to jolla store and can download apps from jolla store?

if not - this is your problem.
you should create jolla account and password, otherwise you will not be able to download importand things, like system updates...